Abs Hyundai Equus 2016 Owner's Manual

Interior features...............3-145
Ashtray ...................................3-145
Cup holder..............................3-146
Sunvisor ..................................3-147
Rear vanity mirror ...............3-147
Power outlet ..........................3-148
Clock ........................................3-149
Clothes hanger......................3-150
Bag hanger ............................3-150
Floor mat anchor(s).............3-150
Luggage net (holder) ..........3-151
Rear curtain...........................3-152
AUX, USB and iPod
®port ..3-153
Multimedia system ...............4-2
Antenna.......................................4-2
Steering wheel audio
control .........................................4-3
Before driving ......................5-5
Before entering vehicle ..........5-5
Necessary inspections ............5-5
Before starting ........................5-5
Engine start/stop button ....5-7
Illuminated Engine Start/Stop
Button..........................................5-7
Engine Start/Stop Button
position........................................5-7
Starting the engine..............5-9
Automatic transmission.....5-11
Automatic transmission
operation ..................................5-12
Good driving practices ..........5-15
Brake system ......................5-17
Power brakes ..........................5-17
Electric parking brake
(EPB)..........................................5-19
Emergency braking ................5-22
AUTO HOLD .............................5-23
Anti-lock brake system
(ABS)..........................................5-26
Electronic stability control
(ESC) ..........................................5-28
Hill-start assist control
(HAC) .........................................5-32
Good braking practices.........5-32
Drive mode integrated
control system....................5-34
DRIVE mode / SNOW mode ..5-34
Electronic controlled
suspension (ECS) ...............5-36
To control the vehicle
height ........................................5-36
ECS (Electronic Controlled
Suspension) malfunction
warning message....................5-37
F17
4Multimedia system
5Driving your vehicle

Securing a child restraint to thelower anchor
Some manufacturers produce child
restraints, which are labeled as
LATCH or LATCH-compatible.
LATCH stands for "Lower Anchors
and Tethers for Children". These
child restraints are equipped with two
rigid or webbing-mounted attach-
ments, which are to be connected to
the two LATCH anchors in a specific
seat of your vehicle. This type of child
restraint does not use a seat belt to
be attached in a rear seat.
A sign is marked on the left rear and
right rear seatbacks to indicate the
location of the lower anchors for child
restraints. LATCH anchors are equipped in your
vehicle. The LATCH anchors are
located in the left rear and right rear
seats. Their locations are shown in
the illustration. There is no LATCH
anchor in the rear center seat.
The LATCH anchors are located
between the seatback and the seat
cushion. Follow instructions of the
child restraint manufacturer to prop-
erly install a LATCH or LATCH-com-
patible child restraint.
Upon installing the LATCH child
restraint, make sure that the seat is
properly attached to the LATCH and
tether anchors.
2-40
Safety system of your vehicle
OVI035060N
OVI035036N
Lower Anchor
Lower Anchor
Position Indicator
When using the vehicle's
"LATCH" system to install a
child restraint in a rear seat,
all seat belts taps of unoccu-
pied seats should be securely
buckled in metal latch plates,
and the seat belt webbing
must be fully retracted behind
the child restraint to prevent
the child from reaching or
holding any un-retracted seat
belts. Child's reaching to any
un-buckled metal latch plates
or tabs may result in strangu-
lation, serious injury or death
to the child.
Do not place anything around the lower anchors. Also make
sure that the seat belt is not
caught inside the lower
anchors.
WARNING

Air bag inflation conditions
Front air bags
Front air bags are designed to inflate
in a frontal collision depending on
impact intensity, a speed or an
impact angle.
2-62
Safety system of your vehicle Do not hit or allow any objects to strike the areas where the
air bags or the sensors are
installed.
This may cause unexpected
air bag deployment, resulting
in serious personal injury or
death.
When the sensor position or angle moves out of its default
position, the air bags may
deploy, or they should
not/may not deploy when they
should, causing severe injury
or death.
Therefore, do not attempt to
modify or repair the air bag
sensors. Have the vehicle
checked and repaired by an
authorized EQUUS dealer.
Problems may arise, when the sensor moves out of its
default position due to the
deformation of the front
bumper, the vehicle body and
the B-and-C pillars, where
side impact sensors are
installed. Have the vehicle
checked and repaired by an
authorized EQUUS dealer.
Your vehicle is designed to absorb impact and deploy the
air bag(s) in a certain colli-
sion. Installing bumper
guards or replacing a bumper
with imitated or counterfeit
parts may adversely affect
your vehicle and the air bags.
WARNING
OVI035049N

Air bags may not inflate, when avehicle collides with objects such
as utility poles or trees, where the
impact point is concentrated and
the collision energy is absorbed by
the vehicle.
SRS Care
The SRS is virtually maintenance
free and there are no parts you can
safely maintain by yourself. In case
that the SRS air bag warning light
" " does not illuminate when turn-
ing ON the Engine Start/Stop button,
or when continuously remains ON,
have your vehicle immediately
inspected by an authorized EQUUS
dealer.
The SRS system, the steering wheel,
the front panel, the front seats and
the roof rails must be installed,
repaired, maintained or removed
only by an authorized EQUUS deal-
er. Improper SRS modification may
result in serious personal injury.
2-65
Safety system of your vehicle02
OVI035055N
Modification to SRS compo-nents, such as a bandage
addition to the pad covers, or
other modifications to the
body structure may adversely
affect SRS performance and
result in injury.
Not only the modification of the area, where the SRS sen-
sor are installed, but also the
modification of other areas
may affect the SRS perform-
ance and result in possible
injury.
When cleaning the air bag pad covers, use only a soft and
dry cloth, or the one soaked
with plain water. Solvents or
cleaners may adversely affect
the air bag covers and prevent
its proper deployment.
(Continued)
WARNING

Dual-diagonal braking system
Your vehicle is equipped with dual-
diagonal braking systems. This
means you still have braking on two
wheels even if one of the dual sys-
tems fails.
With only one of the dual systems
working, longer pedal travel and
greater pedal pressure may be
required to stop the vehicle.
Also, the vehicle will not stop in as
short a distance only with one por-
tion of the brake systems working.
If the brakes fail while you are driv-
ing, shift to a lower gear for addition-
al engine braking and stop the vehi-
cle as soon as it is safe to do so.
Anti-lock Brake System(ABS) Warning Light
This warning light illuminates in
one of the following situations:
You turn ON the ignition switch or
Engine Start/Stop button.
- It illuminates for approximately 3seconds and then goes OFF.
There is a malfunction with the ABS (The normal braking system
is still operational without the
assistance of the anti-lock brake
system).
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
Electronic Brake forceDistribution (EBD)System Warning Light
These two warning lights illuminate
at the same time while driving in
the following situation:
The ABS and the regular brake
system may not properly operate.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
3-90
Convenient features of your vehicle
- Parking Brake & Brake Fluid Warning Light
Driving the vehicle with a warn-
ing light ON is dangerous. If the
Parking Brake & Brake Fluid
Warning Light illuminates with
the parking brake released, it
indicates that the brake fluid
level is low.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
WARNING

Information
- Electronic Brake forceDistribution (EBD) System
Warning Light
When the ABS warning light illumi-
nates, or when both the ABS and the
Parking Brake & Brake Fluid warn-
ing lights illuminate, the speedometer,
the odometer, or the tripmeter may
not properly operate. Also, the EPS
warning light may illuminate, and the
efforts to operate the steering wheel
may require to increase or decrease.
In this case, have your vehicle inspect-
ed by an authorized EQUUS dealer.
Malfunction Indicator Lamp (MIL)
This warning light illuminates in
one of the following situations:
You turn ON either the ignition
switch or the Engine Start/Stop
button.
- It remains ON until the engine isstarted.
There is a malfunction with the emission control system.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
- Malfunction Indicator Lamp (MIL)
Driving with the Malfunction
Indicator Lamp (MIL) ON may
damage the emission control sys-
tems which could affect drivability
and/or fuel economy.
- Gasoline Engine
When the Malfunction Indicator
Lamp (MIL) illuminates, the cat-
alytic converter is possibly dam-
aged, resulting in loss of engine
power.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
NOTICE
NOTICE
i
3-91
Convenient features of your vehicle03
- Electronic Brake force Distribution (EBD) System
Warning Light
When both ABS and the Parking
Brake & Brake Fluid warning
lights illuminate, the brake sys-
tem does not properly operate.
You may experience an unex-
pected and dangerous situation
in a sudden braking.
In this case, avoid sharp driving
and abrupt braking. Have your
vehicle inspected by an author-
ized EQUUS dealer.
WARNING

Inoperable conditions of the
Parking Assist System
The Parking Assist System maynot properly operate, when:
1. Moisture is frozen over the sensor.
(It will operate normally again
when the frozen ice melts.)
2. The sensor is covered or blocked with foreign substances, such as
snow or water. (It will normally
operate again when the substance
is removed, and the sensor is no
longer blocked.)
3. The sensor is stained with foreign substances such as snow or
water. (The sensing range will
return to normal when foreign sub-
stances are removed.)
There is a possible malfunctionwith the Parking Assist Systemwhen:
1. The vehicle drives on uneven road
surfaces such as unpaved roads,
gravels, bumps, or slopes.
2. The sensor is interfered with objects, which generate excessive
noise, such as horns, motorcycle
engines, or truck air brakes.
3. Heavy rain or water is sprayed.
4. Wireless transmitters or mobile phones are near the sensor.
5. The sensor is covered with snow.
Detecting range may decrease when:
1. Outside air temperature is
extremely hot or cold.
2. The sensor cannot detect an object, as it is smaller than 39 in (1
m) or narrower than 5.5 in (14 cm)
in diameter.
The following objects may notbe recognized by the sensor:
1. A sharp or slim object, such as
ropes, chains or small poles.
2. An object, such as clothes, spongy material or snow, absorbs the sen-
sor frequency.
Information
1. The warning may not soundsequentially depending on the speed
and shapes of the objects detected.
2. The Parking Assist System may malfunction if the vehicle bumper
height or sensor installation is mod-
ified. Any unauthorized installment
of equipment or accessories may
also limit the sensor performance.
3. Sensor may not recognize objects within 12 in (30 cm), or it may mis-
calculate the distance.
4. When the sensor is frozen or stained with snow or water, the sensor may
be inoperative until the stains are
removed using a soft cloth.
5. Do not push, scratch or strike the sensor with any hard objects that
could damage the sensor surface.
This may damage the sensor.
i
3-105
Convenient features of your vehicle03

Driving your vehicle
Before driving.........................................................5-5
Before entering vehicle ...................................................5-5
Necessary inspections .....................................................5-5
Before starting .................................................................5-5
Engine start/stop button ......................................5-7
Illuminated Engine Start/Stop Button ..........................5-7
Engine Start/Stop Button position ...............................5-7
Starting the engine ................................................5-9
Automatic transmission .......................................5-11
Automatic transmission operation ..............................5-12
Good driving practices ...................................................5-15
Brake system ........................................................5-17
Power brakes ...................................................................5-17
Electric parking brake (EPB) ........................................5-19
Emergency braking .........................................................5-22
AUTO HOLD ......................................................................5-\
23
Anti-lock brake system (ABS) .....................................5-26
Electronic stability control (ESC) ................................5-28
Hill-start assist control (HAC) ......................................5-32
Good braking practices..................................................5-32
Drive mode integrated control system .............5-34
DRIVE mode / SNOW mode ..........................................5-34
Electronic controlled suspension (ECS) ...........5-36
To control the vehicle height .......................................5-36
ECS (Electronic Controlled Suspension) malfunction
warning message.............................................................5-37

Anti-lock brake system (ABS)
The ABS continuously monitors the
wheel speed. When the wheels are
about to be locked, the ABS system
repeatedly modulates the hydraulic
brake pressure to the wheels.When you depress brake pedals in
conditions, which may lock the
wheels, you may hear a snapping
sound or feel like that from the
brakes. This is normal and indicates
your ABS is active.
In order to obtain the maximum ben-
efit from your ABS in an emergency
situation, do not attempt to modulate
your brake pressure or to pump your
brakes. Press your brake pedal as
hard, as possible, or as the situation
allows, in order for the ABS to control
the power delivery to the brakes.
Information
A clicking sound may be heard in the
engine compartment, when the engine
is started, and the vehicle begins to
move. These conditions are normal
and indicate that the anti-lock brake
system properly operates.
Even with the anti-lock brake sys-
tem, your vehicle still requires a
safe braking distance. Always
maintain a safe distance from the
vehicle in front of you.
Always slow down the speed when cornering. The anti-lock brake sys-
tem cannot prevent accidents
resulted from an excessively high
speed.
On loose or uneven road surfaces, operation of the anti-lock brake
system may result in a longer brak-
ing distance than the one of a vehi-
cle equipped with a conventional
brake system.
i
5-26
Driving your vehicle
ABS (or ESC, Electronic
Stability Control system) can-
not prevent accidents caused
by improper or dangerous driv-
ing maneuvers. Even though
you have more control over the
vehicle with emergency brak-
ing, always maintain a safe dis-
tance between you and objects
ahead. Vehicle speeds should
always be reduced in extreme
rough road conditions. The
braking distance of an ABS(or
ESC)-equipped vehicle may be
longer than the one of a ABS-
unequipped vehicle in the fol-
lowing road conditions. In these
conditions the vehicle should
be driven at a reduced speed:
A road surface is rough, or it is covered with gravel or
snow
Tire chains are installed
The road surface is pitted or uneven.
The safety performance of an
ABS(or ESC)-equipped vehicle
should not be tested by driving
at a high speed or cornering.
This may put you and others in
danger.
WARNING

When the ABS warning light illu-minates and remains ON, your
vehicle may have a problem with
the ABS. In this case, however,
your brake system is normally
operable.
The ABS warning light will stay ON for approximately 3 seconds
after the ignition switch is ON.
Then, the ABS will perform self-
diagnosis, and if everything is
normal, the light will go OFF. If
the light stays ON, your vehicle
may have a problem with the
ABS. Immediately contact an
authorized EQUUS dealer. When continuously depressing
brakes, while driving on a road
of poor traction, such as an icy
road, the ABS will be continu-
ously active, and the ABS warn-
ing light will illuminate. Pull over
the vehicle in a safe place and
stop the engine.
When restart the engine, and then the ABS warning light goes OFF,
your ABS system is normal.
Otherwise, your vehicle may have
a problem with the ABS.
Immediately contact an author-
ized EQUUS dealer.
Information
When you jump start your vehicle
because of a drained battery, the
engine may not run as smoothly, and
the ABS warning light may be turned
ON. This happens because of the low
battery voltage. It does not indicate
the ABS malfunction.
• Do not pump your brakes!
• Recharge the battery before drivingthe vehicle.
i
NOTICE
NOTICE
5-27
Driving your vehicle05
WKH-014