start stop button HONDA ODYSSEY 2020 (in English) User Guide
[x] Cancel search | Manufacturer: HONDA, Model Year: 2020, Model line: ODYSSEY, Model: HONDA ODYSSEY 2020Pages: 767, PDF Size: 43.89 MB
Page 166 of 767

uuOpening and Closing the Tailgate uOpening/Closing the Power Tailgate*
164
Controls
Press the power tailgate button for more than 
one second to operate when the power mode 
is in VEHICLE OFF.
u Some exterior lights flash and the beeper 
sounds.
If you press the button again while the power 
tailgate is moving, it will stop.
Press the button for more than one second, 
and the power tailgate will reverse direction.
■Customizing when to open the tailgate
Anytime:  The power tailgate unlocks and opens  at the same time. This is the 
default setting.
When Unlocked:  The tailgate opens when  all doors are unlocked.
2Customized Features  P. 448
■Using the Remote Transmitter1Opening/Closing the Power Tailgate*
If you close the power tail gate when all the doors are 
locked, the power tailgate locks automatically.
If you replace the battery or  the power tailgate fuse 
while the tailgate is open,  the power tailgate may be 
disabled. The power tail gate resumes once you 
manually close the tailgate.
Installing aftermarket com ponents other than Honda 
genuine accessories on  the power tailgate may 
prevent it from fully opening or closing.
Make sure the power tailgate is fully open before you 
get your luggage in and out.
Make sure the power tailgat e is fully closed before 
you start the vehicle.
The beeper sounds when you start driving while the 
power tailgate  is still open, or closing.
Power 
Tailgate 
Button
* Not available on all models
20 US ODYSSEY-31THR6210.book  164 ページ  2020年2月28日 金曜日 午前7時26分 
Page 176 of 767

174
uuOpening and Closing the Sliding Doors uOpening/Closing the Power Sliding Doors*
Controls
Opening/Closing the Power Sliding Doors*
The power sliding doors can be operated by pressing the power sliding door button 
on the remote, pressing the power sliding  door switches on the dashboard or door 
pillars, or using the door handle.
The power sliding doors  can be operated when:
• The sliding door main switch is in the  ON position.
• The power sliding door is unlocked.
• The fuel fill door is closed (on the driver side sliding door only).
• The power mode is in VEHICLE OFF or the re mote engine start mode is active with 
use of the remote.
• The transmission is in 
(P, the brake pedal is depressed, or the parking brake is 
applied (with the power mode in ON) when using the power sliding door switches 
on the dashboard.
1 Opening/Closing the Power Sliding Doors*
If the transmission is in  a position other than (P, and 
release the brake pedal  and the parking brake:
While opening – The sliding door stops and is left 
ajar.
While closing – The beeper sounds until the door 
closes.
Check that passengers, es pecially children, do not 
have their hands on the  sliding doors or on the door 
pillars before its  operation. If someone is caught in 
the opening or closing sliding door, it can cause 
serious injury.
Before replacing a rear tire, turn the power sliding 
door main switch to OFF.
Operate the power slidi ng doors only when the 
vehicle is at a complete stop. Make sure you apply the 
brake when rear passengers are boarding or exiting.
* Not available on all models
20 US ODYSSEY-31THR6210.book  174 ページ  2020年2月28日 金曜日 午前7時26分 
Page 183 of 767

181Continued
Controls
Security System
Immobilizer System
The immobilizer system prevents a key that has not been pre-registered from 
starting the engine. Each key  contains electronic transmitters that use electronic 
signals to verify the key.
Pay attention to the follo wing when pressing the ENGINE START/STOP button:
• Do not allow objects that emit  strong radio waves near the ENGINE START/
STOP  button.
• Make sure the key is not covered  by or touching a metal object.
• Do not bring a key from another vehicle’s immobilizer system near the  ENGINE 
START/STOP button.
• Do not put the key near magnetic items.  Electronic devices, such as televisions 
and audio systems emit strong magnetic  fields. Note that even a key chain can 
become magnetic.
Security System Alarm
The security system alarm activates when  the tailgate, hood, or doors are forcibly 
opened.
The alarm does not activate if the tailgate  or doors are opened with the key, remote 
transmitter or smart entry system
*.
However, the alarm activates if a door  is opened with the key, then the hood is 
opened before the power mode is set to ON.
■When the security system alarm activates
The horn sounds intermittently, and some exterior lights flash.
1 Immobilizer System
NOTICE
Leaving the key in the vehicl e can result in theft or 
accidental movement of the vehicle. 
Always take the key with you whenever you leave the 
vehicle unattended.
Do not alter the system or  add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.
Canadian models only: Apply and hold the brake 
pedal before turning the vehicle on the first time after 
the battery has been disconnected.
1 Security System Alarm
The security alarm continues for a maximum of two 
minutes until the security system deactivates.
* Not available on all models
20 US ODYSSEY-31THR6210.book  181 ページ  2020年2月28日 金曜日 午前7時26分 
Page 190 of 767

188
Controls
Operating the Switches Around the Steering Wheel
ENGINE START/STOP Button
*1:Canadian models
■Changing the Power Mode1ENGINE START/STOP Button
ENGINE START/STOP  Button Operating Range
You can start the engine wh en the remote is inside 
the vehicle.
The engine may also run if  the remote is close to the 
door or window, even if it is outside the vehicle.
ON mode:
The  ENGINE START/STOP  button is red when the 
engine is running.
If the battery of the remote is getting low, the engine 
may not start when you press the  ENGINE START/
STOP  button. If the engine do es not start, refer to 
the following link. 2 If the Remote Battery is Weak  P. 715
Operating RangeVEHICLE OFF (LOCK)
The button is off.
The steering wheel is locked
*1. 
The power to all electrical components is turned off.
ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories 
in this position.
ON
The button blinks (in red).
All electrical components can be used.
Press the button.
Without pressing the brake pedal
Change to 
(P.
U.S. models
Press the button without the 
gear position in (P.
Change to 
( P then press the 
button.
20 US ODYSSEY-31THR6210.book  188 ページ  2020年2月28日 金曜日 午前7時26分 
Page 191 of 767

Continued189
uuOperating the Switches Around the Steering Wheel uENGINE START/STOP Button
Controls
If you leave the vehicle for 30 to  60 minutes with the transmission in (P and the 
power mode in ACCESSORY, the vehicle automa tically goes into the mode similar to 
VEHICLE OFF (LOCK) to avoid draining the battery.
When in this mode:
The steering wheel does not lock. 
You cannot lock or unlock doors with th e remote transmitter or the smart entry 
system.
Press the  ENGINE START/STOP  button to switch the mode to VEHICLE OFF (LOCK).
■Automatic Power Off1ENGINE START/STOP Button
If the power mode does not  change from VEHICLE 
OFF to ACCESSORY, press the  ENGINE START/STOP 
button while moving the st eering wheel left and 
right. The steering wheel  will unlock, allowing the 
mode to change.
Do not leave the power mode in ACCESSORY or ON 
when you get out.
Canadian models
Canadian models
20 US ODYSSEY-31THR6210.book  189 ページ  2020年2月28日 金曜日 午前7時26分 
Page 192 of 767

uuOperating the Switches Around the Steering Wheel uENGINE START/STOP Button
190
Controls
If you open the driver’s doo r when the power mode is set to ACCESSORY, a warning 
beep sounds.
Warning buzzers may sound from inside and/
or outside the vehicle to remind you that the 
remote is out of the vehicle. If the buzzer 
continues even after the remote is put back 
inside, place it to be within its operational 
range.
■When the power mode is in ON
If the remote is taken out of the vehicle, and 
all the doors are closed, warning buzzers 
sound from both inside and outside the 
vehicle. A warning me ssage on the driver 
information interface notifies the driver inside 
that the remote is outside of the vehicle.
■When the power mode is in 
ACCESSORY
If the remote is taken out of the vehicle, and 
all the doors are clos ed, a warning buzzer 
sounds from outside the vehicle.
■Power Mode Reminder
■Remote Reminder1 Remote Reminder
When the remote is within the system’s operational 
range, and all the doors are closed, the warning 
function cancels.
If the remote is taken out  of the vehicle after the 
engine has been started, you can no longer change 
the  ENGINE START/STOP button mode or restart 
the engine. Always make sure if the remote is in your 
vehicle when you operate the  ENGINE START/STOP 
button.
Removing the remote fr om the vehicle through a 
window does not activate  the warning buzzer.
Do not put the remote on the dashboard or in the 
glove box. It may cause the warning buzzer to 
activate. Under some other conditions that can 
prevent the vehicle from locating the remote, the 
warning buzzer may also activate even if the remote 
is within the system’s operational range.
20 US ODYSSEY-31THR6210.book  190 ページ  2020年2月28日 金曜日 午前7時26分 
Page 253 of 767

251Continued
Controls
Climate Control System
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select. 
The system also selects the proper mix of heat ed or cooled air that raises or lowers 
the interior temperature to your pr eference as quickly as possible.
Use the system when the engine is running.
1. Press the  AUTO button.
2. Adjust the interior temperature us ing the temperature control switch.
3. Press the   button to cancel.
■Switching between the recirc ulation and fresh air modes
Press the   button and switch the mode depending on environmental 
conditions.
Recirculation Mode (indicator on): Recirculates air from the vehicle’s interior through 
the system.
Fresh Air Mode (indicator off): Maintains  outside ventilation. Keep the system in 
fresh air mode in normal situations.
Dual-zone climate control system
1 Using Automatic Climate Control
During idle-stops, air-conditioning is suspended, and 
only the blower remains ac tive. If you do not want 
air-conditioning suspended,  press Auto Idle Stop OFF 
button to cancel idle-stop.
If any buttons are presse d while using the climate 
control system in auto, the function of the button 
that was pressed will take priority.
The  AUTO  indicator will go off, but functions 
unrelated to the button th at was pressed will be 
controlled automatically.
To prevent cold air from bl owing in from outside, the 
fan may not start i mmediately when the  AUTO 
button is pressed.
If the interior is very warm, you can cool it down 
more rapidly by partial ly opening the windows, 
turning the system on auto, and setting the 
temperature to low. Change the fresh air mode to 
recirculation mode  until the temperature cools down.
When you set the temperat ure to the lower or upper 
limit,  Lo or  Hi is displayed.
Pressing the   button switches the climate 
control system between on and off. When turned on, 
the system returns to your last selection.
While ECON mode is active, the climate control 
system may have reduced  cooling performance.
Dashboard 
vents
Dashboard 
and floor 
vents
Floor vents
Floor and 
defroster 
vents
AUTO  Button
Temperature 
Control Switch A/C
 (Air Conditioning) Button
Fan Control 
Switch 
(Recirculation) 
Button
 (On/Off) 
Button
SYNC  
(Synchronized) 
Button
 (Windshield Defroster) Button
MODE Button
20 US ODYSSEY-31THR6210.book  251 ページ  2020年2月28日 金曜日 午前7時26分 
Page 254 of 767

uuClimate Control System uUsing Automatic Climate Control
252
Controls
Pressing the   button turns the air 
conditioner system on and automatically 
switches the system  to fresh air mode.
■To rapidly defrost the windows
1.Press the   button.
2. Press the   button.
■Defrosting the Windshield and Windows1Defrosting the Windshield and Windows
For your safety, make sure you have a clear view 
through all the windows before driving.
Do not set the temperatur e near the upper or lower 
limit.
When cold air hits the windshield, the outside of the 
windshield may fog up.
If the side windows fog up,  adjust the vents so that 
the air hits th e side windows.
If you press the   button dur ing Auto Idle Stop, the 
engine restarts automatically.
1 To rapidly defrost the windows
After defrosting the windows, switch over to fresh air 
mode.
If you keep the system in recirculation mode, the 
windows may fog up from humidity. This impedes 
visibility.
20 US ODYSSEY-31THR6210.book  252 ページ  2020年2月28日 金曜日 午前7時26分 
Page 258 of 767

256
Controls
Climate Control System
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select. 
The system also selects the proper mix of heated or cooled air that raises or lowers 
the interior temperature to your pr eference as quickly as possible.
Tri-zone climate control system
1Using Automatic Climate Control
Press the  FRONT CLIMATE  button to display A/C, 
MODE, fan control information on the audio/
information screen for several seconds. Select icon to 
turn on or off A/C, change  the vent mode, or change 
the fan speed.
During idle-stops, air-conditioning is suspended, and 
only the blower remains ac tive. If you do not want 
air-conditioning suspended,  press Auto Idle Stop OFF 
button to cancel idle-stop.
If any buttons are presse d while using the climate 
control system in auto, the function of the button 
that was pressed will take priority.
The  AUTO  indicator will go off, but functions 
unrelated to the button that  were pressed will be 
controlled automatically.
To prevent cold air from bl owing in from outside, the 
fan may not start i mmediately when the AUTO  
button is pressed.
If the interior is very warm, you can cool it down 
more rapidly by partial ly opening the windows, 
turning the system on AUTO, and setting the 
temperature to low. Change the fresh mode to 
recirculation mode  until the temperature cools down.
When you set the temperat ure to the lower or upper 
limit,  Lo or  Hi is displayed.
20 US ODYSSEY-31THR6210.book  256 ページ  2020年2月28日 金曜日 午前7時26分 
Page 260 of 767

uuClimate Control System uUsing Automatic Climate Control
258
Controls
■Switching between the recirculation and fresh air modes
Press the   button and switch the mode depending on environmental 
conditions.
Recirculation Mode (indicator on): Recirculates air from the vehicle’s interior through 
the system.
Fresh Air Mode (indicator off): Maintains  outside ventilation. Keep the system in 
fresh air mode in normal situations.
Pressing the   button turns the air 
conditioner system on and automatically 
switches the system to fresh air mode.
■To rapidly defrost the windows
1.Press the   button.
2. Press the   button.
■Defrosting the Windshield and Windows1Defrosting the Windshield and Windows
For your safety, make sure you have a clear view 
through all the windows before driving.
Do not set the temperatur e near the upper or lower 
limit.
When cold air hits the winds hield, the outside of the 
windshield may fog up.
If the side windows fog up,  adjust the vents so that 
the air hits th e side windows.
If you press the   button dur ing Auto Idle Stop, the 
engine restarts automatically.
1 To rapidly defrost the windows
After defrosting the windows, switch over to fresh air 
mode.
If you keep the system in recirculation mode, the 
windows may fog up from humidity. This impedes 
visibility.
20 US ODYSSEY-31THR6210.book  258 ページ  2020年2月28日 金曜日 午前7時26分