phone HONDA PILOT 2010 2.G User Guide

µ
µ
Bluetooth
handsf reelink.honda.
com
www.honda.ca,
HandsFreeLink(HFL)
allows you to place and receive
phone calls using voice commands,
without handling your cell phone.
Press and
release to give a command or answer
a call.
Press and
release to end a call, go back to the
previous command, or cancel the
command.
To use HFL, you need a Bluetooth-
compatible cell phone. For a list of
compatible phones, pairing
procedures, and special f eature
capabilities:
In the U.S., visit
or call (888) 528-7876.
In Canada, visitor call
(888) 9-HONDA-9.
CONT INUED
On models wit h navigat ion syst em
HFL Buttons
BluetoothHandsFreeL ink
Using HFL
HFL Talk button
HFL Back button
Features
361
HFL BACK BUTTON
NAVI VOICE CONTROLBUTTONS
HFL TALK BUTTON
——y



y
(/
yy
2010 Pilot

Try to reduce all background
noise. If the microphone picks up
voices other than yours,
commands may be misinterpreted.
Many commands can be spoken
together. For example, you can
say ‘‘Call 123-456-7890’’ or ‘‘Dial
Peter.’’
Press and release the HFL Talk
button each time you want to
make a command. Af ter the beep,
speak in a clear, natural tone.
When HFL is in use, navigation
voice commands cannot be
recognized.
To change the volume level of
HFL, use the audio system volume
knob or the steering wheel volume
controls.
Airorwindnoisefromthe
dashboard and side vents and
windows may interfere with the
microphone. Adjust or close them
as necessary.
BluetoothHandsFreeL ink
Voice Cont rol T ips
362
MICROPHONE
——y


y
(/
yy
2010 Pilot

CONT INUED
To hear general HFL inf ormation,
including help on pairing a phone
or setting up the system, say
‘‘Tutorial.’’
For help at any time, including a
list of available commands, say
‘‘Hands f ree help.’’
As an incoming call notif ication, you
will see the f ollowing display:
Some phones may send battery,
signal strength, and roaming status
inf ormation to HFL.
The Bluetooth icon will also
appear on the center display when a
phone is linked.
BluetoothHandsFreeL ink
Help FeaturesInf ormation Display
Features
363
PHONE DIALING
BATTERY LEVEL STATUS
SIGNAL STRENGTH
HFL MODE
ROAM STATUS
——y

y
(/
yy
2010 Pilot

ÌÌÌÌ
CONT INUED
BluetoothHandsFreeL ink
How to Use HFL
Features
365
‘‘Phone Setup’’
‘‘Call’’ or ‘‘Dial’’
‘‘Pair’’
‘‘Edit’’
‘‘Delete’’
‘‘Jim Smith’’
‘‘Set PairingCode’’
The ignition switch must be in the ACCESSORY (I) or ON (II) position.
‘‘List’’
‘‘Status’’
‘‘NextPhone’’
‘‘123-555- ’’
Press HFL Talk button
Press and release the HFL Talk button each time you give a command.
Pair a phone to the system (See page368)
Edit the name of a paired phone (See page369)
Deleteapairedphonefromthesystem(Seepage369)
Hearalistofallphonespairedtothesystem(Seepage369)
Hear which paired phone is currently linked to the system (Seepage370)
Search for another previously paired phone to link to (See page370)
Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number (Seepage370)
Enter desired phone number (See page371)
Once a phonebook entry is stored, you can say a name here.(Seepage371)
——y

y
(/
yy
2010 Pilot

BluetoothHandsFreeL ink
366
‘‘Redial’’
‘‘Transfer’’
‘‘Mute’’
‘‘Send’’
‘‘Phonebook’’
‘‘Store’’
‘‘Edit’’
‘‘Delete’’
‘‘ReceiveContact’’
‘‘List’’
Press HFL Talk button
Press and release the HFL Talk button each time you give a command.
Redialthelastnumbercalled(Seepage372)
TransferacallfromHFLtoyourphone,orfromyourphonetoHFL(Seepage374)
Muteyourvoicetothepersonattheotherendofthecall(Seepage374)
Sendnumbersornamesduringacall(Seepage374)
Storeaphonebookentry(Seepage375)
Editthenumberofanexistingphonebookentry(Seepage375)
Delete a phonebook entry (See page376)
If your phone supports this function, use this to transfer contacts from your phone to HFL (See page376)
Hearalistofallstoredphonebookentries(Seepage376)
——y


y
(/
y
y
2010 Pilot

ÃŽ
ÃŽ
CONT INUED
BluetoothHandsFreeL ink
Features
367
‘‘Change Language’’
‘‘Hands Free Help’’
‘‘SystemSet up’’
‘‘Tutorial’’
‘‘Clear’’
‘‘Auto Transfer’’
‘‘Call Notification’’
‘‘Security’’
‘‘Change Passcode’’
Press HFL Talk button
Press and release the HFL Talk button each time you give a command.
: Canadian models
Apply a security passcode to the system that must be input at each keycycletoaccessthesystem(Seepage381)
Changeyoursecuritypasscode(Seepage382)
Set how you would like to be notified of an incoming call(Seepage382)
Set calls to automatically transfer from your phone to HFL when youenterthevehicle(Seepage382)
Clear the system of all paired phones, phonebook entries and securitypasscode(Seepage383)
ChangelanguagefromEnglishtoFrench(Seepage384)
Hearatutorialforgeneralrulesonusingthesystem(Seepage363)
Hear a list of available commands and additional information describing each command (Seepage363)
——y

y
(/
yy
2010 Pilot

To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.
This command group is available f or
paired cell phones.
You cannot pair your phone while
the vehicle is moving.
Your phone must be in discovery
or search mode to pair. Ref er to
your phone’s manual.
Up to six phones can be paired.
Your phone’s battery may drain
f aster when it is paired to HFL.
If af ter three minutes your phone
is not ready to pair or a phone is
not f ound, the system will time out
andreturntoidle.
Press and release the HFL Talk
button. If you are pairing a phone
f or the f irst time, HFL will give
you inf ormation about the pairing
process. If it is not the f irst phone
you are pairing, say ‘‘
’’ and say ‘‘ .’’
Follow the HFL prompts and put
your phone in discovery or search
mode. HFL will give you a 4-digit
pairing code and begin searching
foryourphone.
When your phone f inds a
Bluetooth device, select HFL f rom
the options and enter the 4-digit
code f rom the previous step.
Follow the HFL prompts and
name the newly paired phone.
1.
2.
3.
4.
Phone Setup
Phone
setup Pair
Phone pairing tips
T o pair a cell phone:
BluetoothHandsFreeL ink
368
——y


y
(/
yy
2010 Pilot

Say ‘‘.’’
Say‘‘ ’’aftertheprompts.
If there is more than one phone
paired to the system, HFL will ask
you which phone’s name you want
to change. Follow the HFL
prompts and rename the phone.
Press and release the HFL Talk
button bef ore a command.
Press and release the HFL Talk
button bef ore a command.
Say ‘‘.’’
Say‘‘ ’’aftertheprompts.
HFL will ask you which phone you
want to delete. Follow the HFL
prompts to continue with the
deletion.
Press and release the HFL Talk
button bef ore a command.
HFL will read out all the paired
phone’s names.
Say‘‘ ’’aftertheprompts.
Say ‘‘.’’
1.
2.
3.3.
1.
2.
1.
2.
3.
CONT INUED
Phone setup
Edit
Phone setup
Delete
List
Phone setup
To hear the names of all paired
phones:
T o rename a paired phone:T o delet e a paired phone:
BluetoothHandsFreeL ink
Features
369
——y

y
(/
yy
2010 Pilot

Press and release the HFL Talk
button bef ore a command.
Say ‘‘.’’
Say‘‘ ’’aftertheprompts.
HFL will tell you which phone is
linked to the system.
Press and release the HFL Talk
button bef ore a command.
Say ‘‘.’’
Say ‘‘.’’
Press and release the HFL Talk
button bef ore a command.
Say ‘‘’’ af ter the
prompts.
HFL disconnects the linked phone
and searches for another paired
phone.
Once another phone is f ound, it is
linked to the system. HFL will
inf orm you which phone is now
linked.
If no other phones are f ound or
paired, HFL will inf orm you that the
original phone is linked again.
Say ‘‘’’ af ter the
prompts.
If you want HFL to create a
random code each time you pair a
phone, say ‘‘ .’’ If you want
to choose your own 4-digit code to
be used each time, say ‘‘ ’’
and f ollow the HFL prompts.
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
BluetoothHandsFreeL ink
T o hear which paired phone is
current ly linked:
To change f rom the currently linked
phone t o anot her paired phone:
T o change t he pairing code set t ing:
Phone setup
Status
Phone setup
Phone setup
Next phone
Set pairing code
Random
Fixed
370
——y

y
(/
yy
2010 Pilot

CONT INUED
You can make calls using any phone
number or a name in the HFL
phonebook. You can also redial the
last number called.
Press and release the HFL Talk
button bef ore a command.
Say ‘‘ ’’ or ‘‘ .’’
Follow the HFL prompts and say
the phone number you want to dial.
Follow the HFL prompts to
conf irm the number and say
‘‘ ’’ or ‘‘ .’’
Once connected, you will hear the
person you called through the audio
speakers.
Press and release the HFL Talk
button bef ore a command.
Follow the HFL prompts to
conf irm the name and make the
call.
Follow the HFL prompts and say
thenamestoredintheHFL
phonebook that you want to call.
Say ‘‘ ’’ or ‘‘ .’’
HFLusesaClass2Bluetooth,which
means, the maximum range between
yourphoneandvehicleis30feet(10
meters).
During a call, HFL allows you to talk
up to 30 minutes af ter you remove
the key from the ignition switch.
However, this may weaken the
vehicle’s battery.
1.
2.
3.
1.
2.
3.
BluetoothHandsFreeL ink
Making a Call
Call Dial
Call Dial
Call Dial
T o make a call using a phone
number:
Tomakeacallusinganameinthe
HFL phonebook:
Features
371
——y

y
(/
yy
2010 Pilot