maintenance schedule HONDA PRELUDE 1998 User Guide

Maintenance Schedule (Normal Conditions)
Follow the Normal Conditions
Maintenance Schedule if the
severe driving conditionsspecified in the Severe
Conditions Maintenance
Schedule do not apply.
NOTE: If you only OCCASIONALLY drive under a
"severe" condition, you should
follow the Normal Conditions Maintenance Schedule.
# : See maintenance and emissions warranty information, last column, page 163 .
MaintenanceProCarManuals.comMain Menu Table of Contents s t

Maintenance Schedule for Normal Conditions (listed by distance/time)
Maintenance
page 200).
Service at the indicated distance or time, whichever comes first. Do the\
items in A, B, C as required for each distance/time interval. Follow this
schedule if the severe driving conditions described in the Severe Conditions Schedule on the next page do not apply.
Canadian owners: Follow the schedule for Severe Conditions.
# : See maintenance and emissions warranty information, lastcolumn, page 163.
ProCarManuals.comMain Menu Table of Contents s t

Maintenance Schedule (Severe Conditions)

# : See maintenance and emissions warranty information, last column, page 163 . Follow the Severe Maintenance
Schedule if you drive your
vehicle MAINLY under one or
more of the following condi-

tions:

Driving less than 5 miles (8
km) per trip or, in freezing
temperatures, driving less than 10 miles (16 km) per trip. Driving in extremely hot
[over90°F (32°C)] conditions. Extensive idling or long
periods of stop-and-go driving.
Trailer towing, driving with a
roof rack carrier, or driving inmountainous conditions. Driving on muddy, dusty, or
de-iced roads.

* 1: Refer to page 196 for replacement

information under special driving
conditions.
For Canadian Owners

Follow the Maintenance
Schedule for Severe Conditions.

Maintenance
ProCarManuals.comMain Menu Table of Contents s t

Maintenance Schedule for Severe Conditions (listed by distance/time)

Use this schedule if your vehicle is MAINLY driven in any of the following Severe Conditions, or normally driven in Canada; otherwise use the Normal
Schedule. Service at the indicated distance or time, whichever comes first. Do the items in A, B, C as required for each distance/time.
Severe Conditions:

• Driving less than 5 mi (8 km) per trip or, in freezing temperatures, driving less than 10 mi (16 km) per trip.
• Driving in extremely hot (over 90°F/32°C) conditions.
• Extensive idling or long periods of stop-and-go driving.
• Trailer towing, driving with a roof rack carrier, or driving in mountainous conditions.
• Driving on muddy, dusty, or de-iced roads.

CONTINUED

Maintenance

#: See maintenance and emissions warranty information, last
column, page 163.
page 200).ProCarManuals.comMain Menu Table of Contents s t

Maintenance Schedule for Severe Conditions (listed by distance/time)
* 1 : See Timing Belt on page 196 to determine need for replacement.

MaintenanceProCarManuals.comMain Menu Table of Contents s t

Required Maintenance Record (for Normal and Severe Schedules)

You or the servcing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 164 ) or severe
conditions (page 166). Keep the receipts for all work done on your vehicle.

CONTINUED

MaintenanceProCarManuals.comMain Menu Table of Contents s t

Required Maintenance Record (for Normal and Severe Schedules)

MaintenanceProCarManuals.comMain Menu Table of Contents s t

Engine Oil

The oil container may also display the API Certification seal. Make sureit says "For Gasoline Engines." The SAE numbers tell you the oil's
viscosity or weight. Select the oil for
your vehicle according to this chart.

An oil with a viscosity of 5W-30 is
preferred for improved fuel economyand year-round protection in your

Honda. You may use a 10W-30 oil if

the temperature in your area never

goes below 20°F( — 7°C).
Synthetic Oil
You may use a synthetic motor oil if it meets the same requirements
given for conventional motor oil; energy conserving, a service
classification of SJ, and the proper
weight as shown on the chart. When using synthetic oil, you must follow
the oil and filter change intervals given in the maintenance schedule.
Additives Your Honda does not need any oil additives. Purchasing additives for
the engine or transmission will not
increase your vehicle's performance or longevity. It only increases the
cost of operating your vehicle.

Maintenance
API CERTIFICATION SEAL

Ambient TemperatureProCarManuals.comMain Menu Table of Contents s t

Engine Oil
Changing the Oil and Filter
Always change the oil and filter according to the time and distance (miles/kilometers) recommenda-
tions in the maintenance schedule.
The oil and filter collect contami- nants that can damage your engine if
they are not removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle should be raised on a service station-
type hydraulic lift for this service. Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled mechanic.
1. Run the engine until it reaches normal operating temperature,
then shut it off. 2. Open the hood and remove the
engine oil fill cap. Remove the oildrain bolt and washer from the
bottom of the engine. Drain the oil into an appropriate container. 3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your Honda dealer) is required to
remove the filter.

CONTINUED

Maintenance

OIL DRAIN BOLT
WASHER OIL FILTER

Type SHProCarManuals.comMain Menu Table of Contents s t

Cooling System

Do not add any rust inhibitors or
other additives to your vehicle's
cooling system. They may not be
compatible with the coolant or engine components.
Replacing Engine Coolant
The cooling system should be completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only useGenuine Honda antifreeze/coolant.
Draining the coolant requires access
to the underside of the vehicle. Unless you have the tools and
knowledge, you should have this maintenance done by a skilled
mechanic. 1. Slide the heater temperature
control lever to maximum heat.Open the hood. Make sure the
engine and radiator are cool to the
touch.
2. Remove the radiator cap. 3. Loosen the drain plug on the
bottom of the radiator. Thecoolant will come out through the
hole in the splash cover.

CONTINUED

Maintenance
DRAIN PLUG
Type SHProCarManuals.comMain Menu Table of Contents s t