start stop button HYUNDAI ELANTRA 2022 User Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2022, Model line: ELANTRA, Model: HYUNDAI ELANTRA 2022Pages: 584, PDF Size: 14.08 MB
Page 104 of 584
Instrument Cluster
4-18
High Beam Assist indicator
light (if equipped)
This indicator light illuminates:
[ When the High Beam is on with the
light switch in the AUTO light position.
[ If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
system will switch the high beam to
low beam automatically.
For more information, refer to "High
Beam Assist (HBA)" in chapter 5.
Forward Collision-Avoidance
Assist Warning Light
(if equipped)
This warning light illuminates:
[ When you set the ignition switch or
Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
[ When there is a malfunction with
FCA. In this case, have your vehicle
inspected by an authorized dealer of
HYUNDAI.
For more information, refer to "Forward
Collision-Avoidance Assist (FCA)" in
chapter 6.
Lane Keep Assist Indicator
Light (if equipped)
This indicator light illuminates:
[ [Green] When you activate the lane
departure warning system by pressing
the Lane Safety button and all of
the system operating conditions are
satisfied.
[ [White] When function operating
conditions are not satisfied or when
the sensor does not detect the lane
line.
[ [Yellow] When there is a malfunction
with Lane Keeping Assist system.
In this case, have your vehicle inspected
by an authorized HYUNDAI dealer.
For more information, refer to "Lane
Keeping Assist (LKA)" in chapter 6.
Cruise Indicator Light
This indicator light illuminates:
[ When the cruise control system is
enabled.
For more details, refer to “Cruise
Control System” in chapter 6.
SPORT Mode Indicator Light
(if equipped)
This indicator light illuminates:
[ When you select “SPORT” mode as
drive mode.
For more details, refer to “Drive Mode
Integrated Control System” in chapter
6.
Page 105 of 584
04
4-19
SMART Mode Indicator Light
(if equipped)00360030002400350037
This indicator light illuminates:
[ When you select ‘’SMART” mode as
drive mode.
For more details, refer to “Drive Mode
Integrated Control System’’ in chapter
6.
Icy Road Warning Light (if
equipped)
This indicator light illuminates:
This warning light is to warn the driver
the road may be icy.
When the temperature on the outside
temperature gauge is approximately
below 40°F (4°C), the Icy Road Warning
Light and Outside Temperature Gauge
blinks and then illuminates. Also, the
warning chime sounds 1 time.
The Icy Road Warning function can be
activated or deactivated from the User
Settings mode in the cluster LCD display.
Information
If the icy road warning light appears while
driving, you should drive more attentively
and safely, refraining from over-speeding,
rapid acceleration, sudden braking or
sharp turning, etc.
LCD Display Messages
Shift to P or N to start engine
(for smart key system)
This warning message is displayed if
you try to start the engine with the shift
button not in the P (Park) or N (Neutral)
position.
Information
You can start the engine with the shift
button in the N (Neutral) position. But, for
your safety, we recommend that you start
the engine with the shift button in the P
(Park) position.
Shift to P (for smart key system and
intelligent variable transmission)
This message is displayed if you try to
turn off the engine without the shift
button in P (Park) position.
If this occurs, the Engine Start/Stop
button turns to the ACC position (If you
press the Engine Start/Stop button once
more, it will turn to the ON position).
Low key battery
(for smart key system)
This warning message is displayed if the
battery of the smart key is discharged
while changing the Engine Start/Stop
button to the OFF position.
Press brake pedal to start engine
(for smart key system and intelligent
variable transmission)
This warning message is displayed if the
Engine Start/Stop button changes to
the ACC position twice by pressing the
button repeatedly without depressing
the brake pedal.
You can start the vehicle by depressing
the brake pedal and then pressing the
Engine Start/Stop button.
Page 106 of 584
Instrument Cluster
4-20
Press clutch pedal to start engine
(for smart key system and manual
transmission)
This warning message is displayed if the
Engine Start/Stop button is in the ACC
position twice by pressing the button
repeatedly without depressing the clutch
pedal.
Depress the clutch pedal to start the
engine.
Key not in vehicle
(for smart key system)
This warning message is displayed if the
smart key is not in the vehicle when you
press the Engine Start/Stop button.
When attempting to start the vehicle,
always have the smart key with you.
Key not detected
(for smart key system)
This warning message is displayed if the
smart key is not detected when you press
the Engine Start/Stop button.
Press START button again
(for smart key system)
This message is displayed if you were
unable to start the vehicle when the
Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine
by pressing the Engine Start/Stop button
again.
If the warning message appears each
time you press the Engine Start/Stop
button, have your vehicle inspected by
an authorized HYUNDAI dealer.
Battery discharging due to external
electrical devices (if equipped)
This message is displayed if the battery
voltage is weak due to any non-factory
electrical accessories (ex. dashboard
camera) while parking. Be careful that
the battery is not discharged.
If the warning message appears after
removing the non-factory electrical
accessories, have the vehicle inspected
by an authorized HYUNDAI dealer.
Press START button with key
(for smart key system)
This warning message is displayed if you
press the Engine Start/Stop button while
the warning message "Key not detected"
is displayed.
At this time, the immobilizer indicator
light blinks.
Check BRAKE SWITCH fuse (for
smart key system and automatic
transmission/intelligent variable
transmission)
This warning message is displayed if the
brake switch fuse is disconnected.
You need to replace the fuse with a new
one before starting the engine.
If that is not possible, you can start the
engine by pressing the Engine Start/
Stop button for 10 seconds in the ACC
position.
Page 118 of 584
Instrument Cluster
4-32
2. Door
Items Explanation
Auto Lock[ Enable on Shift: All doors will be automatically locked if the shift
lever is moved from the P (Park) position to the R (Reverse), N
(Neutral), or D (Drive) position. (Only when the engine is running)
[ Enable on Speed: All doors will be automatically locked when the
vehicle speed exceeds 15km/h (9.3mph).
[ Disable : The auto door lock operation will be deactivated.
Auto Unlock[ On Shift to P: All doors will be automatically unlocked if the shift
lever is moved to P (Park) position. (Only when the engine is
running)
[ On key out/Vehicle Off : All doors will be automatically
unlockedwhen the ignition key is removed from the ignition switch
or the Engine Start/Stop button is set to the OFF position.
[ Disable : The auto door unlock operation will be canceled.
Two Press
Unlock
[ Off: The two press unlock function will be deactivated. Therefore, all
doors will unlock if the door unlock button is pressed.
[ On: Only the driver’s door will unlock if the door unlock button is
pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
Horn
Feedback
To activate or deactivate the horn feedback.
If the horn feedback is activated, after locking the door by pressing the
lock button on the remote key, and pressing it again within 4 seconds,
the horn feedback sound will operate once to indicate that all doors
are locked (if equipped with remote key).
Smart TrunkTo activate or deactivate the smart trunk.
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items Explanation
IlluminationTo adjust the illumination level.
- Level 1~20
One Touch
Turn Signal[ Off: The one touch turn signal function will be deactivated.
[ 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight
Delay[ To activate or deactivate the headlamp delay function.
For more details, refer to “Lighting” in chapter 5.
High Beam
Assist[ To activate or deactivate the High Beam Assist function.
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
Page 123 of 584
04
4-37
Manual reset
To clear the average fuel economy
manually, press the OK button on the
steering wheel for more than 1 second
when the average fuel economy is
displayed.
Automatic reset
To automatically reset the average fuel
economy after refueling, select the "Fuel
Econ. Reset" mode in the User Settings
menu on the LCD display.
- After Ignition: When the engine has
been OFF for 4 hours or longer the
average fuel economy will reset
automatically.
- After Refueling: The average fuel
economy will reset automatically after
adding 1.6 gallons (6 liters) of fuel or
more and after driving speed exceeds
1 mph (1 km/h).
Information
The vehicle must be driven for a minimum
of 0.19 miles (300 meters) since the last
ignition key cycle before the average fuel
economy will be recalculated.
Instant Fuel Economy (2)
The instantaneous fuel economy is
displayed according to the bar graph in
the LCD display while driving.
Accumulated Info display
OCN7040085N
This display shows the accumulated trip
distance (1), the average fuel economy
(2), and the total driving time (3).
The information is accumulated starting
from the last reset.
To reset the information, press and
hold the OK button when viewing the
Accumulated driving info. The trip
distance, the average fuel economy,
and total driving time will reset
simultaneously.
The accumulated driving information will
continue to be counted while the engine
is still running (EX: when the vehicle is in
traffic or stopped at a stop light).
Information
The vehicle must be driven for a minimum
of 300 meters (0.19 miles) since the last
ignition key cycle before the average fuel
economy will be recalculated.
Page 133 of 584
04
4-47
2. Door
Items Explanation
Auto Lock[ Enable on Shift: All doors will be automatically locked if the shift
lever is moved from the P (Park) position to the R (Reverse), N
(Neutral), or D (Drive) position. (Only when the engine is running)
[ Enable on Speed: All doors will be automatically locked when the
vehicle speed exceeds 15km/h (9.3mph).
[ Disable : The auto door lock operation will be deactivated.
Auto Unlock[ On Shift to P: All doors will be automatically unlocked if the shift
lever is moved to P (Park) position. (Only when the engine is
running)
[ On key out/Vehicle Off : All doors will be automatically
unlockedwhen the ignition key is removed from the ignition switch
or the Engine Start/Stop button is set to the OFF position.
[ Disable : The auto door unlock operation will be canceled.
Two Press
Unlock
[ Off: The two press unlock function will be deactivated. Therefore, all
doors will unlock if the door unlock button is pressed.
[ On: Only the driver’s door will unlock if the door unlock button is
pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
Horn
Feedback
To activate or deactivate the horn feedback.
If the horn feedback is activated, after locking the door by pressing the
lock button on the remote key, and pressing it again within 4 seconds,
the horn feedback sound will operate once to indicate that all doors
are locked (if equipped with remote key).
Smart TrunkTo activate or deactivate the smart trunk.
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items Explanation
IlluminationTo adjust the illumination level.
- Level 1~20
One Touch
Turn Signal[ Off: The one touch turn signal function will be deactivated.
[ 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight
Delay[ To activate or deactivate the headlamp delay function.
For more details, refer to “Lighting” in chapter 5.
High Beam
Assist[ To activate or deactivate the High Beam Assist function.
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
Page 144 of 584
Convenient Features
5-8
Locking your vehicle
(Touch sensor type) (if equipped)
OCN7050092NOCN7050092N
1. Close all doors, engine hood and
trunk.
2. Carry the smart key.
3. Either touch the touch sensor on the
door handle (the engraved part) or
press the Door Lock button (1) on the
smart key.
4. The hazard warning lights will blink.
5. Make sure the doors are locked by
pulling the door outside handle.
Information
• 7 K H G R R U K D Q G O H E X W W R Q Z L O O R Q O \
R S H U D W H Z K H Q W K H V P D U W N H \ L V Z L W K L Q
a L Q F K H V a P I U R P W K H R X W V L G H
G R R U K D Q G O H
• , I \ R X O R F N H G W K H G R R U Z L W K W K H W R X F K
V H Q V R U R Q W K H G R R U K D Q G O H W K H G R R U V
F D Q Q R W E H X Q O R F N H G Z L W K W K H V H Q V R U
Z L W K L Q V H F R Q G V
Information
( Y H Q W K R X J K \ R X S U H V V W K H R X W V L G H G R R U
K D Q G O H E X W W R Q R U W R X F K W K H W R X F K V H Q V R U
W K H G R R U V Z L O O Q R W E H O R F N H G D Q G W K H F K L P H
Z L O O V R X Q G I R U V H F R Q G V L I D Q \ R I W K H
I R O O R Z L Q J R F F X U V
• 7 K H 6 P D U W . H \ L V L Q W K H Y H K L F O H
• 7 K H ( Q J L Q H 6 W D U W 6 W R S E X W W R Q L V L Q $ & &
R U 2 1 S R V L W L R Q
• $ Q \ G R R U H [ F H S W W K H W U X Q N L V R S H Q H G
CAUTION
When you leave your vehicle with
the smart key, make sure to press the
button on the front door handle or
touch the touch sensor on the front
door handle to lock the doors after
closing all of the doors, the hood and
the trunk. If you do not press the button
or touch the touch sensor firmly, the
doors might not be locked so please use
caution.
WARNING
Do not leave the Smart Key in your
vehicle with unsupervised children.
Unattended children could press the
Engine Start/ Stop button and may
operate power windows or other
controls, or even make the vehicle
move, which could result in serious
injury or death.
CN7 HMA 5.indd 5-82020-12-03 9:20:42
Page 147 of 584
05
5-11
Remote start (if equipped)
You can start the engine and turn on the
climate system by pressing the remote
start button (5) outside the vehicle.
To start and stop engine remotely :
1. Press the door lock button (1), and
then the hazard warning lights blink
once to alert you.
2. Press the Remote Start button (5)
for more than 2 seconds to start the
engine within 4 seconds after pressing
the door lock button (1).
3. If you want to stop the engine, press
the Remote Start button (5) again.
In case of the manual operation,
the climate control system will be
maintained even when the engine is
turned OFF. However, the automatic
operation is set to 72°F (22°C).
If someone without a designated smart
key attempts to drive your vehicle after
you remotely started it, the engine will
be stopped.
Information
$ I W H U U H P R W H O \ V W D U W L Q J W K H Y H K L F O H W K H
H Q J L Q H Z L O O W X U Q R I I D I W H U P L Q X W H V L I W K H
Y H K L F O H L V Q R W G U L Y H Q
CAUTION
• The remote start will not work if you
exceed the operating distance limit
(about 10 m).
• Avoid idling the engine for prolonged
periods to follow the emission
regulations in your locality.
• Laws in your locality may restrict the
use of remote start. You should check
locality regulations before using this
remote starting system.
• It is only possible to start the engine
remotely when shifted to P (Park).
• If the hood or the trunk is opened,
you cannot start the engine
remotely.
CN7 HMA 5.indd 5-112020-12-03 9:20:43
Page 148 of 584
Convenient Features
5-12
Start-up
You can start the engine without
inserting the key. For detailed
information refer to the Engine Start/
Stop button in chapter 6.
Information
, I W K H V P D U W N H \ L V Q R W P R Y H G I R U V R P H
W L P H W K H G H W H F W L R Q I X Q F W L R Q I R U V P D U W N H \
R S H U D W L R Q Z L O O S D X V H / L I W W K H V P D U W N H \ W R
D F W L Y D W H W K H G H W H F W L R Q D J D L Q
NOTICE
To prevent damaging the smart key:
• Keep the smart key away from water
or any liquid and fire. If the inside
of the smart key gets damp (due to
drinks or moisture), or is heated,
internal circuit may malfunction and
may void the vehicle warranty.
• Avoid dropping or throwing the
smart key.
• Protect the smart key from extreme
temperatures.
NOTICE
Always have the smart key with you
when leaving the vehicle. If the smart
key is left near the vehicle, the vehicle
battery may be discharged.
Mechanical key
If the Smart Key does not operate
normally, you can lock or unlock the
driver’s door by using the mechanical
key.
OCN7050008OCN7050008
Press and hold the release button (1) and
remove the mechanical key (2). Insert the
mechanical key into the key hole on the
door.
To reinstall the mechanical key, put the
key into the hole and push it until a click
sound is heard.
Loss of a smart key
A maximum of two Smart Keys can be
registered to a single vehicle. If you
happen to lose your smart key, you
should immediately take the vehicle
and remaining keys to your authorized
HYUNDAI dealer or tow the vehicle, if
necessary.
Smart key precautions
The smart key may not work if any of the
following occur:
• The smart key is close to a radio
transmitter such as a radio station or
an airport which can interfere with
normal operation of the transmitter.
• The smart key is near a mobile two
way radio system or a cellular phone.
• Another vehicle’s smart key is being
operated close to your vehicle.
CN7 HMA 5.indd 5-122020-12-03 9:20:43
Page 155 of 584
![HYUNDAI ELANTRA 2022 User Guide 05
5-19
6 W D U W X S Z L W K L J L W D O . H \
1. After placing your registered
smartphone onto the interior
authentication pad (wireless charger),
step on the brake and press the
Eng](/img/35/41167/w960_41167-154.png "HYUNDAI ELANTRA 2022 User Guide 05
5-19
6 W D U W X S Z L W K L J L W D O . H \
1. After placing your registered
smartphone onto the interior
authentication pad (wireless charger),
step on the brake and press the
Eng")
05
5-19
6 W D U W X S Z L W K ' L J L W D O . H \
1. After placing your registered
smartphone onto the interior
authentication pad (wireless charger),
step on the brake and press the
Engine Start/Stop button.
2. After start-up, the digital key data
will be automatically updated. It
takes 5 to 20 seconds, after that, the
smartphone will go into the wireless
charging mode automatically. Once
the engine is started, you may remove
the smartphone from the pad.
OCN7050070OCN7050070
[A] : Wireless Charging Pad (In-vehicle Authentication
Pad)
Information
$ I W H U U H F R Q Q H F W L Q J W K H Y H K L F O H E D W W H U \
S R Z H U V X S S O \ R U F K D U J L Q J W K H E D W W H U \ L W
P D \ W D N H W L P H W R R S H U D W H G X H W R U H P R W H
U H Q H Z D O R I V H F X U L W \ L Q I R U P D W L R Q : K H Q \ R X
O R F N R U X Q O R F N W K H G R R U Z L W K 1 ) & S O H D V H
W R X F K D Q G K R O G \ R X U V P D U W S K R Q H R Q W K H
G R R U K D Q G O H X Q W L O L W Z R U N V
: K H Q W K H P R E L O H G D W D F R Q Q H F W L R Q R I W K H
V P D U W S K R Q H L V Z H D N W K H U H P R W H U H Q H Z D O
R I V H F X U L W \ L Q I R U P D W L R Q P D \ I D L O , Q W K L V
F D V H \ R X V K R X O G O R F N X Q O R F N R U W X U Q R Q
W K H Y H K L F O H Z L W K W K H F D U G N H \ : K H Q \ R X
D U H L Q W K H S O D F H Z K H U H W K H P R E L O H G D W D
F R Q Q H F W L R Q R I \ R X U V P D U W S K R Q H L V D Y D L O D E O H
D Q G S O D F H \ R X U V P D U W S K R Q H R Q W K H L Q W H U L R U
D X W K H Q W L F D W L R Q S D G Z L U H O H V V F K D U J H U D Q G
V W D U W X S \ R X U Y H K L F O H R U W R X F K W K H G L J L W D O
N H \ R Q W K H G R R U K D Q G O H W R O R F N R U X Q O R F N
W K H G R R U W K H U H P R W H U H Q H Z D O R I V H F X U L W \
L Q I R U P D W L R Q V W D U W V D X W R P D W L F D O O \ ( Y H Q
W K R X J K W K H H Q J L Q H L V W X U Q H G R Q S O H D V H
Z D L W X Q W L O W K H U H P R W H U H Q H Z D O S U R F H V V
L V F R P S O H W H G D Q G Z L U H O H V V F K D U J H U L V
F R Q Y H U W H G W R F K D U J L Q J P R G H
CAUTION
The engine can be turned on if the
registered smartphone or card key is
placed on the interior authentication
pad (wireless charger). Do not leave
unsupervised children or people who
are not aware of the system since it
can result in serious injury or death.
Always have the registered digital key
(smartphone) or card key with you to
prevent vehicle theft when leaving the
vehicle.
For more information, refer to the
Engine Start/Stop button in chapter 6.
CN7 HMA 5.indd 5-192020-12-03 9:20:44