dashboard Hyundai Elantra 2006 Owner's Manual

1
FEATURES OF YOUR HYUNDAI
87HEATING AND COOLING CONTROL
B710A01E-GAT
(If Installed)
1. Side Defrost Nozzle
2. Side Ventilator
3. Windshield Defrost Nozzle
4. Center Ventilator B710B01S-AAT CENTER VENTILATOR The center ventilators are located in the middle of the dashboard. The di-rection of air flow from the vents in the center of the dashboard is adjustable. To control the direction of the air flow,move the knob in the center of the vent up-and-down and side-to-side. B710C02HP-AAT SIDE VENTILATOR The side ventilators are located on each side of the dashboard. To changethe direction of the air flow, move the knob in the center of the vent up-and- down and side-to-side. The vents areopened when the vent knob is moved to " " position. The vents are closed when the vent knob is moved to " ".Keep these vents clear of any obstruc- tions.
B710A02E

1FEATURES OF YOUR HYUNDAI
88
B670A01A-AAT Rotary type (If installed) This model has four controls for the heating and cooling system. They are:
1. Air flow control
2. Air intake control
3. Temperature control
4. Fan speed control HXDOM046
B670D01E
B670D01E-AAT Air Flow Control This is used to direct the flow of air. Air can be directed to the floor, dashboardoutlets, or windshield. Five symbols are used to represent Face, Bi-Level, Floor, Floor-Defrost and Defrost airposition.
Face-Level
Selecting the "Face" mode will causeair to be discharged through the face level vents. HXDFL539
HEATING AND VENTILATION
1
2
3
4

1
FEATURES OF YOUR HYUNDAI
101
HXDFL539
B980E01E-GAT Air Flow Control
B980E01E
This is used to direct the flow of air. Air can be directed to the floor, dashboard outlets, or windshield. Four symbols are used to represent Face, Bi-Level,Floor and Floor-Defrost air position. Face-Level
When selecting the "Face" mode, theindicator light will come on, causing air to be discharged through the face level vents.
B980D01Y-AAT Heating and Cooling System Off Press the "OFF" button to stop the operation of the heating and coolingsystem. turning the ignition to the "ON"position if the "AUTO" mode wasused before shutting off the en- gine.
!
CAUTION:
If the windows fog up with the Recir- culation or A.Q.S mode selected, set the air intake control to the Fresh air position or A.Q.S control to "OFF".