ECU HONDA S2000 2002 1.G Owner's Manual

Put on the spare tire. Put the
wheel nuts back on f inger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is f irmly against
the hub. Do not try to tighten
them f ully.Lower the car to the ground and
remove the jack.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
f acility.
Tighten the wheel nuts to:
13.
11. 12.
Changing a Flat T ire
T aking Care of t he Unexpect ed
224 80 lbf·ft (108 N·m , 11 kgf·m)

Remove the tool box f rom the
trunk well and replace the jack,
wheel wrench and extension in the
tool box.
Place the tool box into the spare
tire shelf in the trunk.Replacethesparetirecover.
Secure it with the three clips. Push
each clip down securely, and pivot
theringdownflat.
Put the flat tire in the trunk well
vertically as shown.
14.
15. 17.
16.
Changing a Flat T ire
T aking Care of t he Unexpect ed
225

Screw the towing hook into the
extension and tighten it securely
by hand.
4.
If Your Car Gets Stuck
T aking Care of t he Unexpect ed
246
To avoid damage to your car, use the
towing hook f or straight, f lat ground
towing only. Do not tow at an angle.
The tow hook should not be used to tow
the vehicle onto a f lat bed. Do not use
it as a tie down.