reset infotainment system HYUNDAI ELANTRA N 2022 Owners Manual

04
4-9
Distance to empty
Normal modeNormal modeN modeN mode
OCN7040016NOCN7040016NOOSN041023NOOSN041023N
• The distance to empty is the estimated distance the vehicle can be
driven with the remaining fuel.
• If the estimated distance is below 1 mi. (1 km), the trip computer will
display “---” as distance to empty.
Information
• If the vehicle is not on level ground or
the battery power has been interrupted,
the distance to empty function may not
operate correctly.
• The distance to empty may differ
from the actual driving distance as it
is an estimate of the available driving
distance.
• The trip computer may not register
additional fuel if less than 1.6 gallon (6
liters) of fuel are added to the vehicle.
• The distance to empty may vary
significantly based on driving
conditions, driving habits, and
condition of the vehicle.
Fuel economy (Normal mode)
OCN7N041114NOCN7N041114N
The average fuel economy (1) and instant
fuel economy (2) is displayed at the
bottom of the cluster.
Automatic reset
To automatically reset the average fuel
econom

y, select between "After Ignition“
or "After Refueling" from the Settings
menu in the infotainment system screen.
CUSTOM mode settings
OCN7N041136NOCN7N041136N
The main settings of CUSTOM mode is
displayed at the bottom of the cluster.
The CUSTOM mode can be set on the
infotainment system.
Information
For more details on the CUSTOM mode,
refer to “Drive Mode Integrated Control
System” section in chapter 6.
CN7 N HMA 4.indd 4-9 2021-09-14  9:32:23

Instrument Cluster4-28
OBC3N040026OBC3N040026
OBC3N040027OBC3N040027
Lap timer
(1) Best lap
(2) Curr
ent lap
To start (A)
Press the OK button shortly on the
s
teering wheel. The lap timer will start
counting the current lap (2).
To stop (B)
Press and hold the OK button for more
than 1 second on the s
teering wheel
while the lap timer is counting the
current lap (2).
OBC3N040028OBC3N040028
To reset (C):
Press and hold the OK button for more
than 1 second on the s
teering wheel
when the lap timer has stopped counting
the current lap (2).
To save laps:
Press the OK button shortly on the
s
teering wheel while the lap timer is
counting the current lap (2).
From best lap (1) to No.4 lap (3) will be
displayed.
Press the OK button for more than 1
second on the steering wheel to reset the
lap. Then the driver can start a new lap.
Information
Lap timer can be activated regardless of
the mode settings (Drive mode or N mode).
NOTICE
If the N1(N2) button is set to 'Start
lap timer', the N2(N1) button is
automatically set to 'Stop & Reset lap
timer' from the infotainment system.
Then the driver can operate lap timer
using the N1/N2 buttons as the one pair.
For more details, please refer to the
infotainment system manual separately
supplied.
CN7 N HMA 4.indd 4-28 2021-09-14  9:32:48

04
4-31
User Settings Mode
OCN7040038LOCN7040038L
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver assistance
2. Door
3. Lights
4. Sound
5. Convenience
6. Service interval
7. Theme selection
8. Other
9. Language
10. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.Shift to P to edit settings / Engage parking
brake to edit settings
This warning message illuminates if
y

ou try to select an item from the User
Settings mode while driving.
• Dual clutch transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
• Manual transmission
For your safety, change the User
Settings after engaging the parking
brake.
Quick guide (Help)
This mode provides quick guides for the
s
ystems in the User Settings mode.
Select an item, press and hold the OK
button.
For more details about each system,
refer to this Owner’s Manual.
Information
When the infotainment system is applied,
only the User’s Setting mode on the
infotainment system is supported but the
User’s Setting mode on the instrument
cluster is not supported.
CN7 N HMA 4.indd 4-31 2021-09-14  9:32:56

Convenience Features5-26
Vehicle personalization with digital key
The available personalization function in the vehicle is as follows.
System Personalization Item
USM Air conditioning
Se
tting up temperature unit, Block air inflow/
Automatic ventilation/Window defroster On/Off
Cluster Information display on the cluster, Voice volume,
Welcome sound
Lamp Blink number of one-touch signal lamps
Door Automatic door lock/unlock, Two Press Unlock
Infotainment menu Navigation
Preferred volume of the navigation system
Recent destination
User preset Radio preset, My menu list settings
Air conditioning (for automatic
climate control system) Operating
condition Latest operation setup of the following functions:
Temperature, AUTO, air flow direction, air volume,
air conditioner, air intake control, SYNC, Front
windshield defroster, OFF
For more information of personalization, refer to the infotainment system manual.
The information provided may differ depending on which functions are applicable
to your vehicle.
CAUTION
If you leave the digital key after locking or unlocking the doors or starting up the
vehicle with the smart key, the doors can be locked by the central door lock. Please
carry the digital key at all times.
CN7 N HMA 5.indd 5-26
2021-09-06  3:06:14

05
5-115
Steering Wheel Audio Control
OCN7N051203OCN7N051203
The steering wheel audio control
switches are installed for your
convenience.
NOTICE
Do not operate audio remote control
buttons simultaneously.
VOLUME (VOL + / VOL -) (1)
• Move the VOLUME toggle switch up to increase volume.
• Move the VOLUME toggle switch down to decrease volume.
SEEK/PRESET ( / ) (2)
If the SEEK/PRESET toggle switch is
moved up or down and held for 0.8
second or more, it will function in the
following modes. •
RADIO mode
It will function as the AUTO SEEK
select s

witch. It will SEEK until you
release the switch.
• MEDIA mode
It will function as the FF/REW switch.
If the SEEK/PRESET t

oggle switch is
moved up or down, it will function in
the following modes.
• RADIO mode
It will function as the PRESET STATION
UP/DOWN s

witch.
• MEDIA mode
It will function as the TRACK UP/
DOWN s

witch.
MODE () (3)
Press the MODE button to select Radio.
MUTE () (4)
• Press the button to mute the sound.
• Press the button again to activate the sound.
Custom button () (5)
You can set the function to be executed
by pressing the user button on the
steering wheel. It is convenient to set
frequently used functions as user button
functions.
For detailed information, refer to the
infotainment system manual separately
supplied.
CN7 N HMA 5.indd 5-115 2021-09-06  3:06:51

06
6-11
VEHICLE AUTO-SHUT OFF
If your vehicle is parked and the engine
is left on for a long period of time, the
engine will turn off automatically to help
reduce fuel consumption and prevent
accidents caused by carbon dioxide
poisoning.
Operating Conditions
Vehicle Auto-Shut Off timer operates
when all the following conditions are
satisfied:
• Vehicle speed is below 1.8 mph (3 km/h), and the gear is shifted to P
(Park)
• The brake pedal and accelerator pedal are not depressed
• The driver’s seat belt is unfastened
• The passenger seat is empty
• The infotainment system is being updated
Deactivating Conditions
Vehicle Auto-Shut Off timer turns off
when one of the situation occur:
• Vehicle speed is above 1.8 mph (3 km/h)
• The gear is shifted to R (Reverse), D (Drive) or N (Neutral)
• The brake pedal or accelerator pedal is depressed
• The driver’s seat belt is fastened
• A passenger is in the passenger’s seat
System Operation
OJK041087NOJK041087N
When all the conditions are satisfied, the
Vehicle Auto-Shut Off operates and turns
the engine off automatically after 60
minutes.
A timer appears on the instrument
cluster 30 minutes before vehicle shut
off.
Resetting cluster timer
To reset the cluster timer, do one of
following:
• Release the accelerator pedal or brake pedal after Vehicle Auto-Shut Off is
complete.
• Press the OK button on the steering wheel while the timer appears on the
instrument cluster.
CAUTION
Do not leave a passenger or a pet in
the vehicle in hot weather since the air
conditioning system turns off when the
engine is off.
CN7 N HMA 6.indd 6-11 2021-09-14  9:42:20

06
6-43
N BUTTON
N1/N2 Button Settings
N1 buttonN1 button
OCN7N061208OCN7N061208
N2 buttonN2 button
OCN7N071130L OCN7N071130L N1 button: Left N button,
N2 button: Right N button
The driver can set the N1/N2 button
on the infotainment system screen by
pressing the button approximately 0.8
seconds.
N1 buttonN1 button
OCN7N061230LOCN7N061230L
N2 buttonN2 button
OCN7N061231LOCN7N061231L
Each of the N1/N2 button can be set:
1. N
2. CUSTOM 1
3. CUSTOM 2
4. N  CUSTOM 1
5. N  CUSTOM 2
6. DRIVE MODE
7. Start/Record Lap Timer
8. End/Reset Lap Timer
Information
The same setting can be selected
simultaneously on both N1 and N2 button.
However, if the N1(N2) button is set to
‘(7) Start/Record Lap Timer’, the N2(N1)
button is automatically set to ‘(8) End/
Reset Lap Timer’.
For more details, please refer to the
infotainment system manual separately
supplied.
CN7 N HMA 6.indd 6-43 2021-09-14  9:42:30

Driving Your Vehicle6-44
Drive Mode
Drive mode buttonDrive mode button
OCN7N061254LOCN7N061254L
N1 buttonN1 button
OCN7N061208 OCN7N061208
N2 buttonN2 button
OCN7N071130L OCN7N071130L
Information
If N1 or N2 button is set to ‘Drive mode’
from the infotainment system, the drive
mode can be selected by pressing N1 or N2
button.
For more details, please refer to the
infotainment system manual separately
supplied. The drive mode may be selected
according to the driver’s preference or
road condition.
The system resets to be in the NORMAL
mode, when the engine is restarted.
The mode changes, whenever the N1 or
N2 button on the steering wheel or the
Drive mode button is pressed.
NORMAL
SPORT
ECO
When NORMAL mode is selected, it is
not displayed on the instrument cluster.
DRIVE MODE INTEGRATED CONTROL SYSTEM
CN7 N HMA 6.indd 6-44 2021-09-14  9:42:31

Driving Your Vehicle6-46
SPORT mode
SPORT mode manages
the driving dynamics by
automatically adjusting the
steering effort, the engine and
transmission control logic for
enhanced driving performance.
• When SPORT mode is selected by pressing the DRIVE MODE button, the
SPORT indicator will illuminate.
• When SPORT mode is activated: - The engine RPM will tend to remain raised over a certain length of time
even after releasing the accelerator
- Upshifts are delayed when accelerating
Information
In SPORT mode, the fuel efficiency may
decrease.
N Mode
N1 buttonN1 button
OCN7N061208 OCN7N061208
N2 buttonN2 button
OCN7N071130L OCN7N071130L
N mode may be selected by pressing the
N1 or N2 button.
The system resets to be in the NORMAL
mode, when the engine is restarted.
Information
The driver can set the N1 or N2 button to
N mode on the infotainment system screen.
For more details on N1 or N2 button
setup, refer to “N button” in this chapter.
CN7 N HMA 6.indd 6-46 2021-09-14  9:42:31

Driver Assistance System7-46
CAUTION
• Driver Attention Warning may
suggest a break depending on the
driver’s driving pattern or habits,
even if the driver doesn’t feel
fatigued.
• Driver Attention Warning is a
supplemental function and may not
be able to determine whether the
driver is inattentive.
• The driver who feels fatigued should
take a break at a safe location, even
though there is no break suggestion
by Driver Attention Warning.
Information
• For more details on setting the
functions in the infotainment system
Vehicle Settings, refer to “Vehicle
Settings” section in chapter 4.
• Driver Attention Warning will reset the
last break time to 0:00 in the following
situations:
- The engine is turned off
- The driver unfastens the seat belt
and opens the driver’s door
- The vehicle is stopped for more than
10 minutes
- When the driver resets Driver
Attention Warning, the last break
time is set to 0:00 and the driver’s
attention level is set to High.
Leading Vehicle Departure Alert
function
OCN7N071016LOCN7N071016L
When a detected vehicle in front departs
from a stop, Leading Vehicle Departure
Alert will inform the driver by displaying
the ‘Leading vehicle is driving away’
message on the cluster and an audible
warning will sound.
WARNING
• If any other system’s warning
message is displayed or audible
warning is generated, Driver
Attention Warning message may not
be displayed and audible warning
may not be generated.
• The driver has the responsibility to
safely drive and control the vehicle.
CAUTION
• Leading Vehicle Departure Alert is a
supplemental function and may not
alert the driver whenever the front
vehicle departs from a stop.
• Always check the front of the
vehicle and road conditions before
departure.
Information
• Images or colors may appear
differently depending on the instrument
panel specifications or theme.
CN7 N HMA 7.indd 7-46 2021-09-14  9:44:49