ignition Hyundai Elantra 2003 User Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2003, Model line: Elantra, Model: Hyundai Elantra 2003Pages: 172, PDF Size: 2.82 MB
Page 32 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 23 The airbag modules are located both in the
center of the steering wheel and in the front
passenger's panel above the glove box. When
the SRSCM detects a considerable impact to
the front of the vehicle, it will automatically
deploy the airbags.
Passenger's Airbag
Upon deployment, tear seams molded directly
into the pad covers will separate under pres-
sure from the expansion of the airbags. Further
opening of the covers then allows full inflation
of the airbags.
A fully inflated airbag in combination with a
properly worn seat belt slows the driver's or the
passenger's forward motion, thus reducing the
risk of head or chest injury.
B240B04E
The SRS service reminder indicator (SRI) on
the instrument panel will blink for about 6 sec-
onds after the ignition key is turned to the "ON"
position or after the engine is started, after
which the SRI should go out.
Passenger's Airbag
YR10353A
After complete inflation, the airbag immediately
starts deflating, enabling the driver to maintain
forward visibility.
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:When installing a container of liquid air When installing a container of liquid airWhen installing a container of liquid air When installing a container of liquid air
When installing a container of liquid air
freshener inside a vehicle, do not place it freshener inside a vehicle, do not place itfreshener inside a vehicle, do not place it freshener inside a vehicle, do not place it
freshener inside a vehicle, do not place it
near the instrument cluster nor on the in- near the instrument cluster nor on the in-near the instrument cluster nor on the in- near the instrument cluster nor on the in-
near the instrument cluster nor on the in-
strument panel pad surface. If there is any strument panel pad surface. If there is anystrument panel pad surface. If there is any strument panel pad surface. If there is any
strument panel pad surface. If there is any
leakage from the air freshener onto these leakage from the air freshener onto theseleakage from the air freshener onto these leakage from the air freshener onto these
leakage from the air freshener onto these
areas (Instrument cluster, instrument panel areas (Instrument cluster, instrument panelareas (Instrument cluster, instrument panel areas (Instrument cluster, instrument panel
areas (Instrument cluster, instrument panel
pad or air ventilator), it may damage these pad or air ventilator), it may damage thesepad or air ventilator), it may damage these pad or air ventilator), it may damage these
pad or air ventilator), it may damage these
parts. If the liquid from the air freshener parts. If the liquid from the air freshenerparts. If the liquid from the air freshener parts. If the liquid from the air freshener
parts. If the liquid from the air freshener
does leak onto these areas, wash them with does leak onto these areas, wash them withdoes leak onto these areas, wash them with does leak onto these areas, wash them with
does leak onto these areas, wash them with
water immediately. water immediately.water immediately. water immediately.
water immediately.
SSA1110C
SSA1110D
Page 33 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 24
B990B03Y-GATSide Impact Airbag (If Installed)
B990B02Y
Your Hyundai is equipped with a side impact
airbag in each front seat. The purpose of the
airbag is to provide the vehicle's driver and/or
the front passenger with additional protection
than that offered by the seat belt alone. The
side impact airbags are designed to deploy only
during certain side impact collisions, depend-
ing on the crash severity, angle, speed and
point of impact. The side impact airbag are not
designed to deploy in all side impact situations.
WARNING: WARNING:WARNING: WARNING:
WARNING:o oo o
o
When the SRS is activated, there may be When the SRS is activated, there may beWhen the SRS is activated, there may be When the SRS is activated, there may be
When the SRS is activated, there may be
a loud noise and fine dust will be re- a loud noise and fine dust will be re-a loud noise and fine dust will be re- a loud noise and fine dust will be re-
a loud noise and fine dust will be re-
leased throughout the vehicle. These con- leased throughout the vehicle. These con-leased throughout the vehicle. These con- leased throughout the vehicle. These con-
leased throughout the vehicle. These con-
ditions are normal and are not hazard- ditions are normal and are not hazard-ditions are normal and are not hazard- ditions are normal and are not hazard-
ditions are normal and are not hazard-
ous. However, the fine dust generated ous. However, the fine dust generatedous. However, the fine dust generated ous. However, the fine dust generated
ous. However, the fine dust generated
during airbag deployment may cause during airbag deployment may causeduring airbag deployment may cause during airbag deployment may cause
during airbag deployment may cause
skin irritation. Wash your hands and skin irritation. Wash your hands andskin irritation. Wash your hands and skin irritation. Wash your hands and
skin irritation. Wash your hands and
face thoroughly with lukewarm water face thoroughly with lukewarm waterface thoroughly with lukewarm water face thoroughly with lukewarm water
face thoroughly with lukewarm water
and a mild soap after an accident in and a mild soap after an accident inand a mild soap after an accident in and a mild soap after an accident in
and a mild soap after an accident in
which the airbags were deployed. which the airbags were deployed.which the airbags were deployed. which the airbags were deployed.
which the airbags were deployed.
o oo o
o
The SRS can function only when the The SRS can function only when theThe SRS can function only when the The SRS can function only when the
The SRS can function only when the
ignition key is in the "ON" position. If the ignition key is in the "ON" position. If theignition key is in the "ON" position. If the ignition key is in the "ON" position. If the
ignition key is in the "ON" position. If the
SRS SRI does not come on, or continu- SRS SRI does not come on, or continu-SRS SRI does not come on, or continu- SRS SRI does not come on, or continu-
SRS SRI does not come on, or continu-
ously remains on, after flashing for about ously remains on, after flashing for aboutously remains on, after flashing for about ously remains on, after flashing for about
ously remains on, after flashing for about
6 seconds when the ignition key is turned 6 seconds when the ignition key is turned6 seconds when the ignition key is turned 6 seconds when the ignition key is turned
6 seconds when the ignition key is turned
to the "ON" position, or after the engine to the "ON" position, or after the engineto the "ON" position, or after the engine to the "ON" position, or after the engine
to the "ON" position, or after the engine
is started, comes on while driving, the is started, comes on while driving, theis started, comes on while driving, the is started, comes on while driving, the
is started, comes on while driving, the
SRS is not working properly. If this oc- SRS is not working properly. If this oc-SRS is not working properly. If this oc- SRS is not working properly. If this oc-
SRS is not working properly. If this oc-
curs, have your vehicle immediately in- curs, have your vehicle immediately in-curs, have your vehicle immediately in- curs, have your vehicle immediately in-
curs, have your vehicle immediately in-
spected by your Hyundai dealer. spected by your Hyundai dealer.spected by your Hyundai dealer. spected by your Hyundai dealer.
spected by your Hyundai dealer.
o oo o
o
Before you replace a fuse or disconnect Before you replace a fuse or disconnectBefore you replace a fuse or disconnect Before you replace a fuse or disconnect
Before you replace a fuse or disconnect
a battery terminal, turn the ignition key to a battery terminal, turn the ignition key toa battery terminal, turn the ignition key to a battery terminal, turn the ignition key to
a battery terminal, turn the ignition key to
the "LOCK" position or remove the the "LOCK" position or remove thethe "LOCK" position or remove the the "LOCK" position or remove the
the "LOCK" position or remove the
ignition key. Never remove or replace ignition key. Never remove or replaceignition key. Never remove or replace ignition key. Never remove or replace
ignition key. Never remove or replace
the air bag related fuse(s) when the the air bag related fuse(s) when thethe air bag related fuse(s) when the the air bag related fuse(s) when the
the air bag related fuse(s) when the
ignition key is in the "ON" position. ignition key is in the "ON" position.ignition key is in the "ON" position. ignition key is in the "ON" position.
ignition key is in the "ON" position.
Failure to heed this warning will cause Failure to heed this warning will causeFailure to heed this warning will cause Failure to heed this warning will cause
Failure to heed this warning will cause
the SRS SRI to illuminate. the SRS SRI to illuminate.the SRS SRI to illuminate. the SRS SRI to illuminate.
the SRS SRI to illuminate.
B990A04Y-AATPASSENGER PRESENCE DETECTIONThe passenger presence detection system de-
tects the presence of a passenger in the right
front seat. If no passenger is recognized on the
front passenger seat, the deployment of the
front passenger and/or side airbag and seat
belt pretensioner will be prevented.
This system is designed to prevent the replace-
ment of airbag components that deploy need-
lessly in an accident.
NOTE:Luggage or other cargo heavier than 33 lbs
should not be placed on the passenger front
seat. This can allow the deployment of the
front passenger and/or side air bag in the
case of an accident.
WARNING:The Passenger Presence Detection system
is not intended to prevent airbag deploy-
ment while a child is in the front passenger's
seat. It is intended only as a means to
reduce unnecessary collision damage re-
pair expense by preventing airbag and seat
belt pretensioner deployment when the right
front passenger seat is unoccupied. De-
ployment is still possible if only a few pounds
are placed upon the seat. Therefore, children
must not be transported in the front seat. All
children must be seated in the rear seat and
properly restrained with the vehicle's re-
straint system or a child restraint system
appropriate for the child's size and weight.
Page 34 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 25
B990B01ESide airbag
sensor
WARNING:o For best protection from the side impact
airbag system and to avoid being injured
by the deploying side impact airbag, both
front seat occupants should sit in an
upright position with the seat belt prop-
erly fastened. The driver's hands should
be placed on the steering wheel at the
9:00 and 3:00 o'clock positions. The
passenger's arms and hands should be
placed in their laps.
o Do not use any accessory seat covers.
o Use of seat covers could reduce or pre-
vent the effectiveness of the system.
o Do not install any accessories on the
side or near the side impact airbag.
o Do not use excessive force on the side of
the seat.
o Do not place any objects over the airbag
or between the airbag and yourself.o Do not place any objects (an umbrella,
bag, etc.) between the front door and the
front seat. Such objects may become
dangerous projectiles and cause injury if
the supplemental side impact air bag
inflates.
o To prevent unexpected deployment of
the side impact air bag that may result in
personal injury, avoid impact to the side
airbag sensor when the ignition key is
on.B240C02A-AAT
SRS Care SRS CareSRS Care SRS Care
SRS Careo The SRS is virtually maintenance free and
there are no parts you can safely service by
yourself. The entire SRS system must be
inspected by an authorized Hyundai dealer
10 years after the date that the vehicle was
manufactured.
o Any work on the SRS system, such as re-
moving, installing, repairing, or any work on
the steering wheel must be performed by a
qualified Hyundai technician. Improper han-
dling of the airbag system may result in
serious personal injury.
WARNING: WARNING:WARNING: WARNING:
WARNING:o oo o
o
Do not install a child restraint system in Do not install a child restraint system inDo not install a child restraint system in Do not install a child restraint system in
Do not install a child restraint system in
the front passenger seat position. the front passenger seat position.the front passenger seat position. the front passenger seat position.
the front passenger seat position.
A child restraint system must never be A child restraint system must never beA child restraint system must never be A child restraint system must never be
A child restraint system must never be
placed in the front seat. The infant or child placed in the front seat. The infant or childplaced in the front seat. The infant or child placed in the front seat. The infant or child
placed in the front seat. The infant or child
could be severely injured or killed by an could be severely injured or killed by ancould be severely injured or killed by an could be severely injured or killed by an
could be severely injured or killed by an
airbag deployment in case of an accident. airbag deployment in case of an accident.airbag deployment in case of an accident. airbag deployment in case of an accident.
airbag deployment in case of an accident.
o oo o
o
Modification to SRS components or wir- Modification to SRS components or wir-Modification to SRS components or wir- Modification to SRS components or wir-
Modification to SRS components or wir-
ing, including the addition of any kind of ing, including the addition of any kind ofing, including the addition of any kind of ing, including the addition of any kind of
ing, including the addition of any kind of
badges to the pad covers or modifica- badges to the pad covers or modifica-badges to the pad covers or modifica- badges to the pad covers or modifica-
badges to the pad covers or modifica-
tions to the body structure, can adversely tions to the body structure, can adverselytions to the body structure, can adversely tions to the body structure, can adversely
tions to the body structure, can adversely
affect SRS performance and lead to pos- affect SRS performance and lead to pos-affect SRS performance and lead to pos- affect SRS performance and lead to pos-
affect SRS performance and lead to pos-
sible injury. sible injury.sible injury. sible injury.
sible injury.
o oo o
o
For cleaning the airbag pad covers, use For cleaning the airbag pad covers, useFor cleaning the airbag pad covers, use For cleaning the airbag pad covers, use
For cleaning the airbag pad covers, use
only a soft, dry cloth or one which has only a soft, dry cloth or one which hasonly a soft, dry cloth or one which has only a soft, dry cloth or one which has
only a soft, dry cloth or one which has
been moistened with plain water. Sol- been moistened with plain water. Sol-been moistened with plain water. Sol- been moistened with plain water. Sol-
been moistened with plain water. Sol-
vents or cleaners could adversely affect vents or cleaners could adversely affectvents or cleaners could adversely affect vents or cleaners could adversely affect
vents or cleaners could adversely affect
the airbag covers and proper deployment the airbag covers and proper deploymentthe airbag covers and proper deployment the airbag covers and proper deployment
the airbag covers and proper deployment
of the system. of the system.of the system. of the system.
of the system.
B240C01A
Page 39 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 30
B260D01A-AAT
Turn Signal Indicator Lights Turn Signal Indicator LightsTurn Signal Indicator Lights Turn Signal Indicator Lights
Turn Signal Indicator Lights
The blinking green arrows on the instrument
panel show the direction indicated by the turn
signals. If the arrow comes on but does not
blink, blinks more rapidly than normal, or does
not illuminate at all, a malfunction in the turn
signal system is indicated. Your dealer should
be consulted for repairs.
B260E01L-AAT
Seat Belt Reminder Light Seat Belt Reminder LightSeat Belt Reminder Light Seat Belt Reminder Light
Seat Belt Reminder Light
And Chime And ChimeAnd Chime And Chime
And Chime
The seat belt reminder light comes and stays
on until the seat belt is fastened when the
ignition key is turned from the "OFF" position to
"ON" or "START". And, the warning chime will
also sound for about 6 seconds.
B260F01A-AATHigh Beam Indicator High Beam IndicatorHigh Beam Indicator High Beam Indicator
High Beam Indicator
Light LightLight Light
Light
The high beam indicator light comes on when-
ever the headlights are switched to high beam
of flash position.
B260G01A-AAT
Low Oil Pressure Warning Light Low Oil Pressure Warning LightLow Oil Pressure Warning Light Low Oil Pressure Warning Light
Low Oil Pressure Warning Light
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:
If the oil pressure warning light stays on If the oil pressure warning light stays onIf the oil pressure warning light stays on If the oil pressure warning light stays on
If the oil pressure warning light stays on
while the engine is running, serious engine while the engine is running, serious enginewhile the engine is running, serious engine while the engine is running, serious engine
while the engine is running, serious engine
damage may result. The oil pressure warn- damage may result. The oil pressure warn-damage may result. The oil pressure warn- damage may result. The oil pressure warn-
damage may result. The oil pressure warn-
ing light comes on whenever there is insuf- ing light comes on whenever there is insuf-ing light comes on whenever there is insuf- ing light comes on whenever there is insuf-
ing light comes on whenever there is insuf-
ficient oil pressure. In normal operation, it ficient oil pressure. In normal operation, itficient oil pressure. In normal operation, it ficient oil pressure. In normal operation, it
ficient oil pressure. In normal operation, it
should come on when the ignition switch is should come on when the ignition switch isshould come on when the ignition switch is should come on when the ignition switch is
should come on when the ignition switch is
turned on, then go out when the engine is turned on, then go out when the engine isturned on, then go out when the engine is turned on, then go out when the engine is
turned on, then go out when the engine is
started. If the oil pressure warning light started. If the oil pressure warning lightstarted. If the oil pressure warning light started. If the oil pressure warning light
started. If the oil pressure warning light
stays on while the engine is running, there stays on while the engine is running, therestays on while the engine is running, there stays on while the engine is running, there
stays on while the engine is running, there
may be a serious malfunction. may be a serious malfunction.may be a serious malfunction. may be a serious malfunction.
may be a serious malfunction.
If this happens, stop the car as soon as it is If this happens, stop the car as soon as it isIf this happens, stop the car as soon as it is If this happens, stop the car as soon as it is
If this happens, stop the car as soon as it is
safe to do so, turn off the engine and check safe to do so, turn off the engine and checksafe to do so, turn off the engine and check safe to do so, turn off the engine and check
safe to do so, turn off the engine and check
the oil level. If the oil level is low, fill the the oil level. If the oil level is low, fill thethe oil level. If the oil level is low, fill the the oil level. If the oil level is low, fill the
the oil level. If the oil level is low, fill the
engine oil to the proper level and start the engine oil to the proper level and start theengine oil to the proper level and start the engine oil to the proper level and start the
engine oil to the proper level and start the
engine again. If the light stays on with the engine again. If the light stays on with theengine again. If the light stays on with the engine again. If the light stays on with the
engine again. If the light stays on with the
engine running, turn the engine off immedi- engine running, turn the engine off immedi-engine running, turn the engine off immedi- engine running, turn the engine off immedi-
engine running, turn the engine off immedi-
ately. In any instance where the oil light ately. In any instance where the oil lightately. In any instance where the oil light ately. In any instance where the oil light
ately. In any instance where the oil light
stays on when the engine is running, the stays on when the engine is running, thestays on when the engine is running, the stays on when the engine is running, the
stays on when the engine is running, the
engine should be checked by a Hyundai engine should be checked by a Hyundaiengine should be checked by a Hyundai engine should be checked by a Hyundai
engine should be checked by a Hyundai
dealer before the car is driven again. dealer before the car is driven again.dealer before the car is driven again. dealer before the car is driven again.
dealer before the car is driven again.
B260B01A-AAT
SRS (Airbag) Service SRS (Airbag) ServiceSRS (Airbag) Service SRS (Airbag) Service
SRS (Airbag) Service
Reminder Indicator (SRI) Reminder Indicator (SRI)Reminder Indicator (SRI) Reminder Indicator (SRI)
Reminder Indicator (SRI)
The SRS service reminder indicator (SRI)
comes on and flashes for about 6 seconds
after the ignition key is turned to the "ON"
position or after the engine is started, after
which it will go out.
This light also comes on when the SRS is not
working properly. If the SRI does not come on,
or continuously remains on after flashing for
about 6 seconds when you turned the ignition
key to the "ON" position or started the engine,
or if it comes on while driving, have the SRS
inspected by an authorized Hyundai Dealer.
B260P02Y-GATABS Service Reminder
Indicator (SRI) (If Installed)
When the key is turned to the "ON" position, the
Anti-Lock Brake System will come on and then
go off in a few seconds. If the ABS SRI remains
on, comes on while driving, or does not come
on when the key is turned to the "ON" position,
this indicates that there may be a problem with
the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. The
normal braking system will still be operational,
but without the assistance of the anti-lock
brake system.
WARNING:If the both ABS SRI and Parking Brake/
Brake fluid level warning lights remain "ON"
or come on while driving, there may be a
problem with E.B.D (Electronic Brake Force
Distribution).
If this occurs, avoid sudden stops and have
your vehicle checked by your Hyundai dealer
as soon as possible.
Page 40 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 31
B260H03A-AAT
Parking Brake/ Parking Brake/Parking Brake/ Parking Brake/
Parking Brake/
Low Brake Fluid Level Low Brake Fluid LevelLow Brake Fluid Level Low Brake Fluid Level
Low Brake Fluid Level
Level Warning Light Level Warning LightLevel Warning Light Level Warning Light
Level Warning Light
WARNING: WARNING:WARNING: WARNING:
WARNING:
If you suspect brake trouble, have your If you suspect brake trouble, have yourIf you suspect brake trouble, have your If you suspect brake trouble, have your
If you suspect brake trouble, have your
brakes checked by a Hyundai dealer as brakes checked by a Hyundai dealer asbrakes checked by a Hyundai dealer as brakes checked by a Hyundai dealer as
brakes checked by a Hyundai dealer as
soon as possible. Driving your car with a soon as possible. Driving your car with asoon as possible. Driving your car with a soon as possible. Driving your car with a
soon as possible. Driving your car with a
problem in either the brake electrical sys- problem in either the brake electrical sys-problem in either the brake electrical sys- problem in either the brake electrical sys-
problem in either the brake electrical sys-
tem or brake hydraulic system is danger- tem or brake hydraulic system is danger-tem or brake hydraulic system is danger- tem or brake hydraulic system is danger-
tem or brake hydraulic system is danger-
ous, and could result in a serious injury or ous, and could result in a serious injury orous, and could result in a serious injury or ous, and could result in a serious injury or
ous, and could result in a serious injury or
death. death.death. death.
death.
Warning Light Operation Warning Light OperationWarning Light Operation Warning Light Operation
Warning Light OperationThe parking brake/brake fluid level warning
light should come on when the parking brake is
applied and the ignition switch is turned to "ON"
or "START". After the engine is started, the light
should go out when the parking brake is re-
leased.
If the parking brake is not applied, the warning
light should come on when the ignition switch is
turned to "ON" or "START", then go out when
the engine starts. If the light comes on at any
other time, you should slow the vehicle and
bring it to a complete stop in a safe location off
the roadway.
The brake fluid level warning light indicates that
the brake fluid level in the brake master cylinder
is low and hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications should be
added. After adding fluid, if no other trouble isfound, the car should be immediately and care-
fully driven to a Hyundai dealer for inspection.
If further trouble is experienced, the vehicle
should not be driven at all but taken to a dealer
by a professional towing service or some other
safe method.
Your Hyundai is equipped with dual-diagonal
braking systems. This means you still have
braking on two wheels even if one of the dual
systems should fail. With only one of the dual
systems working, more than normal pedal travel
and greater pedal pressure are required to stop
the car. Also, the car will not stop in as short a
distance with only half of the brake system
working. If the brakes fail while you are driving,
shift to a lower gear for additional engine brak-
ing and stop the car as soon as it is safe to do
so.
B260J01A-AATCharging System Warning Charging System WarningCharging System Warning Charging System Warning
Charging System Warning
Light LightLight Light
Light
The charging system warning light should come
on when the ignition is turned on, then go out
when the engine is running. If the light stays on
while the engine is running, there is a malfunc-
tion in the electrical charging system. If the light
comes on while you are driving, stop, turn off
the engine and check under the hood. First,
make certain the generator drive belt is in
place. If it is, check the tension of the belt.
Do this as shown on page 6-13 by pushing
down on the center of the belt. And then, have
the system checked by your Hyundai dealer.
B260M01A-AATLow Fuel Level Warning Light Low Fuel Level Warning LightLow Fuel Level Warning Light Low Fuel Level Warning Light
Low Fuel Level Warning Light
The low fuel level warning light comes on when
the fuel tank is approaching empty. When it
comes on, you should add fuel as soon as
possible. Driving with the fuel level warning
light on or with the fuel level below "E" can
cause the engine to misfire and damage the
catalytic converter.
B260L01Y-AATDoor Ajar Warning Light
and Chime
The door ajar warning light warns you that a
door is not completely closed and the chime
warns you that driver's side front door is not
completely closed.
NOTE:To remind you not to lock the key inside the
car, the warning light comes on whenever
the key is in the "LOCK" position and a door
is open. The warning chime only sounds
whenever the key is in the "LOCK" position
and the driver's side front door is open. The
chime sounds and the light remains on until
the key is removed from the ignition.
B260K01E-GATTrunk Lid (4 door)/Tail Gate
(5 door) Open Warning Light
This light remains on unless the trunk lid/tail
gate is completely closed.
Page 41 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 32
B260N01A-AATMalfunction Indicator Light
This light illuminates when there is a malfunc-
tion of an exhaust gas related component, and
the system is not functioning properly so that
the exhaust gas regulation values are not sat-
isfied. This light will also illuminate when the
ignition key is turned to the "ON" position, and
will go out in a few seconds. If it illuminates
while driving, or does not illuminate when the
ignition key is turned to the "ON" position, take
your car to your nearest authorized Hyundai
dealer and have the system checked.
B270A01A-AATBRAKE PAD WEAR WARNING SOUND BRAKE PAD WEAR WARNING SOUNDBRAKE PAD WEAR WARNING SOUND BRAKE PAD WEAR WARNING SOUND
BRAKE PAD WEAR WARNING SOUNDThe front disc brake pads have wear indicators
that should make a high-pitched squealing or
scraping noise when new pads are needed.
The sound may come and go or be heard all the
time when the vehicle is moving. It may also be
heard when the brake pedal is pushed down
firmly. Expensive rotor damage will result if the
worn pads are not replaced. See your Hyundai
dealer immediately.
B260Q01E-GATCruise Indicator (If Installed)
The cruise indicator light in the instrument
cluster is illuminated when the cruise control
main switch on the end of the barrel is pushed.
The indicator light does not illuminate when the
cruise control main switch is pushed a second
time.
Information on the use of cruise control may be
found on page 1-52.
B260A01B-GATFront Fog Indicator Light
(If Installed)
Front fog indicator light comes on whenever the
fog light switch is on.
B280B01E
B280A01E
Without Trip Computer
With Trip Computer
CRUISE
B280A01A-AATFUEL GAUGE
The needle on the gauge indicates the approxi-
mate fuel level in the fuel tank. The fuel capacity
is given in Section 9.
B260C02E-GATTraction Control Indicator
Light (If Installed)
The traction control indicator changes opera-
tion according to the ignition switch position
and whether or not the system is in operation.
It will also illuminate when the ignition key is
turned to the "ON" position, and then go off in a
few seconds. If the TCS indicator stays on,
take your car to your authorized Hyundai dealer
and have the system checked. See section 2
for more information about the TCS system.
Page 43 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 34
HLZ.079T
B310B01E
1
2
3
Reset switch
B310B04E-AATODOMETER/TRIP ODOMETER
HLW.079F
Without Trip Computer
OdometerRecords the total distance the vehicle has been
driven.
NOTE:Federal law forbids alteration of the odom-
eter of any vehicle with the intent to change
the number of the odometer.
The alteration of the odometer may void
your warranty coverage.
Function of digital odometer/trip odom-
eter
Pushing in the reset switch under the right side
of the speedometer when the ignition switch is
turned "ON" will display the following sequence:
1. OdometerThe odometer records the total driving distance
in miles or kilometers.
2,3 Trip odometerRecords the distance of 2 trips in miles or
kilometers.
TRIP A: first distance you have traveled from
your origination point to a first destination.
TRIP B: Second distance from the first destina-
tion to the final destination. The tachometer registers the speed of your
engine in revolutions per minute (rpm). It is
useful to help you shift at the appropriate en-
gine speed to avoid lugging or over-revving the
engine.
CAUTION:The engine should not be raced to such a
speed that the needle enters the red zone on
the tachometer face. This can cause severe
engine damage and may void your war-
ranty.
B330B01E-1
With Trip Computer
Page 46 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 37
B340B01A-AAT
Lane Change Signal Lane Change SignalLane Change Signal Lane Change Signal
Lane Change Signal
signal indicator light blinks more rapidly than
usual, goes on but does not blink, or does not
go on at all, there is a malfunction in the system.
Check for a burned-out fuse or bulb or see your
Hyundai dealer.
3A9CA42
To indicate a lane change, move the lever up or
down to a point where it begins flashing.
The lever will automatically return to the center
position when released.
B340C03A-AAT
Headlight Switch Headlight SwitchHeadlight Switch Headlight Switch
Headlight Switch
To operate the headlights, turn the barrel on the
end of the multi-function switch. The first posi-
tion turns on the parking lights, sidelights, tail
lights and instrument panel lights. The second
position turns on the headlights.
NOTE:The ignition must be in the "ON" position The ignition must be in the "ON" positionThe ignition must be in the "ON" position The ignition must be in the "ON" position
The ignition must be in the "ON" position
to turn on the headlights. to turn on the headlights.to turn on the headlights. to turn on the headlights.
to turn on the headlights.
Parking light auto cutIf you do not turn the parking lights "OFF" after
driving, the parking lights will automatically shut
"OFF" when the driver's door is opened.
To turn them "ON" again you must simply turn
the ignition key to the "ON" position.
3A9CA43
B340E01A-AAT
Headlight Flasher Headlight FlasherHeadlight Flasher Headlight Flasher
Headlight Flasher
To flash the headlights, pull the switch lever
toward you, then release it. The headlights can
be flashed even though the headlight switch is
in the "OFF" position.
B340D01A-AAT
High-beam Switch High-beam SwitchHigh-beam Switch High-beam Switch
High-beam SwitchTo turn on the headlight high beams, push the
lever forward (away from you). The high beam
indicator light will come on at the same time.
For low beams, pull the lever back toward you.
3A9CA45
Page 48 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 39
B380A01A-AAT
REAR WINDOW DEFROSTER SWITCH REAR WINDOW DEFROSTER SWITCHREAR WINDOW DEFROSTER SWITCH REAR WINDOW DEFROSTER SWITCH
REAR WINDOW DEFROSTER SWITCH
The rear window defroster is turned on by
pushing in the switch. To turn the defroster off,
push the switch a second time. The rear
window defroster automatically turns itself off
after about 15 minutes. To restart the defroster
cycle, push in the switch again after it has
turned itself off.
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:Do not clean the inner side of the rear Do not clean the inner side of the rearDo not clean the inner side of the rear Do not clean the inner side of the rear
Do not clean the inner side of the rear
window glass with an abrasive type of glass window glass with an abrasive type of glasswindow glass with an abrasive type of glass window glass with an abrasive type of glass
window glass with an abrasive type of glass
cleaner or use a scraper to remove foreign cleaner or use a scraper to remove foreigncleaner or use a scraper to remove foreign cleaner or use a scraper to remove foreign
cleaner or use a scraper to remove foreign
deposits from the inner surface of the glass deposits from the inner surface of the glassdeposits from the inner surface of the glass deposits from the inner surface of the glass
deposits from the inner surface of the glass
as this may cause damage to the defroster as this may cause damage to the defrosteras this may cause damage to the defroster as this may cause damage to the defroster
as this may cause damage to the defroster
elements. elements.elements. elements.
elements.
NOTE:The ignition must be in the "ON" position
for the rear window defroster to operate.
B370A01A-AAT
HAZARD WARNING SYSTEM HAZARD WARNING SYSTEMHAZARD WARNING SYSTEM HAZARD WARNING SYSTEM
HAZARD WARNING SYSTEM
The hazard warning system should be used
whenever you find it necessary to stop the car
in a hazardous location. When you must make
such an emergency stop, always pull off the
road as far as possible.
The hazard warning lights are turned on by
pushing in the hazard switch. This causes all
turn signal lights to blink. The hazard warning
lights will operate even though the key is not in
the ignition.
To turn the hazard warning lights off, push the
switch a second time.
B380A01E
B370A01E-2
Do not operate the wiper when the window is
dry; this can result in scratching as well as
premature wiper blade wear.
For the reason stated above,do not operate the
washer when the washer fluid reservoir is
empty.B390A02S-AATREAR WINDOW WIPER AND WASHER
(If Installed)
B390A01E-1
The rear window wiper and washer are turned
on by depressing the button. Washer fluid is
sprayed onto the glass as long as the " "
is depressed.
1. When the "ON" position is depressed, the
rear window wiper starts to operate continu-
ously.
2. When the "INT" position is depressed, the
interval between wipes operates every five
seconds intermittently.
3. When the " " position is depressed, the
rear window wiper starts to operate three
times after the washer fluid sprays onto the
rear window.
Do not operate the washer continuously for
more than 15 seconds or when the fluid reser-
voir is empty; this could damage the system.
Page 51 of 172
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 42
B460C01S-AAT
Tilting the Sunroof Tilting the SunroofTilting the Sunroof Tilting the Sunroof
Tilting the Sunroof
The sunroof can be tilted by pushing the button
with the sunroof closed. Release the button
when the sunroof reaches the desired position.
NOTE:After washing the car or after there is rain,
be sure to wipe off any water that is on the
sunroof before operating it.
B460A01S-AAT
SUNROOF (If Installed) SUNROOF (If Installed)SUNROOF (If Installed) SUNROOF (If Installed)
SUNROOF (If Installed)The sunroof can be operated with the ignition
key in the "ON" position
B460C01E/SSA1331C
B460B01E-AATOPERATING THE SUNROOF SYSTEM
Opening or Closing the Sunroof
B460B01E
The sunroof can be only electrically opened or
closed. To open or to close, press and hold the
button located in the front overhead console.
Release the button when the sunroof reaches
the desired position.
WARNING: WARNING:WARNING: WARNING:
WARNING:o oo o
o
Do not close a sunroof if anyone's hands, Do not close a sunroof if anyone's hands,Do not close a sunroof if anyone's hands, Do not close a sunroof if anyone's hands,
Do not close a sunroof if anyone's hands,
arms or body are between the sliding arms or body are between the slidingarms or body are between the sliding arms or body are between the sliding
arms or body are between the sliding
glass and the sunroof sash, as this could glass and the sunroof sash, as this couldglass and the sunroof sash, as this could glass and the sunroof sash, as this could
glass and the sunroof sash, as this could
result in an injury. result in an injury.result in an injury. result in an injury.
result in an injury.
o oo o
o
Do not place your head or arms out of the Do not place your head or arms out of theDo not place your head or arms out of the Do not place your head or arms out of the
Do not place your head or arms out of the
sunroof opening at any time. sunroof opening at any time.sunroof opening at any time. sunroof opening at any time.
sunroof opening at any time.
CAUTION:o Do not open the sunroof in severely cold
temperature or when it is covered with
ice or snow.
o Periodically remove any dirt that may
have accumulated on the guide rails.
B470A01S-AAT
SUNSHADE SUNSHADESUNSHADE SUNSHADE
SUNSHADE
JN10680A
The sunshade can be opened and closed by
sliding it forward or rearward when the sunroof
is closed. The sunshade will open automati-
cally when the sunroof is opened, but it must be
closed manually.