maintenance schedule Hyundai Elantra 2003 Owner's Manual

DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI
2- 6
C090G01A-AAT
o L (Low gear): o L (Low gear):o L (Low gear): o L (Low gear):
o L (Low gear):Use for driving up a very steep grade or for
engine braking when descending steep hills.
When downshifting to "L", the transaxle will tem-
porarily remain in second gear until the vehicle
has slowed enough for low gear to engage. Do
not exceed 31 mph (50 km/h) in low gear.
C090I02Y-AAT
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:o oo o
o
Shift into "R" and "P" position only when Shift into "R" and "P" position only whenShift into "R" and "P" position only when Shift into "R" and "P" position only when
Shift into "R" and "P" position only when
the vehicle has completely stopped. the vehicle has completely stopped.the vehicle has completely stopped. the vehicle has completely stopped.
the vehicle has completely stopped.
o oo o
o
Do not accelerate the engine in reverse or Do not accelerate the engine in reverse orDo not accelerate the engine in reverse or Do not accelerate the engine in reverse or
Do not accelerate the engine in reverse or
any of the forward positions with the any of the forward positions with theany of the forward positions with the any of the forward positions with the
any of the forward positions with the
brakes applied. brakes applied.brakes applied. brakes applied.
brakes applied.
o oo o
o
Always apply the footbrake when shifting Always apply the footbrake when shiftingAlways apply the footbrake when shifting Always apply the footbrake when shifting
Always apply the footbrake when shifting
from "P" or "N", to "R", "D", "3", "2" or "L" from "P" or "N", to "R", "D", "3", "2" or "L"from "P" or "N", to "R", "D", "3", "2" or "L" from "P" or "N", to "R", "D", "3", "2" or "L"
from "P" or "N", to "R", "D", "3", "2" or "L"
position. position.position. position.
position.
o oo o
o
Do not use the "P" (Park) position in place Do not use the "P" (Park) position in placeDo not use the "P" (Park) position in place Do not use the "P" (Park) position in place
Do not use the "P" (Park) position in place
of the parking brake. Always set the park- of the parking brake. Always set the park-of the parking brake. Always set the park- of the parking brake. Always set the park-
of the parking brake. Always set the park-
ing brake, shift the transaxle into "P" (Park) ing brake, shift the transaxle into "P" (Park)ing brake, shift the transaxle into "P" (Park) ing brake, shift the transaxle into "P" (Park)
ing brake, shift the transaxle into "P" (Park)
position and turn off the ignition when position and turn off the ignition whenposition and turn off the ignition when position and turn off the ignition when
position and turn off the ignition when
you leave the vehicle, even momentarily. you leave the vehicle, even momentarily.you leave the vehicle, even momentarily. you leave the vehicle, even momentarily.
you leave the vehicle, even momentarily.
Never leave the vehicle unattended while Never leave the vehicle unattended whileNever leave the vehicle unattended while Never leave the vehicle unattended while
Never leave the vehicle unattended while
the engine is running. the engine is running.the engine is running. the engine is running.
the engine is running.
o oo o
o
Check the automatic transaxle fluid level Check the automatic transaxle fluid levelCheck the automatic transaxle fluid level Check the automatic transaxle fluid level
Check the automatic transaxle fluid level
regularly, and add fluid as necessary. regularly, and add fluid as necessary.regularly, and add fluid as necessary. regularly, and add fluid as necessary.
regularly, and add fluid as necessary.
See the maintenance schedule for the See the maintenance schedule for theSee the maintenance schedule for the See the maintenance schedule for the
See the maintenance schedule for the
proper fluid recommendation. proper fluid recommendation.proper fluid recommendation. proper fluid recommendation.
proper fluid recommendation.
C090H01Y-AAT
NOTE: NOTE:NOTE: NOTE:
NOTE:o oo o
o
For smooth and safe operation, depress For smooth and safe operation, depressFor smooth and safe operation, depress For smooth and safe operation, depress
For smooth and safe operation, depress
the brake pedal when shifting from "Neu- the brake pedal when shifting from "Neu-the brake pedal when shifting from "Neu- the brake pedal when shifting from "Neu-
the brake pedal when shifting from "Neu-
tral" position or "Park" position to a for- tral" position or "Park" position to a for-tral" position or "Park" position to a for- tral" position or "Park" position to a for-
tral" position or "Park" position to a for-
ward or reverse gear. ward or reverse gear.ward or reverse gear. ward or reverse gear.
ward or reverse gear.
o oo o
o
The ignition key must be in the "ON" The ignition key must be in the "ON"The ignition key must be in the "ON" The ignition key must be in the "ON"
The ignition key must be in the "ON"
position and the brake pedal fully de- position and the brake pedal fully de-position and the brake pedal fully de- position and the brake pedal fully de-
position and the brake pedal fully de-
pressed in order to move the shift lever pressed in order to move the shift leverpressed in order to move the shift lever pressed in order to move the shift lever
pressed in order to move the shift lever
from the "P" (Park) position to any of the from the "P" (Park) position to any of thefrom the "P" (Park) position to any of the from the "P" (Park) position to any of the
from the "P" (Park) position to any of the
other positions. other positions.other positions. other positions.
other positions.
C090F01A-AAT
o 2 (Second gear): o 2 (Second gear):o 2 (Second gear): o 2 (Second gear):
o 2 (Second gear):Use for driving on a slippery road, hill climbing or
engine braking downhill. "2" automatically shifts
between first and second gears.
This means that no shift-up to 3rd gear is per-
formed. However, the shift-up to third gear is
done when the car speed exceeds a certain
value to prevent the engine from over-revving.
Manually move the selector to "D" returning to
normal driving condition.
C090D02A-AAT
o N (Neutral): o N (Neutral):o N (Neutral): o N (Neutral):
o N (Neutral):In the "N" position, the transaxle is in neutral,
which means that no gears are engaged. The
engine can be started with the shift lever in "N"
position, although this is not recommended ex-
cept if the engine stalls while the car is moving.
C090E01A-AAT
o D (Drive): o D (Drive):o D (Drive): o D (Drive):
o D (Drive):Use for normal driving. The transaxle will auto-
matically shift through a four-gear sequence.
Never downshift manually to "2" position or "L"
position when vehicle speed is more than 60 mph
(96 km/h).
C090Q01A-GAT
o 3 (Third gear): o 3 (Third gear):o 3 (Third gear): o 3 (Third gear):
o 3 (Third gear):Use for towing a trailer during hill climbing or to
use engine braking downhill.
"3" automatically shifts between 1st, 2nd and 3rd
gears. This means that no shift-up to 4th gear is
performed. However, the shift-up to 4th gear is
done when the car speed exceeds a certain
value to prevent the engine from over-revving.
Manually move the selector to "D" when return-
ing to normal driving condition.o oo o
o
It is always possible to shift from "R", "N", It is always possible to shift from "R", "N",It is always possible to shift from "R", "N", It is always possible to shift from "R", "N",
It is always possible to shift from "R", "N",
"D", "3", "2", "L" position to "P" position. "D", "3", "2", "L" position to "P" position."D", "3", "2", "L" position to "P" position. "D", "3", "2", "L" position to "P" position.
"D", "3", "2", "L" position to "P" position.
The vehicle must be fully stopped to avoid The vehicle must be fully stopped to avoidThe vehicle must be fully stopped to avoid The vehicle must be fully stopped to avoid
The vehicle must be fully stopped to avoid
transaxle damage. transaxle damage.transaxle damage. transaxle damage.
transaxle damage.

DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI
2- 10
C160C01A-AATUse High Quality Ethylene Glycol Use High Quality Ethylene GlycolUse High Quality Ethylene Glycol Use High Quality Ethylene Glycol
Use High Quality Ethylene Glycol
Coolant CoolantCoolant Coolant
Coolant
Your Hyundai is delivered with high quality ethyl-
ene glycol coolant in the cooling system. It is the
only type of coolant that should be used because
it helps prevent corrosion in the cooling system,
lubricates the water pump and prevents freezing.
Be sure to replace or replenish your coolant in
C150A01A-AAT
SMOOTH CORNERING SMOOTH CORNERINGSMOOTH CORNERING SMOOTH CORNERING
SMOOTH CORNERINGAvoid braking or gear changing in corners, espe-
cially when roads are wet. Ideally, corners should
always be taken under gentle acceleration. If you
follow these suggestions, tire wear will be held to
a minimum.
C160A01A-AAT
WINTER DRIVING WINTER DRIVINGWINTER DRIVING WINTER DRIVING
WINTER DRIVINGThe more severe weather conditions of winter
result in greater wear and other problems. To
minimize the problems of winter driving, you
should follow these suggestions:
C160B01A-AAT
Snowy or Icy Conditions Snowy or Icy ConditionsSnowy or Icy Conditions Snowy or Icy Conditions
Snowy or Icy ConditionsTo drive your vehicle in deep snow, it may be
necessary to use snow tires or to install tire
chains on your tires. If snow tires are needed, it
is necessary to select tires equivalent in size and
type to the original equipment tires. Failure to do
so may adversely affect the safety and handling
of your car. Speeding, rapid acceleration, sud-
den brake applications, and sharp turns are
potentially very hazardous practices.
During deceleration, use engine braking to the
fullest extent. Sudden brake applications on
snowy or icy roads may cause skids to occur.
You need to keep sufficient distance between the
vehicle in front and your vehicle. Also, apply the
brake gently. It should be noted that installing tire
chains on the tire will provide a greater driving
force, but will not prevent side skids.
NOTE: NOTE:NOTE: NOTE:
NOTE:Tire chains are not legal in all states. Check Tire chains are not legal in all states. CheckTire chains are not legal in all states. Check Tire chains are not legal in all states. Check
Tire chains are not legal in all states. Check
state laws before fitting tire chains. state laws before fitting tire chains.state laws before fitting tire chains. state laws before fitting tire chains.
state laws before fitting tire chains. o Remember, your Hyundai does not require
extended warm-up. As soon as the engine is
running smoothly, you can drive away. In
very cold weather, however, give your engine
a slightly longer warm-up period.
o Don't "lug" or "over-rev" the engine. Lugging
is driving too slowly in too high a gear result-
ing in the engine bucking. If this happens, shift
to a lower gear. Over-revving is racing the
engine beyond its safe limit. This can be
avoided by shifting at the recommended
speeds.
o Use your air conditioning sparingly. The air
conditioning system is operated by engine
power so your fuel economy is reduced when
you use it. o Take care of your tires. Keep them inflated to
the recommended pressure. Incorrect infla-
tion, either too much or too little, results in
unnecessary tire wear. Check the tire pres-
sures at least once a month.
o Be sure that the wheels are aligned correctly.
Improper alignment can result from hitting
curbs or driving too fast over irregular surfac-
es. Poor alignment causes faster tire wear
and may also result in other problems as well
as greater fuel consumption.
o Keep your car in good condition. For better
fuel economy and reduced maintenance
costs, maintain your car in accordance with
the maintenance schedule in Section 5. If you
drive your car in severe conditions, more
frequent maintenance is required (see Sec-
tion 5 for details).
o Keep your car clean. For maximum service,
your Hyundai should be kept clean and free of
corrosive materials. It is especially important
that mud, dirt, ice, etc. not be allowed to
accumulate on the underside of the car. This
extra weight can result in increased fuel con-
sumption and also contribute to corrosion.
o Travel lightly. Don't carry unnecessary weight
in your car. Weight reduces fuel economy.
o Don't let the engine idle longer than neces-
sary. If you are waiting (and not in traffic), turn
off your engine and restart only when you're
ready to go.

DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI
2- 11 accordance with the maintenance schedule in
Section 5. Before winter, have your coolant test-
ed to assure that its freezing point is sufficient for
the temperatures anticipated during the winter.
C160D01A-AAT
Check Battery and Cables Check Battery and CablesCheck Battery and Cables Check Battery and Cables
Check Battery and CablesWinter puts additional burdens on the battery
system. Visually inspect the battery and cables
as described in Section 6. The level of charge in
your battery can be checked by your Hyundai
dealer or a service station.
C160E01A-AATChange to "Winter Weight" Oil if Change to "Winter Weight" Oil ifChange to "Winter Weight" Oil if Change to "Winter Weight" Oil if
Change to "Winter Weight" Oil if
Necessary NecessaryNecessary Necessary
Necessary
In some climates it is recommended that a lower
viscosity "winter weight" oil be used during cold
weather. See Section 9 for recommendations. If
you aren't sure what weight oil you should use,
consult your Hyundai dealer.
C160F01A-AATCheck Spark Plugs and Ignition Check Spark Plugs and IgnitionCheck Spark Plugs and Ignition Check Spark Plugs and Ignition
Check Spark Plugs and Ignition
System SystemSystem System
System
Inspect your spark plugs as described in Section
6 and replace them if necessary. Also check all
ignition wiring and components to be sure they
are not cracked, worn or damaged in any way.
C160G01A-AAT
To Keep Locks from Freezing To Keep Locks from FreezingTo Keep Locks from Freezing To Keep Locks from Freezing
To Keep Locks from FreezingTo keep the locks from freezing, squirt an ap-
proved de-icer fluid or glycerine into the key
opening. If a lock is covered with ice, squirt it with
an approved de-icing fluid to remove the ice. If
the lock is frozen internally, you may be able to
thaw it out by using a heated key. Handle the
heated key with care to avoid burning the fingers.
C160H01A-AATUse Approved Anti-Freeze in Window Use Approved Anti-Freeze in WindowUse Approved Anti-Freeze in Window Use Approved Anti-Freeze in Window
Use Approved Anti-Freeze in Window
Washer System Washer SystemWasher System Washer System
Washer System
To keep the water in the window washer system
from freezing, add an approved anti-freeze solu-
tion in accordance with instructions on the con-
tainer. Window washer anti-freeze is available
from Hyundai dealers and most auto parts out-
lets. Do not use engine coolant or other types of
anti-freeze as these may damage the finish.
C160I01A-AAT
Don't Let Your Parking Brake Freeze Don't Let Your Parking Brake FreezeDon't Let Your Parking Brake Freeze Don't Let Your Parking Brake Freeze
Don't Let Your Parking Brake FreezeUnder some conditions your parking brake can
freeze in the engaged position. This is most likely
to happen when there is an accumulation of snow
or ice around or near the rear brakes or if the
brakes are wet. If there is a risk the parking brake
may freeze, apply it only temporarily while you
put the gear selector lever in "P" (automatic) or in
first or reverse gear (manual transaxle) and
block the rear wheels so the car cannot roll. Then
release the parking brake.
C160K01A-AAT
Carry Emergency Equipment Carry Emergency EquipmentCarry Emergency Equipment Carry Emergency Equipment
Carry Emergency EquipmentDepending on the severity of the weather where
you drive your car, you should carry appropriate
emergency equipment. Some of the items you
may want to carry include tire chains, tow straps
or chains, flashlight, emergency flares, sand, a
shovel, jumper cables, a window scraper, gloves,
ground cloth, coveralls, a blanket, etc.
C160J01A-AAT
Don't Let Ice and Snow Accumulate Don't Let Ice and Snow AccumulateDon't Let Ice and Snow Accumulate Don't Let Ice and Snow Accumulate
Don't Let Ice and Snow Accumulate
Underneath UnderneathUnderneath Underneath
Underneath
Under some conditions, snow and ice can build
up under the fenders and interfere with the steer-
ing. When driving in severe winter conditions
where this may happen, you should periodically
check underneath the car to be sure the move-
ment of the front wheels and the steering compo-
nents is not obstructed.
C170A01A-AAT
HIGHER SPEED MOTORING HIGHER SPEED MOTORINGHIGHER SPEED MOTORING HIGHER SPEED MOTORING
HIGHER SPEED MOTORING
Pre-Trip Inspections Pre-Trip InspectionsPre-Trip Inspections Pre-Trip Inspections
Pre-Trip Inspections
1. Tires:
Adjust the tire inflation pressures to specifica-
tion. Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using worn or damaged tires which may
result in reduced traction or tire failure.

VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTSVEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
VEHICLE MAINTENANCE REQUIREMENTS
5-1
F010C01A-AAT
Specified Scheduled Procedures Specified Scheduled ProceduresSpecified Scheduled Procedures Specified Scheduled Procedures
Specified Scheduled ProceduresThese are the procedures such as inspec-
tions, adjustments and replacements that are
listed in the maintenance charts starting on
page 5-3. These procedures must be per-
formed at the intervals shown in the mainte-
nance schedule to assure that your warranty
remains in effect. Although it is strongly rec-
ommended that they be performed by the
trained technicians at your Hyundai dealer,
these procedures may be performed at any
qualified service facility.
It is suggested that genuine Hyundai service
parts be used for any required repairs or
replacements. Other parts of equivalent qual-
ity such as engine oil, engine coolant, manual
or auto transaxle oil, brake fluid and so on
which are not supplied by Hyundai Motor
Company or its distributor may be used with-
out affecting your warranty coverage but you
should always be sure these are equivalent to
the quality of the original Hyundai parts. Your
Owner's Handbook provides further informa-
tion about your warranty coverage.
5. 5.5. 5.
5.
VEHICLE VEHICLEVEHICLE VEHICLE
VEHICLE
MAINTENANCE MAINTENANCEMAINTENANCE MAINTENANCE
MAINTENANCE
REQUIREMENTS REQUIREMENTSREQUIREMENTS REQUIREMENTS
REQUIREMENTSF010E01A-AAT
Do-It-Yourself Maintenance Do-It-Yourself MaintenanceDo-It-Yourself Maintenance Do-It-Yourself Maintenance
Do-It-Yourself MaintenanceIf you are mechanically inclined, own a few tools
that are required and want to take the time to do
so, you can inspect and service a number of
items. For more information about doing it
yourself, see Section 6.
F010D01A-AAT
General Checks General ChecksGeneral Checks General Checks
General ChecksThese are the regular checks you should
perform when you drive your Hyundai or you
fill the fuel tank. A list of these items will be
found on page 6-3.
F010A01A-AAT
MAINTENANCE INTERVALS MAINTENANCE INTERVALSMAINTENANCE INTERVALS MAINTENANCE INTERVALS
MAINTENANCE INTERVALS
Service Requirements Service RequirementsService Requirements Service Requirements
Service Requirements
To ensure that you receive the greatest num-
ber of miles of satisfying operation from your
Hyundai, certain maintenance procedures
must be performed. Although careful design
and engineering have reduced these to a
minimum, those that are required are of the
utmost importance.
It is your responsibility to have these mainte-
nance procedures performed to comply with
the terms of the warranties covering your new
Hyundai. The Owner's Handbook supplied
with your new vehicle provides further infor-
mation about these warranties.
F010B01A-AAT
Maintenance Requirements Maintenance RequirementsMaintenance Requirements Maintenance Requirements
Maintenance RequirementsThe maintenance required for your Hyundai
can be divided into three main areas:
o Specified scheduled procedures
o General checks
o Do-it-yourself maintenance
F010F01A-AAT
A Few Tips A Few TipsA Few Tips A Few Tips
A Few Tipso Whenever you have your Hyundai ser-
viced, keep copies of the service records
in your glovebox. This will help assure you
can document the required procedures
being performed to keep your warranties
in effect. This is especially important when
service is not performed by an authorized
Hyundai dealer.
o If you choose to do your own maintenance
and repairs, you may find it helpful to have
an official Hyundai Shop Manual. A copy of
this publication may be purchased at your
Hyundai dealer's parts department.
5 55 5
5

VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTSVEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
VEHICLE MAINTENANCE REQUIREMENTS
5- 2
F020A02S-AAT
SCHEDULED MAINTENANCE SCHEDULED MAINTENANCESCHEDULED MAINTENANCE SCHEDULED MAINTENANCE
SCHEDULED MAINTENANCE
REQUIREMENTS REQUIREMENTSREQUIREMENTS REQUIREMENTS
REQUIREMENTS
o Inspection should be performed any time
a malfunction is experienced or suspected.
o Receipts for all emission control system
services should be retained to demon-
strate compliance with conditions of the
emissions system warranty.
o After 120 months or 150,000 miles
(240,000 km), continue to follow the pre-
scribed maintenance intervals.
o For severe usage maintenance requi-
rements, see page 5-5 of this section.

VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTSVEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
VEHICLE MAINTENANCE REQUIREMENTS
5-3 Note:
*1 - IN CASE OF REMOVING INJECTOR FOR INSPECTION, INSULATOR AND O-RING OF INJECTOR SHOULD BE CHANGED
WITH NEW ONE.
*2 - REPLACE EVERY 100,000 MILES OR 10 YEARS
F030A01A-AAT
SCHEDULED MAINTENANCE SCHEDULED MAINTENANCESCHEDULED MAINTENANCE SCHEDULED MAINTENANCE
SCHEDULED MAINTENANCEThe following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services
to protect your emission warranty. Where both mileage and time are shown, the frequency of service is determined by whichever occurs first.
F030B04E-AATR :Replace I : Inspect and, after inspection, clean, adjust, repair or replace if necessary.
DESCRIPTION
EMISSION CONTROL ITEMS
ENGINE OIL AND FILTER
FUEL FILTER
FUEL LINES, FUEL HOSES AND CONNECTIONS
INSULATOR OF FUEL INJECTOR (2.0 L SULEV Only)
VACUUM AND CRANKCASE VENTILATION HOSES
VAPOR HOSE AND FUEL FILLER CAP
AIR CLEANER FILTER
SPARK PLUGS
VALVE CLEARANCE No.
1
2
3
4
5
6
7
8MILES X 1000
KILOMETERS X 1000
MONTHS7.5
12
6
R15
24
12
R22.5
36
18
R30
48
24
R
I
I*
1
I
R37.5
60
30
R45
72
36
R52.5
84
42
R
R
I60
96
48
R
I
R
I
R
R
I67.5
108
54
R75
120
60
R82.5
132
66
R90
144
72
R
I
I*
1
I
R97.5
156
78
R105
168
84
R
R
I112.5
180
90
R120
192
96
R
I
R
I
R
R
I127.5
204
102
R135
216
108
R142.5
228
114
R150
240
120
R
I
I*
1
I
R
PLATINUM COATED (2.0L)
IRIDIUM COATED (2.0L SULEV)
See Note *2

VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTSVEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
VEHICLE MAINTENANCE REQUIREMENTS
5- 6
F060A01A-AAT
EXPLANATION OF SCHEDULED EXPLANATION OF SCHEDULEDEXPLANATION OF SCHEDULED EXPLANATION OF SCHEDULED
EXPLANATION OF SCHEDULED
MAINTENANCE ITEMS MAINTENANCE ITEMSMAINTENANCE ITEMS MAINTENANCE ITEMS
MAINTENANCE ITEMS
F060M01A-AAT
o oo o
o
Engine Oil and Filter Engine Oil and FilterEngine Oil and Filter Engine Oil and Filter
Engine Oil and FilterThe engine oil and filter should be changed at
the intervals specified in the maintenance
schedule. If the car is being driven in severe
conditions, more frequent oil and filter changes
are required.
F060C01A-AAT
o oo o
o
Fuel Filter Fuel FilterFuel Filter Fuel Filter
Fuel FilterA clogged filter can limit the speed at which the
vehicle may be driven, damage the emission
system and cause hard starting. If an exces-
sive amount of foreign matter accumulates in
the fuel tank, the filter may require replace-
ment more frequently.
After installing a new filter, run the engine for
several minutes, and check for leaks at the
connections. Fuel filters should be installed by
trained technicians.
F060B01A-AAT
o oo o
o
Drive Belts Drive BeltsDrive Belts Drive Belts
Drive BeltsInspect all drive belts for evidence of cuts,
cracks, excessive wear or oil saturation and
replace if necessary. Drive belts should be
checked periodically for proper tension and
adjusted as necessary.
F060D01A-AATo oo o
o
Fuel Lines, Fuel Hoses and Fuel Lines, Fuel Hoses andFuel Lines, Fuel Hoses and Fuel Lines, Fuel Hoses and
Fuel Lines, Fuel Hoses and
Connections ConnectionsConnections Connections
Connections
Check the fuel lines, fuel hoses and connec-
tions for leakage and damage. Have a trained
technician replace any damaged or leaking
parts immediately.
F060G01A-AAT
o oo o
o
Vapor Hose and Fuel Filler Cap Vapor Hose and Fuel Filler CapVapor Hose and Fuel Filler Cap Vapor Hose and Fuel Filler Cap
Vapor Hose and Fuel Filler CapThe vapor hose and fuel filler cap should be
inspected at those intervals specified in the
maintenance schedule. Make sure that a new
vapor hose or fuel filler cap is correctly re-
placed.
F060F01A-AATo oo o
o
Vacuum, Crankcase Vacuum, CrankcaseVacuum, Crankcase Vacuum, Crankcase
Vacuum, Crankcase
Ventilation Hoses Ventilation HosesVentilation Hoses Ventilation Hoses
Ventilation Hoses
Inspect the surface of hoses for evidence of
heat and/or mechanical damage. Hard and
brittle rubber, cracking, tears, cuts, abra-
sions, and excessive swelling indicate dete-
rioration. Particular attention should be paid to
examine those hose surfaces nearest to high
heat sources, such as the exhaust manifold.
Inspect the hose routing to assure that the
hoses do not come in contact with any heat
source, sharp edges or moving component
which might cause heat damage or mechani-
cal wear. Inspect all hose connections, such
as clamps and couplings, to make sure they
are secure, and that no leaks are present.
Hoses should be replaced immediately if there
is any evidence of deterioration or damage.
F060H01A-AAT
o Air cleaner filter o Air cleaner filtero Air cleaner filter o Air cleaner filter
o Air cleaner filterA Genuine Hyundai air cleaner filter is recom-
mended when the filter is replaced.
F060J01A-AAT
o Spark plugs o Spark plugso Spark plugs o Spark plugs
o Spark plugsMake sure to install new spark plugs of the
correct heat range.
F060E01A-AAT
o oo o
o
Timing belt Timing beltTiming belt Timing belt
Timing beltInspect all parts related to the timing belt for
damage and deformation. Replace any dam-
aged parts immediately.
F070C01A-AAT
o Engine coolant o Engine coolanto Engine coolant o Engine coolant
o Engine coolantThe coolant should be changed at the
intervals specified in the maintenance sched-
ule.
F060N02E-AAT
o oo o
o
Valve Clearance Valve ClearanceValve Clearance Valve Clearance
Valve ClearanceInspect excessive valve noise and/or engine
vibration and adjust if necessary. A qualified
technician should perform the operation.

VEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTSVEHICLE MAINTENANCE REQUIREMENTS VEHICLE MAINTENANCE REQUIREMENTS
VEHICLE MAINTENANCE REQUIREMENTS
5-7
F070E05A-AAT
o Automatic Transaxle Fluid o Automatic Transaxle Fluido Automatic Transaxle Fluid o Automatic Transaxle Fluid
o Automatic Transaxle FluidThe fluid level should be in the "HOT" range
of the dipstick, after the engine and transaxle
are at normal operating temperature. Check
the automatic transaxle fluid level with the
engine running and the transaxle in neutral,
with the parking brake properly applied. Use
HYUNDAI GENUINE ATF, DIAMOND ATF
SP-III or SK ATF SP-III when adding or
changing fluid.
F070F01A-AAT
o oo o
o
Brake Hoses and Lines Brake Hoses and LinesBrake Hoses and Lines Brake Hoses and Lines
Brake Hoses and LinesVisually check for proper installation, chafing,
cracks, deterioration and any leakage. Re-
place any deteriorated or damaged parts
immediately.
F070G02A-AAT
o Brake Fluid o Brake Fluido Brake Fluid o Brake Fluid
o Brake FluidCheck brake fluid level in the brake fluid
reservoir. The level should be between "MIN"
and "MAX" marks on the side of the reservoir.
Use only hydraulic brake fluid conforming to
DOT 3 or DOT 4.
F070D01A-AAT
o Manual transaxle oil o Manual transaxle oilo Manual transaxle oil o Manual transaxle oil
o Manual transaxle oilInspect the manual transaxle oil according to
the maintenance schedule.
NOTE: NOTE:NOTE: NOTE:
NOTE:If the oil level is low, check for possible If the oil level is low, check for possibleIf the oil level is low, check for possible If the oil level is low, check for possible
If the oil level is low, check for possible
leaks before adding oil. Do not overfill. leaks before adding oil. Do not overfill.leaks before adding oil. Do not overfill. leaks before adding oil. Do not overfill.
leaks before adding oil. Do not overfill.
F070H01A-AATo oo o
o
Rear Brake Drums/Linings, Rear Brake Drums/Linings,Rear Brake Drums/Linings, Rear Brake Drums/Linings,
Rear Brake Drums/Linings,
Parking Brake Parking BrakeParking Brake Parking Brake
Parking Brake
Check the rear brake drums and linings for
scoring, burning, leaking fluid, broken parts,
and excessive wear. Inspect the parking
brake system including the parking brake
lever and cables. For detailed service proce-
dures, refer to the Shop Manual.
F070J01A-AAT
o Brake Pads, Calipers and Rotors o Brake Pads, Calipers and Rotorso Brake Pads, Calipers and Rotors o Brake Pads, Calipers and Rotors
o Brake Pads, Calipers and RotorsCheck the pads for excessive wear, discs for
run out and wear, and calipers for fluid leak-
age.
F070K01A-AAT
o Exhaust Pipe and Muffler o Exhaust Pipe and Mufflero Exhaust Pipe and Muffler o Exhaust Pipe and Muffler
o Exhaust Pipe and MufflerVisually inspect the exhaust pipes, muffler
and hangers for cracks, deterioration, or dam-
age. Start the engine and listen carefully for
any exhaust gas leakage. Tighten connec-
tions or replace parts as necessary.
F070L01A-AAT
o Suspension Mounting Bolts o Suspension Mounting Boltso Suspension Mounting Bolts o Suspension Mounting Bolts
o Suspension Mounting BoltsCheck the suspension connections for loose-
ness or damage. Retighten to the specified
torque.
F070N01A-AATo oo o
o
Power Steering Pump, Belt and Hoses Power Steering Pump, Belt and HosesPower Steering Pump, Belt and Hoses Power Steering Pump, Belt and Hoses
Power Steering Pump, Belt and HosesCheck the power steering pump and hoses
for leakage and damage. Replace any dam-
aged or leaking parts immediately. Inspect the
power steering belt for evidence of cuts,
cracks, excessive wear, oiliness and proper
tension. Replace or adjust it if necessary.
F070P01A-AAT
o Driveshafts and Boots o Driveshafts and Bootso Driveshafts and Boots o Driveshafts and Boots
o Driveshafts and BootsCheck the drive shafts, boots and clamps for
cracks, deterioration, or damage. Replace
any damaged parts and, if necessary, repack
the grease.
F070Q01A-AAT
o oo o
o
Air Conditioning Refrigerant Air Conditioning RefrigerantAir Conditioning Refrigerant Air Conditioning Refrigerant
Air Conditioning RefrigerantCheck the air conditioning lines and connec-
tions for leakage and damage. Check air
conditioning performance according to the
relevant shop manual if necessary.
F070M01A-AATo oo o
o
Steering Gear Box, Linkage & Boots/ Steering Gear Box, Linkage & Boots/Steering Gear Box, Linkage & Boots/ Steering Gear Box, Linkage & Boots/
Steering Gear Box, Linkage & Boots/
Lower arm Ball Joint Lower arm Ball JointLower arm Ball Joint Lower arm Ball Joint
Lower arm Ball Joint
With the vehicle stopped and engine off, check
for excessive free-play in the steering wheel.
Check the linkage for bends or damage.
Check the dust boots and ball joints for dete-
rioration, cracks, or damage. Replace any
damaged parts.

DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCEDO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
6-4
G030B02A
G030C01A-AAT
To Check the Oil Level To Check the Oil LevelTo Check the Oil Level To Check the Oil Level
To Check the Oil Level
G030D01A-AAT
Adding Oil Adding OilAdding Oil Adding Oil
Adding Oil
Wait a minute, then remove the dipstick, wipe it
off, fully reinsert the dipstick and withdraw it
again. Then note the highest level the oil has
reached on the dipstick. It should be between
the upper ("FULL") and lower ("LOW") range.
If the oil level is close to or below the "LOW"
mark, add oil until it reaches the "FULL" mark.
To add oil:
1. Remove the oil filler cap by turning it counter-
clockwise.
2. Add oil, then check the level again. Do not
overfill.
3. Replace the cap by turning it clockwise.
The distance between the "FULL" and "LOW"
marks is equal to about 1 quart of oil.
G030C01E-1
SH(API) or GF-I (ILSAC) and ABOVE multi-
grade and fuel efficient oil is recommended.
G040A01E-AAT
CHANGING THE OIL AND FILTER CHANGING THE OIL AND FILTERCHANGING THE OIL AND FILTER CHANGING THE OIL AND FILTER
CHANGING THE OIL AND FILTER
The engine oil and filter should be changed at
those intervals specified in the maintenance
schedule in Section 5. If the car is being driven
in severe conditions, more frequent oil and filter
changes are required.
The procedure for changing the oil and filter is
as follows:
1. Park the car on level ground and set the
parking brake. Start the engine and let it
warm up until the needle on the coolant
temperature gauge moves above the lowest
mark. Turn the engine off and place the gear
selector lever in "P" (automatic) or reverse
gear (manual transaxle). Set the parking
brake.
2. Open the hood and remove the engine oil
filler cap.
SSA6040A
Oil filler cap
Drain plug
Oil filter 2.0L SULEV
Before checking the oil, warm up the engine to
the normal operating temperature and be sure
your car is parked on level ground. Turn the
engine off.
G030D01S

DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCEDO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
6-6
Ambient
temperature
°C ( °F)
G050C01A-AAT
To Check the Coolant Level To Check the Coolant LevelTo Check the Coolant Level To Check the Coolant Level
To Check the Coolant Level
The coolant level can be seen on the side of the
plastic coolant reservoir. The level of the cool-
ant should be between the "LOW" and "FULL"
lines on the reservoir when the engine is cold.
If the level is below the "LOW" mark, add
engine coolant to bring it up between "LOW"
and "FULL". If the level is low, inspect for
coolant leaks and recheck the fluid level fre-quently. If the level drops again, visit your
Hyundai dealer for an inspection and diagnosis
of the reason.
G050D02A-AAT
To Change the Engine Coolant To Change the Engine CoolantTo Change the Engine Coolant To Change the Engine Coolant
To Change the Engine CoolantThe engine coolant should be changed at those
intervals specified in the vehicle maintenance
schedule in Section 5.
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:Engine coolant can damage the finish of Engine coolant can damage the finish ofEngine coolant can damage the finish of Engine coolant can damage the finish of
Engine coolant can damage the finish of
your car. If you spill engine coolant on the your car. If you spill engine coolant on theyour car. If you spill engine coolant on the your car. If you spill engine coolant on the
your car. If you spill engine coolant on the
car, wash it off thoroughly with clean water. car, wash it off thoroughly with clean water.car, wash it off thoroughly with clean water. car, wash it off thoroughly with clean water.
car, wash it off thoroughly with clean water.
1. Park the car on level ground, set the park-
ing brake and remove the radiator cap when
cool.
2. Be sure your drain receptacle is in place.
Open the drain cock on the radiator. Allow
all the engine coolant to drain from the
cooling system, then securely close the drain
cock.
3. Check Section 9 for the capacity of the
cooling system in your car. Then, following
the manufacturer's directions on the engine
coolant container, add the appropriate quan-
tity of coolant to the radiator.
G050D01E
Engine Coolant concentration
Antifreeze
solutionWater
35%
40%
50%
60% -15 (5)
-25 (-13)
-35 (-31)
-45 (-49)65%
60%
50%
40%
4. Turn the radiator cap counterclockwise with-
out pressing down on it, until it stops. This
relieves any pressure remaining in the cool-
ing system. And remove the radiator cap by
pushing down and turning counterclockwise.
Now fill the radiator with clean demineral-
ized or distilled water. Continue to add clean
demineralized or distilled water in small quan-
tities until the fluid level stays up in the
radiator neck.
G050D03E