radio Hyundai Creta 2016 Owner's Guide

4-31
Multimedia System
Searching Radio Frequencies
Using Seek
Press the key to play the
previous/next frequency.
Using TUNE
Turn the TUNE knob to select the
desired frequency.
Using Radio Mode
Selecting Presets/Saving Presets
Press the button to display
the broadcast information for the fre-
quency saved to each preset button.
Press the ~ buttons to play the desired preset.Information
While listening to a frequency you
want to save as a preset, press and
hold one of the ~ preset but-
tons (over 0.8 seconds) to save the cur-
rent frequency to the selected preset.
Auto Store
Press the button to automati-
cally save receivable frequencies to
Preset buttons.
Information
While Auto Store is operating, press-
ing the [Cancel] button again will can-
cel Auto Store and restore the previ-
ous frequency.
Scan
Press the key to preview fre-quencies
with superior reception for 5 seconds each.
Press and hold the key (over
0.8 seconds) to preview presets for 5seconds each.
Once scan is complete, the previousfrequency will be restored.
While Scan is operating, pressing
the key will cancel the scan
operation.
SCAN
SCAN
SCAN
i
A.Store
P 6P 1
i
P6P1
PresetSEEK
TRACK
4

4-70
Multimedia System
SSEE TT UU PP ((FF oorr RR DD SS MM ooddeell))
Starting Mode
Press the key to display the Setup screen.
You can select and control options
related to [Display], [Sound], [Phone]and [System].
Display Settings
Adjusting the Brightness
Press the key Select
[Display] Select [Brightness]
Use the , buttons to adjust the
screen brightness or set the
Brightness on Automatic, Day, or
Night mode.
Press the button to reset.
1) Automatic : Adjusts the brightness
automatically
2) Day : Always maintains the bright- ness on high
3) Night : Always maintains the
brightness on low
Pop-up Mode
Press the key Select
[Display] Select [Pop-up Mode]
This feature is used to display the
Pop-up Mode screen when entering
radio and media modes.
When this feature is turned on,
pressing the or key
will display the Pop-up Mode screen.
Information
The media Pop-up Mode screen can
be displayed only when two or more
media modes have been connected.
i
MEDIA FM/AM
SETUP
Default
SETUP
SETUP

4-77
Multimedia System
4
Mode Pop up
Press the key Select
[Display] Select [Mode Pop up]
This feature is used to display the
Mode Pop up screen when entering
radio and media modes.
When this feature is turned on,
pressing the or key
will display the Mode Pop up screen.Information
The media Mode Pop up screen can be
displayed only when two or more
media modes have been connected.
Text Scroll (If equipped)
Press the key Select
[Display] Select [Text Scroll]
This feature is used to scroll text dis-
played on the screen when it is too
long to be displayed at once.
When turned on, the text is repeat-
edly scrolled. When turned off, the
text is scrolled just once.
Media Display
Press the key Select
[Display] Select [Media Display]
This feature is used to change the
information displayed within USB
and MP3 CD modes.
1) Folder File : Displays file name and folder name
2) Album Artist Song : Displays album name/artist name/songSETUP SETUP
i
MEDIA FM/AM
SETUP

4-83
Multimedia System
4
SSYY SSTT EEMM CC OO NNTTRR OO LLLL EE RR SS AA NN DD
F
F UU NNCCTT IIOO NNSS
Audio Head Unit
1. • Ejects the disc.
2.
Changes to FM/AM mode.
Each time the key is pressed,the mode is changed in order of FM ➟
FM2 ➟AM
3.
Changes to CD, USB(iPod), AUX mode.
Each time the key is pressed, the mode is changed in order of CD,
USB(iPod), AUX.
4. POWER/VOL knob
Turns the audio system on/off when the ignition switch is on ACC or ON.
If the knob is turned clockwise/ counterclockwise, the volume will
increase/decrease. 5.
When pressed shortly
- Radio mode : plays previous/next
frequency.
- Media (CD/USB/iPod ®
/My Music)
modes : changes the track, Song(file)
When pressed and held
- Radio mode : continuously changes
the frequency. Upon release, plays
the current frequency.
- Media(CD/USB/iPod7 pt/My Music) modes : rewinds or fast forwards the
track or file
- During a Handsfree call, controls the call volume.SEEK
TRACK
MEDIA
FM/AM
EJECT

4-84
Multimedia System
6. •Each time the key is shortly
pressed, sets Screen Off ➟Screen
On ➟Screen Off.
❈ Audio operation is maintained and
only the screen will be turned Off.
In the Screen Off state, press any
key to turn the Screen On again. 7.
Radio Mode
- Press the key (under 0.8 seconds)
: Previews each broadcast for 5 seconds each.
- Press and hold the key (over 0.8 seconds) : Previews the broad-
casts saved in Preset
~ for 5 seconds each.
❈ Press the key again to con-
tinue listening to the currentlyselected channel.
USB, iPod mode
- Press the key (under 0.8 seconds) : Previews each song
(file) for 10 seconds each
❈ Press the key again to
continue listening to the currentsong (file).
8.
Display details about the current mode. 9. TUNE knob
Radio mode : turn to change
broadcast frequencies.
Media (CD/USB/iPod ®
/My Music)
modes : turn to search tracks/
channels/files.
9. SETUP PUSH/ENTER
AUDIO
Select the item to change the BASS,
TREBLE, FADER and BALANCE
tune mode.
Press the SETUP PUSH/ENTERknob to select each mode and rotate
the SETUP PUSH/ENTER knob
clockwise or counter clockwise.
BASS Control
To increase the BASS, rotate the
knob clockwise, while to decrease
the BASS, rotate the SETUP
PUSH/ENTER knob clockwise or
counter clockwise.
TREBLE Control
To increase the TREBLE, rotate the
knob clockwise, while to decrease
the TREBLE, rotate the SETUP
PUSH/ENTER knob clockwise or
counter clockwise.
INFO
AST
SCAN
AST
SCAN
AST
SCAN6
1
AST
SCAN
DISP

4-89
Multimedia System
4
In using usb device
•To use an external USB device,
make sure the device is not
connected when starting up
the vehicle. Connect the device
after starting up.
•If you start the engine when
the USB device is connected, it
may damage the USB device.
(USB flashdrives are very sen-
sitive to electric shock.)
•If the engine is started up or
turned off while the external
USB device is connected, the
external USB device may not
work.
•It may not play inauthentic
MP3 or WMA files.
1) It can only play MP3 files with the compression rate between8Kbps~320Kbps.
2) It can only play WMA music files with the compression ratebetween 8Kbps~320Kbps.
(Continued)
CAUTION(Continued)
•Take precautions for static electricity when connecting or
disconnecting the external
USB device.
•An encrypted MP3 PLAYER is
not recognizable.
•Depending on the condition of
the external USB device, the
connected external USB
device can be unrecognizable.
•When the formatted byte/sec- tor setting of External USB
device is not either 512BYTE
or 2048BYTE, then the device
will not be recognized.
•Use only a USB device format-
ted to FAT 12/16/32.
•USB devices without USB I/F
authentication may not be
recognizable.
•Make sure the USB connec- tion terminal does not come in
contact with the human bodyor other objects.
(Continued)
(Continued)
•If you repeatedly connect or
disconnect the USB device in
a short period of time, it may
break the device.
•You may hear a strange noise when connecting or discon-
necting a USB device.
•If you disconnect the external
USB device during playback in
USB mode, the external USB
device can be damaged or may
malfunction. Therefore, discon-
nect the external USB devicewhen the audio is turned off or
in another mode. (e.g, Radio orCD)
•Depending on the type and
capacity of the external USB
device or the type of the files
stored in the device, there is a
difference in the time taken
for recognition of the device.
•Do not use the USB device for
purposes other than playing
music files.(Continued)

To prevent damage to your vehicle:
•Only use a 12volt power supply
(battery or jumper system) to jump
start your vehicle.
•Do not attempt to jump start your
vehicle by pushstarting.
Information
An inappropriately disposed battery can be harmful to the
environment and human
health. Dispose the battery
according to your local law(s)
or regulation.
Jump starting procedure
1. Position the vehicles close enough that the jumper cables will reach,
but do not allow the vehicles totouch.
2. Avoid fans or any moving parts in the engine compartment at all
times, even when the vehicles are
turned off.
3. Turn off all electrical devices such as radios, lights, air conditioning,
etc. Put the vehicles in P (Park, for
automatic transaxle vehicle) or
neutral (for manual transaxle vehi
cle), and set the parking brakes.
Turn both vehicles OFF.
i
NOTICE
6-6
What to do in an emergency
Pb
(Continued)
•NEVER attempt to recharge the
battery when the vehicle’s bat
tery cables are connected to the
battery.
•The electrical ignition system
works with high voltage. NEVER
touch these components with
the engine running or when the
ignition switch is in the ON posi
tion.
•Do not allow the (+) and ()
jumper cables to touch. It may
cause sparks.
•The battery may rupture or
explode when you jump start
with a low or frozen battery.
•Never attempt jump start if you
observe cracks, leaks or other
damage on Battery.

6-12
What to do in an emergency
TPMS (Tire Pressure
Monitoring System)
malfunction indicator
The TPMS malfunction indicator will
illuminate after it blinks for approxi
mately one minute when there is a
problem with the Tire Pressure
Monitoring System. If the system is
able to correctly detect an under infla
tion warning at the same time as sys
tem failure then it will illuminate theTPMS malfunction indicator.
We recommend that the system be
checked by an authorized HYUNDAI
dealer.
Low pressure damage
Significantly low tire pressure
makes the vehicle unstable and
can contribute to loss of vehicle
control and increased braking dis
tances.
Continued driving on low pressure
tires can cause the tires to over
heat and fail.
WARNING
•The TPMS malfunction indicator
may be illuminated if the vehicle
is moving around electric power
supply cables or radios transmit
ter such as at police stations,
government and public offices,
broadcasting stations, military
installations, airports, or trans
mitting towers, etc. This can
interfere with normal operation
of the Tire Pressure Monitoring
System (TPMS).
•The TPMS malfunction indicator
may illuminate if snow chains or
some separately purchased
devices such as notebook com
puters, mobile charger, remote
starter, navigation etc. are used
in the vehicle. This can interfere
with normal operation of the Tire
Pressure Monitoring System
(TPMS).
CAUTION