bonnet Hyundai Coupe 2006 User Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2006, Model line: Coupe, Model: Hyundai Coupe 2006Pages: 483, PDF Size: 12.73 MB
Page 447 of 483

6OWNER MAINTENANCE
20
!
G200A01E
FUSIBLE LINKS
SG200A1-E The fusible link prevents damage to the wiring harness in the event of an electrical system malfunction. Failureof a fusiblelink is indicative of a seri- ous overload condition having oc- curred and therefore the electricalsystem should be checked by a Hyundai authorised repairer before a replacement link is fitted. WARNING:
Under no circumstances should a
fusible link be replaced with any-thing other than a new link of thesame rating. The use of higher rated links or other means of con- necting the circuit will create apotential fire hazard.
Melted SG200B2-E
Individual Circuit Fuses
The fuse box containing the individual
circuit fuses is located on the lowerportion of the dashboard adjacent to the bonnet release. The fuse box cover is removed by pushing lightlyand then releasing the lid. A fuse rating grid will be found on the re- verse side of the cover. In the eventof fuse failure, the fuse should be replaced with one of equivalent rat- ing. A fuse removal tool is providedwithin the fuse box to facilitate re- placement.
Good
HGK4003-E
gkfluk-6.p6512/26/2006, 5:25 PM
20
Page 451 of 483

6OWNER MAINTENANCE
24
G290B01GK-EAT
Adjustment After Headlight As- sembly Replacement
If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming screen asshown in the illustration. Turn on the headlight switch.
1. Adjust headlights so that main axis of light is parallel to centre line of the body and is aligned with point"P" shown in the illustration.
2. Dotted lines in the illustration show centre of headlights.
1. Keep all tyres inflated to the correct
pressure.
2. Place the vehicle on level ground and press the front bumper & rearbumper down several times. Placevehicle at a distance of 118.1 in. (3m) from the test wall.
3. See that the vehicle is unloaded (except for full levels of coolant, engine oil and fuel, and spare tyre,jack, and tools).
4. Clean the head lights lens and turn
on the headlight.
5. Open the bonnet.
6. Draw the vertical line (through the centre of each headlight beam pat- tern) and the horizontal line (through the centre of each headlight beampattern) on the aiming screen.And then, draw a parallel line at1.18 in. (30 mm) under the hori- zontal line.
7. Adjust each cut-off line of the low beam to the parallel line with aphillips screwdriver - VERTICAL AIMING.
8. Adjust each cut-off line of the low
beam to the each vertical line witha phillips screwdriver - HORIZON- TAL AIMING. L
G290B01JM-D
W
H
H Cut-off line"P"
Vertical lineHorizontal line
Ground line
1.18 in.
G290A02GK-EAT
HEADLIGHT AIMING ADJUSTMENT
Before performing aiming adjustment, make sure of the following.
OGK076068N
OGK076067N
Horizontal aiming
Vertical aiming
gkfluk-6.p65 12/26/2006, 5:25 PM
24
Page 452 of 483

6
OWNER MAINTENANCE
25
SPECIFICATION: "H" Horizontal centre line of headlights from ground: Low Beam: 27.2 in. (690 mm) High Beam: 26.5 in. (674 mm) "W" Distance between each headlight cen- tre : Low Beam: 52.6 in. (1,336 mm) High Beam: 43.2 in. (1,098 mm) "L" Distance between the headlights and the wall that the lights are tested against : 118.11 in. (3,000 mm)REPLACING LIGHT BULBS
G260A01MC-EAT In the event of bulb failure being expe-
rienced, ensure that the relative light- ing circuit is turned off prior to attempt-ing to replace the bulb. The illustra- tions on the following page will assist in locating and removing the various
bulbs. Ensure that the replacement bulb has the same cap configuration and wattage as the original.
See page 6-33 for the wattage descrip-
tions.
CAUTION:
o Keep the lamps out of contact with petroleum products, such as oil, petrol, etc.
o If you don't have necessary tools, the correct bulbs and the exper- tise, consult your Hyundaiauthorised repairer.
!
G270A01GK-EAT
Headlight and Front Turn Signal Light
1. Allow the bulb to cool. Wear eye
protection.
2. Open the engine bonnet.
3. Always grasp the bulb by its plastic base, avoid touching the glass.
4. Disconnect the power cord from the
bulb base in the back of the head- light. OGK076066N
gkfluk-6.p65
12/26/2006, 5:25 PM
25
Page 480 of 483

10INDEX
2
A Airbag ......................................................................... 1-32
Air Cleaner Filter ......................................................... 6-11
Air Conditioning
Care ......................................................................... 6-18
Operation ....................................................... 1-89, 6-18
Switch ...................................................................... 1-88
Antenna ...................................................................... 1-99
Ashtray ....................................................................... 1-60
Audio Remote Control Switch ..................................... 1-79
B Battery ........................................................................ 6-21
Bonnet Release .......................................................... 1-70
Brake Anti-lock system ...................................................... 2-14
Checking the brakes ................................................ 6-16
Effective braking ...................................................... 2-16
Fluid ......................................................................... 6-16
C
Care of Cassette Tapes ........................................... 1-104
Care of D iscs ........................................................... 1-103
Catalytic Converter ...................................................... 7-3
Child Restraint System ............................................... 1-23
Cigar Lighter ............................................................... 1-60
Climate Control Air Filter .................................. 1-99, 6-18
Clock .......................................................................... 1-59
Clutch Checking fluid .......................................................... 6-17Combination Light
Auto light ................................................................. 1-54
High-beam switch .................................................... 1-54
Headlight flasher ...................................................... 1-55
Lighting switch ......................................................... 1-53
Lane change si gnal .................................................. 1-53
Turn signal operation ............................................... 1-53
Cooling Fans ............................................................... 6-23
Corrosion Protection Cleaning the interior .................................................. 4-5
Protecting your Hyundai from corrosion ................... 4-2
Valeting ..................................................................... 4-3
Cruise Control ............................................................. 1-76
DDaily Operating Checks ............................................... 6-5
Defrosting/Defogging ................................................... 1-87
Door Central door lock ...................................................... 1-7
Door locks ................................................................ 1-6
Locking and unlocking front doors with a key .......... 1-6
Drink Holder ................................................................ 1-61
Driving
Economical driving .................................................. 2-17
Smooth corneri ng ..................................................... 2-18
Winter motoring ....................................................... 2-19
EElectronic Stability Program (ESP) ............................2-15
Emission Control Systems .......................................... 7-2
gkfluk-10.p65 12/26/2006, 5:10 PM
2