automatic HONDA ODYSSEY 2011 RB3-RB4 / 4.G Manual Online

Some state and local government
agencies prohibit the use of
headphones by the driver of a motor
vehicle. Always obey applicable laws
and regulations.The audio f or the rear entertainment
system is sent to the wireless
headphones that come with the
system. When using the headphones,
make sure you wear them correctly:
L (lef t) and R (right) are marked on
the sides of the frame. Wearing the
headphones backwards may affect
audio reception, limiting the sound
quality and range. To use the headphones, pivot the
earpieces outward. This turns them
on. To adjust the volume, turn the
dial on the bottom of the right
earpiece. When you remove the
headphones, the earpieces
automatically pivot inward, and the
headphones turn of f . When not in
use, store the headphones in the
pocket of either f ront seat.
CONT INUED
Wireless Headphones
Ultrawide Rear Entertainment System
Features
471
VOLUME DIAL
10/07/17 10:37:29 31TK8600_476
2011 Odyssey

The alarm will also be activated if a
passenger inside the locked vehicle
turns the ignition switch on.
The security system will not set if
the hood, tailgate, or any door is not
f ully closed. Bef ore you leave the
vehicle, make sure the doors,
tailgate, and hood are securely
closed.To see if the system is set
af ter you exit the vehicle, press the
LOCK button on the remote
transmitter within 5 seconds. If the
system is set, the horn will beep
once.
Do not attempt to alter this system
or add other devices to it.
The security system helps to protect
your vehicle and valuables f rom thef t.
The horn sounds and a combination
of headlights, parking lights, side
marker lights, and taillights f lash if
someone attempts to break into your
vehicleorremovetheradio.This
alarm continues f or 2 minutes, then
the system resets. To reset an
activated system before the 2
minutes have elapsed, unlock the
driver’s door with the key or the
remote transmitter.
The security system automatically
sets 15 seconds after you lock the
doors, hood, and the tailgate. For the
system to activate, you must lock the
doorsandthetailgatefromthe
outside with the key, driver’s lock
tab, door lock master switch, or
remote transmitter. The security
system indicator on the instrument
panel starts blinking immediately to
show you the system is setting itself .
Once the security system is set,
opening any door, the tailgate, or the
hood without using the key or the
remote transmitter, will cause it to
alarm. It also alarms if the audio unit
is removed f rom the dashboard or
the wiring is cut.
On all models except LX
Security System
Features
479
NOTE:
SECURITY SYSTEM INDICATOR
10/07/17 10:38:38 31TK8600_484
2011 Odyssey

CONT INUED
When you turn the system on, a
beeper sounds once.When the system senses an obstacle,
the appropriate indicator comes on,
and a beeper sounds as shown in the
f ollowing tables.
The parking sensor indicators are
automatically displayed on the audio
screen when an obstacle is detected.
Indicators and Beeper Operation
on the Multi-Inf ormation
Display/Instrument Panel/Audio
Screen
Parking Sensor System
Features
487
Multi-Information Display
Audio Screen
Instrument Panel
10/07/19 15:58:37 31TK8600_492
2011 Odyssey

Whenever you shif t to reverse (R)
with the ignition switch in the ON
(II) position, the rearview is shown
on the display.The camera display has parking
guidelines that indicate distance
f rom your vehicle.
The parking sensor indicators are
automatically displayed on the audio
screen when an obstacle is detected. 1st Line
2nd Line
3rd Line
4th Line
20 in (0.5 m)
39 in (1 m)
79 in (2 m)
118 in (3 m)
CONT INUED
On Canadian EX and EX-L without
navigation system
Canadian EX-L models
Rearview Camera and Monitor
Features
493
4th Line 3rd Line 2nd Line 1st Line
SCREEN DISPLAY
ACTUAL DISTANCE
10/07/17 10:40:30 31TK8600_498
2011 Odyssey

Bluetooth
HandsFreeL ink
(Models without navigation system)
500
Create a security code number for a paired phone.
Phone
Phone Setup Security Code
Auto Answer
Auto Transfer System Clear Set calls to automatically transfer from your phone to HFL when you enter the vehicle. Set incoming calls to be automatically answered.
Clear the system of all paired phones, phonebook entries, speed dials, and security codes.
10/07/17 10:41:17 31TK8600_505
2011 Odyssey

If you get into the vehicle while you
are on the phone, the call can be
automatically transferred to HFL
with the ignition switch in the
ACCESSORY (I) or ON (II) position.YoucanchoosewhentheHFL
system automatically answers
incoming calls.
This operation clears the security
codes, paired phones, all stored voice
tags, all speed dial entries, and all
imported phonebook data.
Select ‘‘Auto Transf er’’ f rom the
Phone Setup screen.
Push the selector knob to turn it
on or of f . The def ault setting is On. Select ‘‘System Clear’’ f rom the
Phone Setup screen.
Select ‘‘Yes’’ f rom the
conf irmation screen.
Select ‘‘Auto Answer’’ f rom the
Phone Setup screen.
Select ‘‘Of f ,’’ ‘‘2 seconds,’’ ‘‘5
seconds,’’ or ‘‘10 seconds.’’ The
def ault setting is Of f .
1.
2. 1.
2.
1.
2.
CONT INUED
A ut omat ic T ransf erring
A ut omat ic A nsweringT o clear t he syst em
Bluetooth
HandsFreeL ink
(Models without navigation system)
Features
507
10/07/17 10:42:22 31TK8600_512
2011 Odyssey

Î
Î Up to three category icons appear
next to the phonebook entries .
These indicate how many numbers
are stored f or the name. If a name
has more than three category icons,
‘‘…’’ is displayed.Availableonsomephones
When your phone is paired, the
contents of its phonebook and call
history are automatically imported to
HFL.
Up to 20 speed dial numbers can be
stored per phone.
The f irst six speed dials are linked to
the audio preset buttons while in the
Phone screen.
:
(available on some phones) Edit Speed Dial
A ut omat ic Import Cellular
Phonebook and Call Hist oryBluetooth
HandsFreeL ink
(Models without navigation system)
508
The first six speed dial entries
Home
Work
OtherVoice
Car
Preference
Mobile Fax
Message
Pager
10/07/17 10:42:31 31TK8600_513
2011 Odyssey

To delete a speed dial number:To make a call using a name in the
Phonebook:
Select ‘‘Edit Speed Dial’’ f rom the
Phone Setup screen.
Select ‘‘Delete Speed Dial.’’
Select the number you want to
delete. You can make calls by inputting any
phone number, using the imported
phonebook, using the call history, or
with speed dial entries, or by redial.
When your phone is paired, the
contents of its phonebook are
automatically imported to HFL.
Select ‘‘Phonebook’’ f rom the
Phone screen.
Select a name f rom the list.
2. 1.
3.
2. 1.
CONT INUED
Making a Call
Bluetooth
HandsFreeL ink
(Models without navigation system)
Features
511
10/07/17 10:43:04 31TK8600_516
2011 Odyssey

Push the selector knob to list the
number or numbers stored f or the
selected name.
Select a number and push the
selector knob to begin automatic
dialing.Select ‘‘Dial’’ f rom the Phone
screen.
Enter the phone number, and
select .Select ‘‘Call History’’ f rom the
Phone screen.
Call History is sorted by ‘‘All Calls,’’
‘‘Received Calls,’’ ‘‘Dialed Calls,’’
and ‘‘Missed Calls.’’ Selecting a
number begins automatic dialing.
Some phones do not support
‘‘All Calls.’’
1.
2.
3.
4.
1.
2.
To make a call using a phone number: To make a call using Call History:
Bluetooth
HandsFreeL ink
(Models without navigation system)
512
NOTE:
HISTORY LIST
10/07/17 10:43:13 31TK8600_517
2011 Odyssey

The f irst six speed dial entries are
linked to the audio preset buttons
while in the Phone screen. Press the
corresponding button to begin
automatic dialing.Select ‘‘Speed Dial’’ on the Phone
screen. Alistof upto20storedspeeddial
entries is shown. Select the entry
you want to call, and push
SELECT to begin automatic
dialing.
: Any voice-tagged speed dial
entry can be dialed by voice f rom
any screen. Select ‘‘Redial’’ f rom the Phone
screen or press and hold the PICK-
UP button to redial the last number
dialed in your phone’s history.
2.
1.To make a call using Speed Dial: To make a call using Redial:
Bluetooth
HandsFreeL ink
(Models without navigation system)
Features
513
NOTE
PRESET BUTTONS
10/07/17 10:43:20 31TK8600_518
2011 Odyssey