windshield wipers HONDA FIT 2016 3.G Quick Guide

36 || 37
V
EHICLE CONTROLS
VEHICLE CONTROLS
Exterior Lights
Rotate the switches on the headlight lever to operate the exterior lights. Push the
lever forward to turn on the high beams. Return the lever to its original position for  low beams. OFF: All exterior lights are off.
: Turn on exterior lights except headlights.
AUTO:  Turn on the automatic lighting feature*. 
Headlights turn on or off depending on ambient  brightness when the vehicle is on. Headlights automatically come on after the wipers are engaged for a certain time.
: Turn on all exterior lights including headlights.
: Turn fog lights* on or off.
*if equipped
One-Touch Turn Signal
Use this quick and convenient method to signal a lane change. Lightly push the turn signal lever up or down for a three-blink sequence. For a continuous signal, push the lever up or down until it locks into place.
Left turn
Right turn
High beams
Low beams Flash the high beams
Fog lights*
Wiper Operation
The windshield wipers and washers can be used when the vehicle is on.
Front Wipers
Move the wiper lever up or down to the desired position.
Headlight-Wiper Integration*
When the headlights are in the AUTO position, they automatically turn on when the front wipers operate several times within a certain interval. The headlights turn off shortly after the wipers are turned off, or if there is enough
ambient light.
Rear Wiper
Rotate the end of the wiper lever to the desired position. When you shift to Reverse (R) and the front wipers are activated, the rear wiper activates even if the switch is off.
Do not use the wipers when the windshield is dry. The windshield will get  scratched, or the rubber blades will get damaged.
In cold weather, the blades may freeze to the windshield, becoming stuck.  Operating the wipers in this condition may damage the wipers. Use the
defroster to warm the windshield, or manually clear the windshield of ice and snow before turning on the wipers.
NOTICE
*if equipped
Pull to use
washer.
 MIST OFF
 INT: Low speed intermittent LO: Low speed wipe HI: High speed wipe
OFF
INT: Intermittent wipeON: Continuous wipe
Washer