navigation system HONDA ODYSSEY 2011 RB3-RB4 / 4.G User Guide

µ
µ µ
Each preset button can
store one f requency on AM and two
f requencies on FM.
Select the desired band, AM or
FM. You can store one f requency
on FM1, and one f requency on
FM2witheachpresetbutton.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Push the SETUP button to display
the setup MENU. Turn the selector
knob to select Auto Select, then
press the selector knob. The display
changes to the auto select mode.
Select ‘‘PUSH TO START’’ or ‘‘ON,’’
then press the selector knob. You
will see Auto Select on the display,
and the system goes into the auto
select mode f or several seconds.
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described.
1.
2.
3.
4. Preset
SCAN AUTO SELECT
Playing the FM/AM Radio (EX, EX-L models without navigation system)254
10/07/17 10:08:23 31TK8600_259
2011 Odyssey

On the FM band, you can select a
favorite station and display the
program service name provided by
the radio data system (RDS).
You will see ‘‘0’’ displayed if auto
select cannot f ind a strong station f or
every preset button.
select Auto
Select on the setup menu again and
turn the selector knob to select
‘‘PUSH TO CANCEL’’ or ‘‘OFF,’’
then press the selector knob. This
restores the presets you originally
set.
For inf ormation on FM/AM radio
f requencies and reception, see . The RDS inf ormation display
f unction shows the name of the RDS
station you are listening to. With the
audio system on and the FM band
selected, you can turn this f unction
on or of f .
To switch the function between on
and off, press and release the TITLE
button. With the system on, you will
see the ‘‘RDS INFO ON’’ message
briefly on the display. If the station
you are listening to is an RDS station,
the display shows the station name.
To cancel auto select,
On EX models
CONT INUED
Radio Data System (RDS)RDS INFO Display
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Features
255
U.S. EX models
EX-L and Canadian EX models
10/07/17 10:08:32 31TK8600_260
page409
2011 Odyssey

µ´
If the station you are listening to is
not an RDS station, the display
continues to show the f requency
with the PS name display function on.
CLASSIC: Classical music
JAZZ: Jazz
INFO: News, inf ormation, sports,
talk shows, f oreign language,
personality, public, college, and
weather
TRAFFIC: Traffic information
On the FM band selected, you can
select the program category
provided by the RDS. Press either
side ( or ) of the FOLDER bar
or the CATEGORY bar to display
and select an RDS category. The
principal RDS categories are shown
as f ollows:
RELIGION: Programs concerned
with religion R & B: Rhythm and blues, and sof t
rhythm and blues OLDIES: Nostalgia music and oldies TOP 40: Top 40 hits
SOFT: Adult hits and sof t music
COUNTRY: Country music ROCK: Rock, classic rock and sof t
rock music ALL: All RDS category stations
Press either side of the FOLDER bar
or the CATEGORY bar to select an
RDS category. The display shows
the selected RDS category name for
about 10 seconds. You can use the
search or scan f unction to f ind radio
stations on the selected RDS
category. If you do nothing while the
RDS category name is displayed, the
selected category is canceled.
When you turn of f this f unction by
pressing the TITLE button, the
display brief ly shows ‘‘RDS NAME
OFF.’’
You can turn of f this f unction by
pressing the TITLE button. If the station you are listening to is
an RDS station, the RDS icon
appears in the display. To switch the
f unction between on and of f , press
and release the TITLE button. With
the system on, you will see the
station name on the display.
On EX-L models
Radio Data System (RDS) CategoryPlaying the FM/AM Radio (EX, EX-L models without navigation system)256
10/07/17 10:08:44 31TK8600_261
2011 Odyssey

This f unction searches up and down
a f requency f or the strongest signal
f rom the f requencies that carry the
selected RDS category inf ormation.
This can help you to find a station in
your favorite category. To activate it,
press either side of the FOLDER bar
to select an RDS category, then
press and release either side
( or ) of the SKIP bar. You
will see the selected RDS category
name blinking while searching it.
When the system finds a station, the
selected RDS category name will be
displayed again for about 10 seconds.The scan f unction samples all
stations with strong signals on the
selected RDS category. To activate it,
press either side of the FOLDER bar
or the CATEGORY bar to select an
RDS category, then press and
release the SCAN button. You will
see SCAN in the display. The system
will scan f or a station with a strong
signal in the selected RDS category.
You will also see the selected RDS
category name blinking while
searching it. When it f inds a strong
signal, it will stop and play that
station f or about 10 seconds.
If the system does not find a station,
‘‘NOTHING’’ will be blinking f or
about 5 seconds, then the system
goes back to the last selected station. If the system does not find a station,
‘‘NOTHING’’ will be blinking f or
about 5 seconds, then the system
goes back to the last selected station.
You can use the RDS program
search or scan f unction even if the
RDS inf ormation display f unction
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
RDS Program SCAN
RDS Program Search
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Features
257
10/07/17 10:08:51 31TK8600_262
is of f .
2011 Odyssey

µµ
µ
µ
µ
µ
Press the SETUP button to display
the sound settings. Turn the selector
knob to select an appropriate setting:
BASS, TREBLE, FADER,
BALANCE, SUBW (subwoof er), and
SVC (speed-sensitive volume
compensation). Press the selector
knob to enter the setting, then turn
the selector knob to adjust the
setting. Press the SETUP button to display
the Setup menu. Turn the selector
knob to select Sound Settings, then
press the selector knob. Turn the
selector knob to select an
appropriate setting: Bass, Treble,
Fader, Balance, Subwoof er, and SVC
(speed-sensitive volume
compensation). Press the selector
knob to enter the setting, then turn
the selector knob to adjust thesetting. Press the selector knob
again to set your setting.
Adjusts the volume level
basedonthevehiclespeed. Adjusts
the strength of sound from the
subwoof er speaker. Adjusts the side-to-
side strength of the sound. Adjusts the front-to-back
strength of the sound. Adjusts the treble.
Adjusts the bass.
On EX models
On EX-L modelsPlaying the FM/AM Radio (EX, EX-L models without navigation system)Adjusting the Sound
SVC SUBW (SUBWOOFER) BAL ANCE
FADER TREBLE
BASS258U.S. EX modelsEX-L and Canadian EX models
10/07/17 10:09:00 31TK8600_263
2011 Odyssey

Eachmodeisshowninthedisplayas
it changes. Turn the selector knob to
adjust the setting to your liking.
When the level reaches the center,
you will see ‘‘C’’ in the display.The SVC mode controls the volume
based on vehicle speed. The f aster
you go, the louder the audio volume
becomes. As you slow down, the
audio volume decreases.
The SVC has f our modes: SVC OFF,
SVC LOW, SVC MID, and SVC
HIGH. Turn the selector knob to
adjust the setting to your liking. If
you f eel the sound is too loud,
choose low. If you f eel the sound is
too quiet, choose high. You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f .
To return to normal play, push the
RETURN or SETUP button af ter you
stop adjusting a mode. 140On U.S. EX models
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Speed-sensit ive Volume
Compensat ion (SVC)
A udio System L ighting
Features
259
10/07/17 10:09:07 31TK8600_264
2011 Odyssey

Playing the XM
Radio (EX-L model without navigation system)
Wit hout rear ent ert ainment syst emWit h rear ent ert ainment syst em260
RETURN
BUTTONSCAN
BUTTON
SKIP BAR TITLE
BUTTON
SCAN
BUTTON
SKIP BAR
RETURN
BUTTON TITLE
BUTTON PRESET BUTTONS
XM BUTTON
POWER/
VOLUME
KNOB
SETUP
BUTTON CATEGORY
BAR PRESET BUTTONS
XM BUTTON
SELECTOR KNOB SELECTOR KNOBCATEGORY
BAR
POWER/
VOLUME
KNOB
SETUP
BUTTON
10/07/17 10:09:15 31TK8600_265
2011 Odyssey

µ
To listen to XM Radio, turn the
ignition switch to the ACCESSORY
(I) or ON (II) position, and press the
button. The last channel you
listened to will show in the display.
Adjust the volume by turning the
power/volume knob.
XM Radio receives signals f rom two
satellites to produce clear, high-
quality digital reception. It of f ers
many channels in several categories.
Along with a large selection of
dif f erent types of music, XM Radio
allows you to view channel and
category selections in the display. Your vehicle is capable of receiving
XM
Radio anywhere in the United
States and Canada, except Hawaii,
Alaska,andPuertoRico.XMisa
registered trademark of Sirius XM
Radio,Inc.andXMCANADA
is a
registered business name of
Canadian Satellite Radio Inc. You can also change the mode from
the setup menu. Press the SETUP
button to display the setup menu.
Turn the selector knob to select XM
Mode and press the selector knob.
You can select Channel mode or
Category mode by turning and
pressing the selector knob.
Each time you press and release the
TITLE button, the display changes
f rom artist name to song name.
You may experience periods when
XM Radio does not transmit the
artist’s name and song title
inf ormation. If this happens, there is
nothing wrong with your system.
To switch between
channel mode and category mode,
either press and hold the TITLE
button until the mode changes.
In the channel mode, you can select
all of the available channels. In the
category mode, such as Jazz, Rock,
Classical, etc., you can select all of
the channels within that category.
CONT INUED
Operating the XM Radio
MODE
Playing the XM
Radio (EX-L model without navigation system)
Features
261
10/07/17 10:09:23 31TK8600_266
2011 Odyssey

µµ´µ
µ
The SCAN f unction gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the stations within that
category are scanned. To activate
scan, press the SCAN button. The
system plays each channel in
numerical order f or a f ew seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
button again. Press
either side of the CATEGORY bar to
select another category.
Turn the selector knob to
change channel selections. Turn the
knob right f or higher numbered
channels and lef t f or lower
numbered channels. In the category
mode, you can only select channels
within that category.
You can also select a channel from
the list by using the selector knob.
Push the selector knob to switch the
display to the list, then turn the knob
to select a channel. Press the
selector knob to set your selection.SCAN CAT EGORY ( or )
TUNE
Playing the XM
Radio (EX-L model without navigation system)
262
10/07/17 10:09:28 31TK8600_267
2011 Odyssey

µµ
µ
µ
µ µ
µ
µ
Youcanstoreupto12
preset channels using the six preset
buttons. Each button stores one
channel f rom the XM1 band and one
channel f rom the XM2 band.
To store a channel: Press the button. Either
XM1 or XM2 will show in the
display. Repeat steps 2 and 3 to store the
f irst six channels.
Once a channel is stored, simply
press and release the proper preset
button to tune to it. Press the button again.
The other XM band will show.
Store the next six channels using
steps 2 and 3.
The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
The selected
channel has no artist or title
inf ormation at this time.
XM is loading the
audio or program inf ormation.
The channel
currently selected is no longer
broadcasting. The
encryption code is being updated.
Wait until the encryption code is
f ully updated. Channels 0 and 1
should still work normally.
There is
a problem with the XM antenna.
Please consult your dealer.
Use the selector knob, SKIP bar,
CATEGORYbarorSCANbutton
to tune to a desired channel.
The selected
channel number does not exist, is
not part of your subscription, or this
channel has no artist or title
inf ormation at this time.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
Pick the preset button you want
f or that channel. Press and hold
the button until you hear a beep.
3. 4.
5.
2. 1.
CONT INUED
Preset
XM Radio Display Messages ‘‘NO SIGNA L ’’
‘‘NO INFO’’
‘‘L OA DING’’
‘‘OFF A IR’’ ‘‘UNA UT HORIZED’’
‘‘CHECK A NT ENNA ’’ ‘‘UNA VA IL A BL E’’
Playing the XM
Radio (EX-L model without navigation system)
Features
263
10/07/17 10:09:41 31TK8600_268
2011 Odyssey