ECO mode Hyundai Elantra GT 2018 Quick Reference Guide

Steering wheel
audio controlPage24
Instrument
clusterPage17
NavigationPage31-32
Instrument
panel lillumination Page18
Climate
controlPage20-23
HeadlightsPage09
Table of contents
Cruise control/
Smart cruise controlPage42
Wiper and
washerPage10
TransmissionPage36

WARNING!
To reduce the risk of serious injury to yourself and others,
read and understand the important SAFETY INFORMATION
in your Owner’s Manual.
* Some vehicles may not be equipped
with all the listed features.
Use this Quick Reference Guide to learn
about the features that will enhance your
enjoyment of your Hyundai. More detailed
information about these features are
available in your Owner’s Manual.
Driver's main
controlsPage08
GETTING STARTEDCentral door lock/ unlock switch 02
Child-protector rear door lock 03
Emergency manual door lock 02
Engine start/stop button 07
Front seat adjustment (manual) 05
Front seat adjustment (power) 05
Fuel filler door 03
Head restraint adjustment 06
Inner door handle 02
Liftgate 03
Rear seat folding 06
Remote & smart key 04
Seat belt adjustment (front seat) 06
Steering wheel adjustments 07FEATURES AND CONTROLSAir ventilation seat (front seat) 13
Climate control 20-23
Clock adjustment 16
Driver’s main controls 08
Headlights 09
Homelink wireless control system 14
Instrument cluster 17
Instrument panel illumination 18
Interior lights 12
LCD display control 19
LCD display modes 19
Rear view camera 15
Seat warmer (front seats) 13
Sunroof 11
Warning and indicators 18
Wireless cellular phone charging system 15
Wipers and washer 10 MULTIMEDIAAUX, USB and iPod® port 32
Blue link telematics system 28-30
Bluetooth® phone call operational tips 24-25
Bluetooth® phone operation 2 7
Navigation 31-32
Steering wheel audio control 24
Voice recognition tips 26DRIVINGAuto hold 33
Automatic emergency braking (AEB) 39
Automatic transmission &
Dual clutch transmission 36
Blind spot detection system (BSD) 39Cruise control/advanced smart cruise control
42
Driver attention alert system 40
Drive mode integrated control system 41
Electronic parking brake (EPB) 33
Electronic stability control (ESC) 38
Lane keeping assist system (LKAS) 38
Manual transmission 35
Tire pressure monitoring system (TPMS) 34
Paddle shifter 37

Quick Reference Guide I 07
06 I Quick Reference Guide
Elantra GT HYUNDAI
GETTING STARTED
Pull up to raise.Press button and
push down to lower.
SEAT BELT ADJUSTMENT (Front seat) HEAD RESTRAINT ADJUSTMENT
To Raise the Head Restraint:

Pull headrest up.
To Lower the Head Restraint:

Press lock button while pressing
down on headrest.
With the ignition OFF and foot OFF
of brake pedal, press the Engine
Start / Stop button.• Once for ACC (Accessory) mode.• Twice for ON mode.• Third for OFF.
ENGINE START / STOP BUTTON To start the engine in any mode (including OFF), press the Engine Start / Stop
button while pressing down on the brake pedal (and clutch pedal for the
manual transmission).
To turn off the engine, place the shift lever in P (Park) and press
the Engine Start / Stop button.Emergency Situations To turn the engine off while moving Press the Engine Start / Stop button for more than 2 seconds or 3 times
consecutively within 3 seconds.To restart the engine while movingPress the Engine Start / Stop button with the shift lever in N (Neutral).
REAR SEAT FOLDING
1. Pull the lever
1 down.
2. Set the angle 2 and distance
3.
3. Pull the lever
1 up to lock position.
NOTE:
Do not adjust while driving.
STEERING WHEEL ADJUSTMENTS
1
2
3

Quick Reference Guide I 19
18 I Quick Reference Guide
Elantra GT HYUNDAI
WARNINGS AND INDICATORS
Automatic Emergency
Braking (AEB) warning
light
Air bag warning light
Seat belt
warning light
Anti-lock Brake
System (ABS)
warning light
Electronic Brake force Distribution (EBD)
System warning light
Electric Power Steering
(EPS) warning lightMaster warning lightElectronic Stability
Control (ESC)
Indicator Light
Electronic Stability
Control (ESC) OFF
indicator light
Immobilizer indicator
Turn signal indicator
light
High beam indicator
light
Exterior light warning
light
Light ON indicator
light
Cruise indicator
Cruise SET indicator
SPORT mode
indicator
Washer fluid warning
light (if equipped)
Charging system
warning light
Engine oil pressure
warning light
Malfunction Indicator
Lamp (MIL)
Low tire pressure
warning light / TPMS
malfunction
Low fuel level
warning light
FEATURES AND CONTROLS
Press the illumination control button
to adjust the instrument cluster
illumination brightness.
INSTRUMENT PANEL ILLUMINATION
1 : MODE button for changing
modes2 : MOVE switch for changing
items3 : SELECT / RESET button for
setting or resetting the
selected item
LCD DISPLAY CONTROL
Type B Type A
3
2
2
1
1LCD DISPLAY MODES
Modes Symbol ExplanationTrip ComputerThis mode displays driving information such
as the tripmeter, fuel economy, etc.
Turn By Turn (TBT)
(if equipped)This mode displays the state of the
navigation.
AssistThis mode displays the state of :
- Lane Keeping Assist System (LKAS)
- Advanced Smart Cruise Control
- Driver Attention Alert (DAA)
- Tire Pressure
User SettingsIn this mode, you can change settings of
the doors, lamps, etc.
WarningThis mode displays warning messages related
to the Blind Spot Detection system, etc.
Parking brake & brake
fluid warning lightLane Keeping Assist
System (LKAS) Indicator
Smart high beam
indicatorElectric Parking Brake
(EPB) warning light
AUTO HOLD indicatorIcy road warning
light
3

Quick Reference Guide I 25
24 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
1 VOICE RECOGNITION

Activates the voice recognition
system.
2 SEEK / PRESET ( / ) Changes station.3 MODE Changes the audio source.4 VOLUME (VOL + / -
) Increase or decrease the volume.
Press to Mute.
Making a call using voice recognition:
Press
button on the steering
wheel control to activate voice
recognition.
Press and hold
button to end
voice recognition.
Calling by Name:
1. Press the
button.
2. Say the following command:
• “Call ”: Connects the call to John.
• “ Call on Other>”: Connects the call to John’s Mobile, Work, Home, or
Other phone number.
Dialing by Number:
1. Press the button.
2. Say “Dial Number.”
3. Say the desired phone number.
For the complete list of commands, refer to your Owner’s Manual. To Answer a Call:
• Press the button on the steering wheel.
To Reject a Call:
• Press the button on the steering wheel.
To Adjust Ring Volume:
• Use the VOLUME buttons on the steering wheel while it is ringing.
To Transfer a Call to the Phone
(Private call on handset – do not use while driving):
• Press and hold the
button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call:
• Press the
button on the steering wheel.
In the following situations you or the other party may have difficulty
hearing each other:
1. Keep the Bluetooth®
volume to a low level. High level volume may
result in distortion and echo.
2. When driving on a rough road, high speeds and/or with the window
open.
3. When the air conditioning vents are facing the microphone and/or
when the air conditioning fan is at the max speed.
Steering wheel bluetooth
® control
1 CALL Places and transfers calls.2 END Ends calls or cancels functions.
BLUETOOTH
® PHONE CALL OPERATIONAL TIPS
2
1
23
14STEERING WHEEL AUDIO CONTROL Position, tone, priority and advanced sound settings can be customized
in the audio/ navigation unit. Press the SETUP
button then select
Sound.

Quick Reference Guide I 31
30 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
Preconditions: • Ignition is OFF
• Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock)
• Gearshift level is in the P (Park) position
• Brake pedal is not depressed
• Engine hood is securely closed
• All the doors are closed and locked
• The tailgate or trunk lid is closed
• The security/panic system is not activated
• The proximity key is not inside the vehicle
• The battery power is not low
• Vehicle is located in an open area
• It has been less than 4 days since last vehicle ignition off
• Vehicle located in area with good cell receptionRemote Start will terminate: • After 10 minutes or after selected engine timer runs out in navigation
vehicles
• Brake is pressed without proximity key inside vehicle
• Alarm is triggered without proximity key inside vehicle
• Door/trunk is opened from inside the vehicleNotice: Laws in some communities may restrict the use of the
features that remotely start the engine. For example, some laws may
require a person using the remote start feature to have the vehicle in
view when doing so or limit the length of time a vehicle engine may
idle. Please check local and state regulations for any requirements
and restrictions on remote starting of vehicles and engine idling time.
WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a
motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon
monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches,
dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals
unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn
on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice
or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when
parking the vehicle.
Basic features on map screen1 Place button : Go to the Place menu.2 Home button : Go to the Home screen.3 Map button : Change the map view mode.4 NAV volume button : Adjusts the volume.5 Zoom in button : Zoom the map view screen in.6 Map scale display : Set the zoom level automatically according
to the guidance.7 Zoom out button : Zoom the map view screen out.8 Quick menu button : Quick menu for destination selection and options.9 Map scroll mark : Touch to scroll the map.10 Guidance button : Start the preferred navigation route to
selected location.
11 Routes : Choose the preferred navigation route to selected location.12 Waypoint button : Set a waypoint to the current route.13 Save button : Save frequently used address to address book.14 POI button : Find a POI(Point Of Interest) around the current position.15 Vehicle position mark : View the vehicle’s current position on
the map screen.
15
11
10
12
13
14
234
1
567
8
9
NAVIGATION

Quick Reference Guide I 37
36 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
(
) :
Depress the brake pedal and press the shift button while moving the shift lever.
(
) : Press the shift button while moving the shift lever.
() : The shift lever can freely operate.
Move the shift lever from D (Drive) into the manual gate to select.
Move the shift lever forward (+) to up shift or rearward (−) to downshiftManual shift modeNOTE:
Dual Clutch Transmission (DCT) characteristics
The technology of the Dual Clutch Transmission is different from a
traditional automatic transmission:
• The DCT can be thought of as an automatically shifting manual
transmission. It gives the driving feel of a manual transmission, yet
provides the ease of a fully automatic transmission.
• When you turn the engine on and off, you may hear clicking sounds as
the system goes through a self test.
This is a normal sound for the DCT.
AUTOMATIC TRANSMISSION &
DUAL CLUTCH TRANSMISSION (DCT)
• When you stop on a hill, if you remove your foot from the brake pedal,
the vehicle will remain stationary for approximately two seconds to
prevent the vehicle from rolling backwards. If you depress the
accelerator pedal during the two second interval, the vehicle will
accelerate.
If you wait more than two seconds, the vehicle will enter creep mode
and may roll backwards if the hill is steep.
• Engage AUTO HOLD in hilly areas to eliminate vehicle creep or roll
back.Caution• You should always use the foot brake or AUTO HOLD to hold the car
on a hill until you are ready to drive. Using creep mode to hold the car
on a hill may damage the clutch.
• If the clutch becomes overheated by excessive use of the clutch to hold
on a hill, you may notice a shudder feeling and a blinking display on
the instrument cluster. When this occurs, the clutch is disabled until the
clutch cools to normal temperatures. If this occurs, pull over to a safe
location, shift into P (Park) and apply the foot brake for a few minutes.PADDLE SHIFTER
The paddle shifter is available when the shift lever is
in the D (Drive) position or the manual shift mode.
Pull the [+] or [-] paddle shifter once to shift up or
down one gear.
Move the shift lever from manual shift mode back
to D (Drive) to return to automatic shift mode.
Press (-) to
downshiftPress (+) to
upshift

Quick Reference Guide I 41
40 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
The Driver Attention Alert (DAA) system
displays the condition of the driver's fatigue
level and inattentive driving practices. The DAA
system monitors the lane markers and driver's
inputs to the steering wheel, accelerator pedal
and brake pedal.
To turn ON the Driver Attention Alert system,
turn on the engine, and then select
‘User Settings
Driving Assist

Driver Attention Alert
Normal / Early’
on the LCD Display.
The Driver Attention Alert system is operable when driving over 40mph.
The system can be reset when the driver turns the engine OFF.
For more detailed information on any of these topics, please refer to
Section 5 of the Owner's Manual.
DRIVER ATTENTION ALERT SYSTEM
The drive mode may be selected
according to the driver's preference
or road condition. The system resets
to NORMAL mode every time the
engine is restarted.
Each time you press the button, the
drive mode changes as following :
Normal mode provides regular daily driving performance with some
fuel efficiency. When Normal mode is selected, it is not displayed on
the instrument cluster.NORMAL modeSport mode focuses on enhanced driving dynamics by adjusting the
steering feel along with the responsiveness of the engine and
transmission. In Sport mode, the fuel efficiency may decrease.SPORT mode
NORMAL

SPORT
To improve your fuel efficiency:• Drive smoothly and accelerate at a moderate rate.
• Avoid heavy accelerations.
• Maintain steady cruising speed.
• Adjust the vehicle speed to the traffic condition and avoid speed changes.
• Avoid unnecessary braking.
• Keep the tires inflated to the recommended tire pressure.
• Do not idle the engine longer than necessary. DRIVE MODE INTEGRATED CONTROL SYSTEM