turn signal Hyundai Elantra GT 2018 Quick Reference Guide

Quick Reference Guide I 09
08 I Quick Reference Guide
Elantra GT HYUNDAI
FEATURES AND CONTROLS
DRIVER'S MAIN CONTROLS
Side view mirror • Press the L or R button. • Adjust the mirror by using
the directional switch.Power window lock buttonDisables the power window
switches on the rear passenger
doors. Window switches• Front doors power window
switches.• Rear doors power window
switches.
Headlight DelayHeadlights may stay on for 15 seconds after exiting and locking vehicle.
Press the lock button on the remote key or smart key twice to turn the
headlights off.Turn signals and lane change
signalsFlashing headlights
PULL
High beams Smart High Beam
Smart High Beam Function
PUSH PUSH
NOTE:
To turn off the high beam, pull the lever towards you.
Parking lights onDRL OFFAuto headlights onHeadlights on
HEADLIGHTS1. Select the AUTO position on stalk.
2. Push the lever forward to engage the Smart High beam.
3. Pull the lever towards you to disengage.

Quick Reference Guide I 19
18 I Quick Reference Guide
Elantra GT HYUNDAI
WARNINGS AND INDICATORS
Automatic Emergency
Braking (AEB) warning
light
Air bag warning light
Seat belt
warning light
Anti-lock Brake
System (ABS)
warning light
Electronic Brake force Distribution (EBD)
System warning light
Electric Power Steering
(EPS) warning lightMaster warning lightElectronic Stability
Control (ESC)
Indicator Light
Electronic Stability
Control (ESC) OFF
indicator light
Immobilizer indicator
Turn signal indicator
light
High beam indicator
light
Exterior light warning
light
Light ON indicator
light
Cruise indicator
Cruise SET indicator
SPORT mode
indicator
Washer fluid warning
light (if equipped)
Charging system
warning light
Engine oil pressure
warning light
Malfunction Indicator
Lamp (MIL)
Low tire pressure
warning light / TPMS
malfunction
Low fuel level
warning light
FEATURES AND CONTROLS
Press the illumination control button
to adjust the instrument cluster
illumination brightness.
INSTRUMENT PANEL ILLUMINATION
1 : MODE button for changing
modes2 : MOVE switch for changing
items3 : SELECT / RESET button for
setting or resetting the
selected item
LCD DISPLAY CONTROL
Type B Type A
3
2
2
1
1LCD DISPLAY MODES
Modes Symbol ExplanationTrip ComputerThis mode displays driving information such
as the tripmeter, fuel economy, etc.
Turn By Turn (TBT)
(if equipped)This mode displays the state of the
navigation.
AssistThis mode displays the state of :
- Lane Keeping Assist System (LKAS)
- Advanced Smart Cruise Control
- Driver Attention Alert (DAA)
- Tire Pressure
User SettingsIn this mode, you can change settings of
the doors, lamps, etc.
WarningThis mode displays warning messages related
to the Blind Spot Detection system, etc.
Parking brake & brake
fluid warning lightLane Keeping Assist
System (LKAS) Indicator
Smart high beam
indicatorElectric Parking Brake
(EPB) warning light
AUTO HOLD indicatorIcy road warning
light
3

Quick Reference Guide I 39
38 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
ESC automatically selects the ON
position when the engine is started.To turn off Traction ControlPress the ESC OFF button once.To turn off Traction & Stability
ControlPress the ESC OFF button for more
than 3 seconds.The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.
LANE KEEPING ASSIST SYSTEM (LKAS)
The Lane Keeping Assist System
detects lane markers on the road,
and assist the driver's steering to
help keep the vehicle between lanes.
• To turn on the LKAS, press the
LKAS switch.
• To turn off the LKAS, press the
switch again.
LKAS opearates only while the
vehicle speed is over 40mph and
below 110mph.
For more detailed information, please
refer to Section 5 of the Owner's
Manual.
ELECTRONIC STABILITY CONTROL (ESC)
2
The Blind Spot Detection system uses
radar sensors to monitor and warn the
driver of an approaching vehicle in the
driver's blind spot area.1 Blind Spot Detection (BSD)2 Lane Change Assist (LCA)3 Rear Cross Traffic Alert (RCTA)
• To turn on the BSD, press the BSD
button (indicator illuminated).
• BSD and LCA operate in D (Drive)
over appx. 20mph.
• RCTA operates in R (Reverse)
under appx. 6mph.
• To turn off the BSD, press the BSD
button again.
When the vehicle is in R (Reverse), the system provides an alert if a
vehicle or pedestrian is approaching from the sides.Rear Cross Traffic Alert
3
1AUTOMATIC EMERGENCY BRAKING (AEB)The Automatic Emergency Braking (AEB) system is designed to help
detect and monitor the vehicle ahead or detect a pedestrian in the
roadway through radar signals and camera recognition to warn the
driver that a collision is imminent, and if necessary, apply emergency
braking.To activate or deactivate the AEB system, select or deselect:
“User Settings
Driving Assist
Automatic Emergency Braking”
The AEB deactivates when system setting is deselected. A warning
light
will illuminate on the LCD display when the AEB system is
deactivated. Please refer to the Owner’s Manual for more information.
Caution: Do not try to test the AEB system.
BLIND SPOT DETECTION SYSTEM (BSD)