key HUMMER H2 2007 User Guide

There are several ways to lock and unlock
your vehicle.
To unlock the door from the outside, use the
keyless entry system or the key.
To unlock or lock the
door from the inside,
slide the manual
lever forward or
rearward.Power Door Locks
The power door lock
switches are located on
the driver’s and front
passenger’s armrests.
Q(Lock):Remove the ignition key and press the
lock symbol to lock all of the doors.
If the delayed locking feature is on, the doors will
not lock until ve seconds after the last door is
closed. Press the lock symbol twice to override this
feature and lock all of the doors immediately.
SeeDelayed Locking on page 102for more
information.
K(Unlock):To unlock the doors, press the
unlock symbol.
101

Delayed Locking
When locking the doors with the power lock switch
or the keyless entry transmitter and a door or
the liftgate (if equipped) is open, the delayed
locking feature will delay locking the doors until
ve seconds after the last door is closed. You will
hear three chimes to signal that the delayed
locking feature is in use.
Pressing the power lock switch or the lock button
on the keyless entry transmitter twice will
override the delayed locking feature and
immediately lock all the doors.
You can turn the delayed locking feature off or
back on again by doing the following:
1. Press and hold the power door lock switch in
the lock position.
2. Press unlock twice on the remote keyless
entry transmitter.
This feature will not operate if the key is in the
ignition.
You can also program this feature using the DIC.
SeeDIC Vehicle Customization on page 234.
Programmable Automatic
Door Locks
Your vehicle is equipped with an automatic lock/
unlock feature which enables you to program your
vehicle’s power door locks. You can program this
feature through the Driver Information Center (DIC).
SeeDIC Vehicle Customization on page 234for
more information on DIC programming.
Rear Door Security Locks
With this feature, you can lock the rear doors so
they cannot be opened from the inside.
This feature is located
on the inside edge of
the rear doors.
102

To use the security locks, do the following:
1. Open one of the rear doors.
2. Turn the lock
counterclockwise
with your
ignition key.
3. Close the door.
4. Do the same to the other rear door.If you want to open the rear door while the
security lock is engaged, unlock and open the
door from the outside.
To disengage the child security lock feature, turn
the lock clockwise with your ignition key.
Lockout Protection
This feature protects you from locking your key in
the vehicle when the key is in the ignition and
a door is open.
If the power lock switch is pressed when a door is
open and the key is in the ignition, all of the doors
will lock and then the driver’s door will unlock.
103

Liftgate (SUV)
{CAUTION:
It can be dangerous to drive with
the liftgate open because carbon
monoxide (CO) gas can come into your
vehicle. You can not see or smell CO.
It can cause unconsciousness and even
death. If you must drive with the liftgate
open or if electrical wiring or other cable
connections must pass through the seal
between the body and the liftgate:
Make sure all other windows are shut.
Turn the fan on your heating or
cooling system to its highest speed
and select the control setting that will
force outside air into your vehicle.
SeeDual Automatic Climate Control
System on page 197.
If you have air outlets on or under the
instrument panel, open them all the
way. SeeEngine Exhaust on page 137.To lock and unlock the liftgate, use any of the
power door lock switches or the remote keyless
entry (RKE) transmitter.
To open the liftgate, do the following:
1. Move the spare tire carrier out of the way.
See “Opening the Spare Tire Carrier” under
Tailgate/Spare Tire Carrier on page 108.
2. Pull the handle located in the center of
the door.
To close the liftgate, do the following:
1. Pull the liftgate down until it latches.
2. Move the spare tire carrier back into place.
See “Closing the Spare Tire Carrier” under
Tailgate/Spare Tire Carrier on page 108.
104

3. Press either one of the two power Midgate®
latch release buttons. The Midgate®will move
slightly forward from its closed position.
The latch release buttons operate while the
ignition is in RUN, ACCESSORY, in RAP
mode, or up to ten minutes after removing
the key. If necessary, press the global
express-down button to reactivate the release
buttons for an additional ten minutes.4. Pull the Midgate
®inward and down to its fully
lowered position.
5. Flip the auxiliary panel on the top of the
Midgate
®into position to bridge the gap
created by the hinges in the Midgate®.
There are two nger holds on the panel.
Raising the Midgate®
To raise the Midgate®, do the following:
1. Fold the auxiliary panel back into the exterior
of the Midgate
®. The panel should snap loudly
back into position which means it is secure.
2. Reverse the steps for lowering the Midgate
®
listed previously. The Midgate®must be fully
latched on both sides before the window
can be raised.
3. Press the top part of the Midgate
®window
switch to express-up the window. To stop
the window, press the switch a second time.
107

Global Window Feature
The global window up
and express-down
buttons are located on
the driver’s door.
This feature allows all side windows and midgate
window, if equipped, to be opened or closed
at the same time.
q(Window Express-Down):Press the
express-down button to lower all side windows
and midgate window, if equipped, without stopping.
Express-down will operate while the ignition is in
RUN or ACCESSORY, or while Retained
Accessory Power (RAP) is active. SeeRetained
Accessory Power (RAP) on page 121.If the key is out of the ignition, express-down will
only activate while the driver’s door is open
and the content theft-deterrent system is disabled.
To stop the express-down, press the up button.
Pressing the global express-down button also
activates the power midgate latch release buttons,
if equipped. See “Lowering the Midgate” under
Midgate
®(SUT) on page 105.
n(Window Up):Press the up button to raise all
windows. The midgate window, if equipped,
will express-up while the side windows will go up
a small amount at a time. Press and hold the
up button to raise the four side windows all the
way. The up button operates while the ignition is in
RUN or ACCESSORY, or while RAP is active.
Midgate Window
If your vehicle has a midgate, the switch to
operate the window is located on the instrument
panel to the left of the steering wheel. See
Instrument Panel Overview on page 174.
113

Content Theft-Deterrent
Your vehicle is equipped with a content
theft-deterrent alarm system.
With this system, the
security light in the
instrument panel cluster
will ash as you open
the door if your
ignition is off.
This light reminds you to activate the
theft-deterrent system. Here is how to do it:
1. Open the door.
2. Lock the door with the power door lock switch
or the remote keyless entry transmitter. The
security light will illuminate to inform the driver
the system is arming. If a door is open when
the doors are locked, the security light
will ash.3. Close all doors. The security light should go
off after about 30 seconds. The alarm is not
armed until the security light goes off.
If the delayed locking feature is turned on,
the theft-deterrent system will not start
the arming process until the last door is
closed and the delay timer has expired.
SeeDelayed Locking on page 102.
If a locked door is opened without the key or
the remote keyless entry transmitter, the alarm will
go off. The headlamps and parking lamps will
ash for two minutes, and the horn will sound for
30 seconds, then will turn off to save the battery
power. You can choose different feedback options
for the alarm. SeeDIC Vehicle Customization
on page 234.
Remember, the theft-deterrent system will not
activate if you lock the doors with the vehicle’s key
or use the manual door lock. It activates only if
you use a power door lock switch with the
door open, or with the remote keyless entry
transmitter. You should also remember that you
can start your vehicle with the correct ignition key if
the alarm has been set off.
116

Here is how to avoid setting off the alarm
by accident:
If you do not want to activate the
theft-deterrent system, the vehicle should be
locked with the door keyafterthe doors
are closed.
Always unlock a door with a key, or use the
remote keyless entry transmitter. Unlocking
a door any other way will set off the alarm.
If you set off the alarm by accident, unlock any
door with the key. You can also turn off the alarm
by pressing unlock on the remote keyless entry
transmitter. The alarm will not stop if you try
to unlock a door any other way.
Testing the Alarm
The alarm can be tested by following these steps:
1. From inside the vehicle, lower the driver’s
window and open the driver’s door.
2. Activate the system by locking the doors with
the power door lock switch while the door is
open, or with the remote keyless entry
transmitter.
3. Get out of the vehicle, close the door and wait
for the security light to go out.
4. Then reach in through the window, unlock the
door with the manual door lock and open the
door. This should set off the alarm.
While the alarm is set, the power door unlock
switch is not operational.
If the alarm does not sound when it should but the
headlamps ash, check to see if the horn works.
The horn fuse may be blown. To replace the fuse,
seeInstrument Panel Fuse Block on page 504
andUnderhood Fuse Block on page 507.
If the alarm does not sound or the headlamps do
not ash, the vehicle should be serviced by
your dealer.
117

Passlock®
Your vehicle is equipped with the Passlock®
theft-deterrent system.
Passlock
®is a passive theft-deterrent system.
Passlock®enables fuel if the ignition lock cylinder
is turned with a valid key. If a correct key is not
used or the ignition lock cylinder is tampered with,
the fuel system is disabled and the vehicle will
not start.
During normal operation, the security light will turn
off approximately ve seconds after the key is
turned to RUN.
If the engine stalls and the security light ashes,
wait about 10 minutes until the light stops
ashing before trying to restart the engine.
Remember to release the key from START as
soon as the engine starts.If the engine does not start after three tries, the
vehicle needs service.
If the engine is running and the security light comes
on, you will be able to restart the engine if you turn
the engine off. However, your Passlock
®system is
not working properly and must be serviced by your
dealer. Your vehicle is not protected by Passlock
®
at this time. You may also want to check the fuse.
SeeInstrument Panel Fuse Block on page 504and
Underhood Fuse Block on page 507. See your
dealer for service.
In an emergency, call the Roadside Assistance
Center. SeeRoadside Assistance Program
on page 542.
118

Ignition Positions
Use the key to turn the ignition switch to
four different positions.
A (LOCK):This position locks the ignition and
transmission. It is a theft-deterrent feature. You will
only be able to remove the key when the ignition
is turned to LOCK.Notice:Using a tool to force the key from the
ignition switch could cause damage or break
the key. Use the correct key and turn the key
only with your hand. Make sure the key is all the
way in. If it is, turn the steering wheel left and
right while you turn the key hard. If none of this
works, then your vehicle needs service.
B (ACCESSORY):This position lets you use
things like the radio and the windshield wipers
when the engine is off.
Lengthy operation of features such as the radio in
the accessory ignition position and the RUN
position may drain the battery and prevent your
vehicle from starting. Do not operate your vehicle
in the accessory ignition position for a long
period of time.
C (RUN):This is the position for driving. It is the
position the switch returns to after the engine
starts, and you release the key.
The battery could be drained if you leave the key
in the ACCESSORY or RUN position with the
engine off. You may not be able to start your
vehicle if the battery is allowed to drain for
an extended period of time.
D (START):This position starts the engine.
120