key HONDA ODYSSEY 2011 RB3-RB4 / 4.G Service Manual

CONT INUED
Bluetooth
HandsFreeL ink
(Models with navigation system)
Features
521
Auto Answer
Auto Transfer
Clear PhoneInformation
Phone
Phone Setup Create a phone name/PIN number for a paired phone.
Set calls to automatically transfer from your phone to HFL when you enter the vehicle.
Phone Name/
PIN
Set incoming calls to be automatically answered.
Clear the system of all paired phones, phonebook entries, speed dials, and pass-keys.
Press and release the Talk button each time you give a command. Voice commands can be used for all above options.
10/07/17 10:44:23 31TK8600_526
2011 Odyssey

To pair a cell phone (when there are oneor more phones paired to the system):
HFL gives you a 4-digit pass-key
that you will need to input on your
phone.
When your phone prompts you,
input the 4-digit pass-key.
You will receive a notif ication on
the screen and your phone if
pairing is successf ul. Select ‘‘Phone Setup’’ f rom the
Phone screen.
Select ‘‘Connection’’ f rom the
Phone Setup screen.
Select ‘‘Add New Phone.’’
If your phone doesn’t appear on
the list, select ‘‘Phone not f ound?’’
and search f or Bluetooth devices
using your phone. From your
phone, select ‘‘HandsFreeLink.’’ If your phone is f ound, it is
displayed on the screen. Select it
and press ENTER.
2.
3. 1.
5.
3.
4. 6.
7.
Bluetooth
HandsFreeL ink
(Models with navigation system)
524
U.S. model is shown.
10/07/17 10:44:48 31TK8600_529
2011 Odyssey

CONT INUED
To change the pass-key setting:
Select ‘‘Connection’’ f rom the
Phone Setup screen.
Select ‘‘Pass-key.’’The def ault pass-key ‘‘0000’’
is used until you change the setting.
For a randomly generated pass-key
each time you pair a phone, select
‘‘Random.’’
Up to six phones can be paired.
Your phone’s battery may drain
f aster when it is paired to HFL. You cannot pair your phone while
the vehicle is moving.
Select one of the six entries on the
list. Make sure your phone is set
to discoverable or visibility is ON.
Followsteps2through7fromthe
previous page. 1.
2.
4.
5.
Bluetooth
HandsFreeL ink
(Models with navigation system)
Phone pairing t ips
Features
525
NOTE:
10/07/17 10:44:58 31TK8600_530
2011 Odyssey

To delete a paired phone:
Select ‘‘Connection’’ f rom the
Phone Setup screen.
Select ‘‘Delete.’’
Select the phone you want to
delete. The Bluetooth icon shows
you the currently linked phone.
A trash icon appears next to the
selected phone. Select ‘‘OK’’ to
continue.
To create your own pass-key, select
‘‘Fixed’’ and f ollow steps 3 and 4.
Delete the current pass-key.
Enter a new pass-key, and select
‘‘OK.’’ Select ‘‘Yes’’ f rom the
conf irmation screen.
1.
2.
3.
4. 5.
3.
4.
Bluetooth
HandsFreeL ink
(Models with navigation system)
526
TRASH ICON
BLUETOOTH ICON
Example
Push the selector to left to delete.
10/07/17 10:45:07 31TK8600_531
2011 Odyssey

µ
Apply the parking brake.
In cold weather, turn of f all
electrical accessories to reduce
the drain on the battery.
Make sure the shif t lever is in
Park. Press on the brake pedal.
Your vehicle’s starter system has an
auto control mode. When you turn
the ignition switch to the START
(III) position, this f eature keeps the
engine’s starter motor running until
the engine starts. Follow these
instructions to start the engine:
Without touching the accelerator
pedal, turn the ignition switch to
the START (III) position, then
release the ignition switch. You do
not need to hold the ignition
switch in the START (III) position
to start the engine. The starter
motor runs until the engine starts
or a maximum of 10 25 seconds
depending on engine coolant
temperature.
If the engine does not start, wait at
least 10 seconds bef ore trying
again.
1.
2.
3. 4.
Starting the Engine
Driving
559
Immobilizer System
The engine is harder to start in cold
weather. Also, the thinner air f ound at
altitudes above 8,000 f eet (2,400
meters) adds to this problem. T he immobilizer system protects your
vehicle f rom thef t. If an improperly
coded key (or other device) is used, the
engine’s f uel system is disabled. See
on page .145
10/07/17 10:49:46 31TK8600_564
2011 Odyssey

µµ
µµ
µ
CONT INUED
If you have done all of the above and
still cannot move the lever out of
Park, seeon
page .
To avoid transmission damage, come
to a complete stop bef ore shif ting
into Park. You must also press the
release button to shift into Park. The
shif t lever must be in Park bef ore
you can remove the key f rom the
ignition switch. Use neutral if you
need to restart a stalled engine, or if
it is necessary to stop brief ly with
the engine idling. Shif t to the Park
position if you need to leave your
vehicle for any reason. Press on the
brake pedal when you are moving
the shift lever from neutral to
another gear. Use this position f or
normal driving. The transmission
automatically selects a suitable gear
f or your speed and acceleration.
This position mechani-
cally locks the transmission. Use
Park whenever you are turning of f or
starting the engine. To shif t out of
Park, you must press on the brake
pedal and have your f oot of f the
accelerator pedal. Press the release
buttononthefrontof theshiftlever
to move it. Press the brake
pedal and the release button on the
frontoftheshiftlevertoshiftfrom
Park to reverse. To shif t f rom
reverse to neutral, come to a
completestop,andthenshift.Press
the release button bef ore shif ting
into reverse f rom neutral. To use D3, press the
D3buttonwhentheshiftleverisin
the ‘‘D’’ position. This position is simi-
lartoD,exceptonlythefirstthree
gears are selected instead of all f ive.
Use D3 when towing a trailer in hilly
terrain, or to provide engine braking
when going down a steep hill. D3 can
also keep the transmission f rom
cycling between third and f ourth
gears in stop-and-go driving.
565
Except Touring models
Automatic Transmission
Shif t L ock Release Neutral (N) Drive (D)
Park (P) Reverse (R)
Drive (D3)
Driving
563
10/07/17 10:50:12 31TK8600_568
2011 Odyssey

This allows you to move the shif t
lever out of Park if the normal
method of pushing on the brake
pedal and pressing the release
button does not work.Remove the key from the ignition
switch. Set the parking brake.
Putaclothonthenotchof the
shif t lock release slot cover to
prevent scratches. Using a small
f lat-tip screwdriver or a metal
f ingernail f ile, caref ully pry on the
notch of the cover to remove it. Insert the key in the shift lock
release slot.
Push down on the key while you
pressthereleasebuttononthe
shif t lever and move the shif t lever
out of Park to neutral.
If you need to use the shif t lock
release, it means your vehicle is
developing a problem. Have it
checked by your dealer.Remove the key from the shift
lock release slot, then reinstall the
cover. Make sure the notch on the
cover is on the right side. Insert
the key into the ignition switch,
press the brake pedal, and restart
the engine.
5. 6.
4.
1.
2.
3.
Automatic Transmission
Shif t L ock Release
Driving
565
COVER RELEASE BUTTON
SHIFT LOCK RELEASE SLOT
10/07/17 10:50:26 31TK8600_570
2011 Odyssey

CONT INUED
Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustmentsshouldbedonebyyour
dealer or other qualif ied technician.Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
f rom contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
The low beam headlight bulbs are a
type of high voltage discharge tube.
High voltage can remain in the
circuit even with the light switch of f
and the key removed. Because of
this, you should not attempt to
examine or change a low beam
headlight bulb yourself . If a low
beam headlight bulb fails, take your
vehicle to a dealer to have it replaced.
On Touring Elite and Canadian Touring
models
Lights
Headlight A iming Replacing a Headlight Bulb
High Voltage Discharge Tube
Headlights
Maint enance
625
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
10/07/17 10:57:48 31TK8600_630
2011 Odyssey

If youfindnothingwrong,youwill
need a qualif ied technician to f ind
the problem. Seeon page .
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page ).
There may be an electrical
problem, such as no power to the
f uel pump. Check all the f uses
(see page ).
In this case, the starter motor’s
speed sounds normal, or even f aster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Do you have f uel? Check the f uel
gauge; the low f uel indicator may
not be working.
Are you using the proper starting
procedure? Ref er to
on page . 69
559 683
673 Emergency
Towing
T he Starter Operates Normally
Starting the
Engine
If theEngineWon’tStart664
10/07/17 11:03:06 31TK8600_669
2011 Odyssey

µµ
µ
µ
µµ
µ
µ
µ
Î
Î
Î Î
Î
Amps.
No. No. Amps.
Circuits Protected Circuits Protected7.5 A
7.5 A
7.5 A
7.5 A
7.5 A
7.5 A
20 A
20 A
15 A
7.5 A 20 A
7.5 A
7.5 A 20 A
20 A
20 A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
20 A
20 A
15 A
7.5 A
7.5 A
7.5 A
7.5 A
7.5 A
7.5 A
7.5 A
7.5 A
20 A
40 A
Door Lock Motor 1 (Lock)
Door Lock Motor 2 (Lock)
Driver’s Door Lock Motor
(Lock)
Door Lock Motor 1 (Unlock)
Door Lock Motor 2 (Unlock)
Driver’s Door Unlock
Door Lock Main
Not Used
Driver’s Side Power Slide
Door Closer
Rear Fuse Box
Meter
Primary Under-hood
Fuse Box
Accessory
STS
Driver’s Power Seat Sliding
Moonroof
Rear Left Power Window Driver’s Power Window
Fuel Pump
Passenger’s Side Fuse Box
VSA
ACG AS
STRLD
HAC
DRL
ACC Key Lock
Driver’s Power Seat
Lumbar Support
TPMS
Driver’s Power Seat Reclining
Driver’s Side Power
Slide Door Motor
: If equipped
Fuse Locations680INTERIOR FUSE BOX (Driver’s side)
10/07/17 11:04:59 31TK8600_685
2011 Odyssey