heating Hyundai H-1 (Grand Starex) 2003 Owner's Manual

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-10 C130P01P-GAT
A/T (AUTOMATIC TRANSMIS-
A/T (AUTOMATIC TRANSMIS- A/T (AUTOMATIC TRANSMIS-
A/T (AUTOMATIC TRANSMIS-
A/T (AUTOMATIC TRANSMIS-
SION) OIL TEMPERATURE
SION) OIL TEMPERATURE SION) OIL TEMPERATURE
SION) OIL TEMPERATURE
SION) OIL TEMPERATURE
WARNING LIGHT
WARNING LIGHT WARNING LIGHT
WARNING LIGHT
WARNING LIGHT
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
The A/T oil temperature warning light comes on when the automatic transmission oil tempera-ture goes up to the temperature that may resultin serious damage of automatic transmission. If the A/T oil temperature warning light comes on while driving, park your vehicle in at a safeplace as soon as possible and with the selectorlever is shifted into "P" position, and allow theengine to idle until the warning light goes off.And when the warning light goes off, the vehiclecan be driven normally. If the warning light doesn't go off or it lights up frequently, have the vehicle checked by yourHyundai dealer.
A/TA/T
A/TA/T
A/T
TEMPTEMP
TEMPTEMP
TEMP
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
If the engine were not started within 10
If the engine were not started within 10 If the engine were not started within 10
If the engine were not started within 10
If the engine were not started within 10 seconds after the preheating is completed,
seconds after the preheating is completed, seconds after the preheating is completed,
seconds after the preheating is completed,
seconds after the preheating is completed,
turn the ignition key once more to the
turn the ignition key once more to the turn the ignition key once more to the
turn the ignition key once more to the
turn the ignition key once more to the
"LOCK" position, and then to the "ON" po-
"LOCK" position, and then to the "ON" po- "LOCK" position, and then to the "ON" po-
"LOCK" position, and then to the "ON" po-
"LOCK" position, and then to the "ON" po-
sition, in order to preheat again.
sition, in order to preheat again. sition, in order to preheat again.
sition, in order to preheat again.
sition, in order to preheat again. B260E02A-GAT
SEAT BELT REMINDER LIGHT
SEAT BELT REMINDER LIGHT SEAT BELT REMINDER LIGHT
SEAT BELT REMINDER LIGHT
SEAT BELT REMINDER LIGHT
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
The seat belt reminder light comes on until your seat belt is fastened when the ignition key isturned from the "OFF" position to "ON" or"START". C130O01P-GAT
ENGINE WARNING LIGHT
ENGINE WARNING LIGHT ENGINE WARNING LIGHT
ENGINE WARNING LIGHT
ENGINE WARNING LIGHT
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
This light illuminates when there is a malfunc-
tion of an exhaust gas related component, andthe system is not functioning properly so thatthe exhaust gas regulation values are not satis-fied. This light will also illuminate when theignition key is turned to the "ON" position, andthen it will go out in a few seconds. If it illumi-nates while driving, or does not illuminate whenthe ignition key is turned to the "ON" position,take your car to your nearest authorized Hyundaidealer and have the system checked.
B260B01S-GAT SRS (AIRBAG) SERVICE
SRS (AIRBAG) SERVICE SRS (AIRBAG) SERVICE
SRS (AIRBAG) SERVICE
SRS (AIRBAG) SERVICE
REMINDER INDICATOR
REMINDER INDICATOR REMINDER INDICATOR
REMINDER INDICATOR
REMINDER INDICATOR (SRI)
(SRI) (SRI)
(SRI)
(SRI)
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
The SRS service reminder indicator (SRI)
comes on and flashes for about 6 secondsafter the ignition key is turned to the "ON"
position or after the engine is started, afterwhich it will go out.
This light also comes on when the SRS is not
working properly. If the SRI does not come on,or continuously remains on after flashing forabout 6 seconds when you turned the ignition
key to the "ON" position or started the engine,or if it comes on while driving, have the SRSinspected by an authorized Hyundai Dealer.
C130N01P-GAT
ANTI-LOCK BRAKE WARNING
ANTI-LOCK BRAKE WARNING ANTI-LOCK BRAKE WARNING
ANTI-LOCK BRAKE WARNING
ANTI-LOCK BRAKE WARNING
LIGHT (If installed)
LIGHT (If installed) LIGHT (If installed)
LIGHT (If installed)
LIGHT (If installed)
When the key is turned to the "ON" position, the
ABS light will come on and then go off in a fewseconds. If the ABS light remains on, comes on while
driving, or does not come on when the key isturned to the "ON" position, this indicates thatthere may be a problem with the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. Thenormal braking system will still be operational,but without the assistance of the anti-lock brakesystem.
AIRAIR
AIRAIR
AIR
BAGBAG
BAGBAG
BAG
B270B02O-GATPARKING START WARNING SOUND
PARKING START WARNING SOUND PARKING START WARNING SOUND
PARKING START WARNING SOUND
PARKING START WARNING SOUND
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
If the vehicle driven at over 10km/h(6mph) more 2~3 seconds, the warning chime will soundcontinuously when the parking brake engaged.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-24
C610A02P-GAG
Lever type23 4
1
There are four controls for the heating and cooling system. They are:
1. Fan Speed Control. This is used to turn the fan on and select thefan speed.
C610A01P-GAT
HEATING AND COOLING
HEATING AND COOLING HEATING AND COOLING
HEATING AND COOLING
HEATING AND COOLING
Rotary and push button type
C610A01P-GAG43
21
C430A01P-GAT
Type B (If installed)
Type B (If installed) Type B (If installed)
Type B (If installed)
Type B (If installed) C440A01P-GAT
DIGITAL CLOCK (If installed)
DIGITAL CLOCK (If installed) DIGITAL CLOCK (If installed)
DIGITAL CLOCK (If installed)
DIGITAL CLOCK (If installed)
C440A01P-GAGC430A01P-GAG
To use the ashtray, open up the lid. To remove the ashtray, open the lid and lift
upward holding the lid. The digital clock indicates the time while the
ignition switch is at either the "ON" or "ACC" position.
Set the time by pressing the various buttons as
described below.
HH
HH
H --
--
- To adjust the hours
MM
MM
M --
--
- To adjust the minutes
RR
RR
R --
--
- To reset the minutes to zero.
Example: 10 : 01 - 10 : 29 ................... change to 10 : 00 10 : 30 - 10 : 59 ................... change to 11 : 00

2-25
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C640A01P-GATVENTILATION
VENTILATION VENTILATION
VENTILATION
VENTILATION To operate the ventilation system:
o Set the air intake control to the "Fresh"
position.
o To direct all intake air to the dashboard vents, set the air flow control to the "Face" position.
o Adjust the fan speed control to the desired speed.
o Set the temperature control between "Cool" and "Warm".
C620A01P-GAT
HEATING CONTROLS
HEATING CONTROLS HEATING CONTROLS
HEATING CONTROLS
HEATING CONTROLS
For normal heater operation, move the air in-
take control to the "Fresh" position and the airflow control to the "Floor" position.
For faster heating, the air intake control should
be placed in the intermediate position between"Fresh" and "Recirc".
For quickest heating, the control should be in
the "Recirc" position.
If the windows fog up, move the air flow control
to the "Def" (defroster) position and the airintake control to "Fresh". For maximum heat, move the temperature con-
trol to "Warm". C630A01P-GAT
BI-LEVEL HEATING
BI-LEVEL HEATING BI-LEVEL HEATING
BI-LEVEL HEATING
BI-LEVEL HEATING
Your Hyundai is equipped with bi-level heating
controls. This makes it possible to have coolerair from the dashboard vents and warmer airfrom the floor outlets at the same time. To usethis feature,
o Set the air intake control at the "Fresh" position.
o Set the air flow control at the "Bi-Level" position.
o Set the temperaute control between "Cool" and "Warm"
2. Air Intake Control.
This allows you to select fresh ( ) outside air or to recirculate ( ) inside air.
3. Air Flow Control. This is used to direct the flow of air. Air canbe directed to the floor, dashboard outlets orwindshield. Five symbols are used to repre-sent Face ( ), Bi-Level ( ), Floor ( ),Floor-Defrost ( ) and Defrost ( ) airpositions.
4. Temperature Control This is used to turn the heater on and offand to select the degree of heating desired.
B710B01A-AAT
CENTER VENTILATOR
CENTER VENTILATOR CENTER VENTILATOR
CENTER VENTILATOR
CENTER VENTILATOR
B710B01P
The center ventilators are located in the middle
of the dashboard.
To change the direction of the airflow, turn the
control knob on the middle of the ventilator as desired.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-26 C670A01P-GAT
Operation Tips
Operation Tips Operation Tips
Operation Tips
Operation Tips
o To keep dust or unpleasant fumes from en-
tering the vehicle through the ventilation sys- tem, temporarily set the air intake control at"Recirc". Be sure to return the control to"Fresh" when the irritation has passed tokeep fresh air in the vehicle.This will help keep the driver alert and com-fortable.
o Air for the heating/cooling system is drawn in through the grilles just ahead of the wind-shield. Care should be taken that these arenot blocked by leaves, snow, ice or otherobstructions.
o Set the temperature control (3) to a comfort-
ably warm position.
o Set the fan speed control (4) to position 3 or 4.
o If the vehicle is equipped with a A/C sys- tem, turn the A/C switch (5) on for in-creased defogging action.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
In high humidity areas, the A/C can be used
In high humidity areas, the A/C can be used In high humidity areas, the A/C can be used
In high humidity areas, the A/C can be used
In high humidity areas, the A/C can be used
with the air intake in the "Recirc" position
with the air intake in the "Recirc" position with the air intake in the "Recirc" position
with the air intake in the "Recirc" position
with the air intake in the "Recirc" position
for increased defogging action.
for increased defogging action. for increased defogging action.
for increased defogging action.
for increased defogging action.
C650A01P-GAT
SIDE VENTILATOR
SIDE VENTILATOR SIDE VENTILATOR
SIDE VENTILATOR
SIDE VENTILATOR
C650A01P-GAG
The side ventilators are located on each side of the dash board. The side vent knobs controlthe amount of outside air entering the vehiclethrough the side vents. These vents can alsobe closed, so no air enters through the sidevents. To change the direction of the air flow,turn the control knobs as desired. C660A01P-GAT
DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGING DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGING
DEFROSTING/DEFOGGINGC660A01P-GAG
1 2
453
To use the heating/ventilation system to defrost
or defog the windshield:
o Set the air intake control (1) to the "Fresh" position.
o Set the air flow control (2) to the "Def" position.
C660B01P

2-27
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C680A02P-GAG
C690A01P-GAT
Dehumidified heating
Dehumidified heating Dehumidified heating
Dehumidified heating
Dehumidified heating
C690A01P-GAG
C680A01P-GAG
C680A01P-GAT
AIR CONDITIONER OPERATION
AIR CONDITIONER OPERATION AIR CONDITIONER OPERATION
AIR CONDITIONER OPERATION
AIR CONDITIONER OPERATION
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
Cooling
Cooling Cooling
Cooling
Cooling
To use the air conditioner to cool interior:
o Set the side vent control to "OFF", to shut off outside air entry. o Turn on the fan control switch.
o Turn on the air conditioner switch by push-
ing in on the switch. The air conditioner indicator light should come on at the sametime.
o Set the air intake control to the "Fresh" position.
o Set the temperature control to the "Cool" position. ("Cool" provides maximum cooling. The tem- perature may be moderated by moving thecontrol toward "Warm".)
o Adjust the fan control to the desired speed. For greater cooling, turn the fan control toone of the higher speeds or temporarilyselect the "Recirc" position on the air intakecontrol.
C690A02P-GAG
For dehumidified heating:
o Turn on the fan control switch.
o Turn on the air conditioner switch by pushing in on the switch. The air conditioner indicator light should come on at the same time.
o Set the air intake control to "Fresh".
o Set the air flow control to "Face".
o Adjust the fan control to the desired speed. For more rapid action, set the fan at one of the higher speeds.
o Adjust the temperature control to provide the desired amount of warmth.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-28 C730A01P-GAT
CONTROL PANEL
CONTROL PANEL CONTROL PANEL
CONTROL PANEL
CONTROL PANEL
C730A01P-1
213
REAR HEATER & A/CON (ROTARY TYPE)
C730A02P-1
REAR HEATER & A/CON (LEVER TYPE)
1
2 3
1.1.
1.1.
1. Mode selector lever
Mode selector lever Mode selector lever
Mode selector lever
Mode selector lever Air flow can be switched in three modes. Three symbols are used to represent FloorHeat, Bi-level and Vent Air position.
C700A01P-GAT
Operation Tips
Operation Tips Operation Tips
Operation Tips
Operation Tips
o If the interior of the vehicle is hot when you
first get in, open the windows for a few minutes to expel the hot air.
o When you are using the air conditioning system, keep all windows closed to keephot air out.
o When you must drive slowly, as in heavy traffic, shift to a lower gear. This increasesengine speed, which in turn increases thespeed of the air conditioning compressor.
o When driving up long grades, turn occa- sionally the air conditioner off to avoid thepossibility of the engine overheating.
o During winter months or in periods when the air conditioner is not used regularly, turn onthe air conditioner switch occasionally for afew minutes. This will help circulate thelubricants and keep your system in peakoperating condition.
C710A01P-GAT REAR HEATER (If installed)
REAR HEATER (If installed) REAR HEATER (If installed)
REAR HEATER (If installed)
REAR HEATER (If installed)
The rear heater can be operated with the igni-
tion switch at the "ON" position by depressingthe main switch in the instrument panel. C720A01P-GAT
Main switch for the rear heater
Main switch for the rear heater Main switch for the rear heater
Main switch for the rear heater
Main switch for the rear heater
C720A01P-GAG
The main switch for the rear heater is installed
in the instrument panel.
The main switch should be used to switch the
power of the rear heater ON and OFF.
The power is switched ON when the button is
pressed, and the lamp within the switch is illuminated. Illumination will stop and the powerwill be switched OFF when the button is pressedonce again.

2-29
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C750A03P-GATOVERHEAD AIR CONDITIONING
OVERHEAD AIR CONDITIONING OVERHEAD AIR CONDITIONING
OVERHEAD AIR CONDITIONING
OVERHEAD AIR CONDITIONING
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
C750A01P-1
1
The overhead air conditioner can be operated
with the ignition switch at the "ON" position by depressing the main switch in the instrumentpanel.
1. Blower knob
The blower can be operated at three speeds to regulate the amount of air forced throughthe vehicle. The overhead air conditionerwill not operate if the knob is set to the "O". The blower speed will increase as the knob is moved to the right.
2.2.
2.2.
2. Temperature controller
Temperature controller Temperature controller
Temperature controller
Temperature controller
Lever type - Select the desired tempera-
ture by sliding the lever left or right.
Rotary type - Select the desired tempera- ture by turn the knob left orright.
Red - High temperaute (heating)
Blue - Ambient temperature(ventilating)
3.3.
3.3.
3. Blower controller
Blower controller Blower controller
Blower controller
Blower controllerThe blower can be operated (when the ignition key and main switch for the rearheater is at the "ON" position) at threespeeds to regulate the amount of air forcedthrough the vehicle. The blower speed will increase as the switch is moved to the right.
C740A01P-GAT REAR AIR CONDITIONING (If installed)
REAR AIR CONDITIONING (If installed) REAR AIR CONDITIONING (If installed)
REAR AIR CONDITIONING (If installed)
REAR AIR CONDITIONING (If installed)
The rear air conditioner can be operated with
the ignition switch at the "ON" position by de-pressing the main switch in the instrument panel.
1. Air conditioning switch
The air conditioning is turned on or off by pushing the button.
2. The operations of the rear air conditioner is identical to AIR CONDITIONER OPERRA-TION of page 2-27.
C760A01P-GAG
B760A02P-GAT
AIR FILTER (FOR EVAPORATOR AND
AIR FILTER (FOR EVAPORATOR AND AIR FILTER (FOR EVAPORATOR AND
AIR FILTER (FOR EVAPORATOR AND
AIR FILTER (FOR EVAPORATOR AND
BLOWER UNIT) (If installed)
BLOWER UNIT) (If installed) BLOWER UNIT) (If installed)
BLOWER UNIT) (If installed)
BLOWER UNIT) (If installed)
The air filter is located in the air intake duct
behind the windshield washer reservoir. It oper- ates to prevent the pollutant entering the car.
C760B01PClamp
Air intake duct
Air intake duct
Air Filter
Air intake duct
Engine room
Evaporator unit
Blower unit
Air Filter Inside ofvehicle

2-45
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260D01O-AAT 1.1.
1.1.
1. Playing CD
Playing CD Playing CD
Playing CD
Playing CD
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation.
o When a disc is in the CD deck, if you press the play button, the CD player will begin playing even if the radio is being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3.
TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press once to skip forward to the beginn- ing of the next track. Press once to skipback to the beginning of the track.
4.4.
4.4.
4. SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. 5.5.
5.5.
5. REPEAT Button
REPEAT Button REPEAT Button
REPEAT Button
REPEAT Button
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation, when the track ends, it will automatically be re-played.This process will be continued until youpush the button again.
6.6.
6.6.
6.
EJECT Button
EJECT Button EJECT Button
EJECT Button
EJECT Button
When the EJECT button is pressed with theCD loaded, the CD is ejected. NOTE:
o To assure proper operation of the unit, keep the vehicle interior temperature within a normal range by using thevehicle's air conditioning or heating sys-tem.
o When replacing the fuse, replace it with a fuse having the correct capacity.
o The preset station frequencies are all erased when the car battery is discon-nected. Therefore, all data will have to beset again if this should occur.
o Do not add any oil to the rotating parts. Keep magnets, screwdrivers and othermetallic objects away from the tapemechanism and head.
o This equipment is designed to be used only in a 12 volt DC battery system withnegative ground. o This unit is made of precision parts. Do
not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
o Do not expose this equipment (including the speakers) to water or excessive mois-ture.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-54 H290F01O-GAT
1.1.
1.1.
1. CD Select Button
CD Select Button CD Select Button
CD Select Button
CD Select Button
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation or cassette tape playing.
o When a disc is in the CD deck, if you press the play button the CD player will begin playing even if the radio or cassette playeris being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3. TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press button once to skip forward to the beginning of the next track. Press buttononce to skip back to the beginning of thetrack. 4.4.
4.4.
4. REPEAT
REPEAT REPEAT
REPEAT
REPEAT
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation when the track ends, it will automatically be re-played. This process will be continued until you push the button again.
5.5.
5.5.
5.
EQUALIZER Button
EQUALIZER Button EQUALIZER Button
EQUALIZER Button
EQUALIZER Button
Press the EQ button to select the CLASSIC,
JAZZ, ROCK and DEFEAT MODE for the de-sired tone quality. Each press of the buttonchanges the display as follows; NOTE:
NOTE: NOTE:
NOTE:
NOTE:
oo
oo
o To assure proper operation of the unit,
To assure proper operation of the unit, To assure proper operation of the unit,
To assure proper operation of the unit,
To assure proper operation of the unit,
keep the vehicle interior temperature
keep the vehicle interior temperature keep the vehicle interior temperature
keep the vehicle interior temperature
keep the vehicle interior temperature
within a normal range by using the
within a normal range by using the within a normal range by using the
within a normal range by using the
within a normal range by using the
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys- vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
tem.tem.
tem.tem.
tem.
oo
oo
o When replacing the fuse, replace it with a
When replacing the fuse, replace it with a When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
fuse having the correct capacity.
fuse having the correct capacity. fuse having the correct capacity.
fuse having the correct capacity.
fuse having the correct capacity.
oo
oo
o The preset station frequencies are all
The preset station frequencies are all The preset station frequencies are all
The preset station frequencies are all
The preset station frequencies are all
erased when the car battery is discon-
erased when the car battery is discon- erased when the car battery is discon-
erased when the car battery is discon-
erased when the car battery is discon-
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
set again if this should occur.
set again if this should occur. set again if this should occur.
set again if this should occur.
set again if this should occur.
oo
oo
o Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts. Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
metallic objects away from the tape
metallic objects away from the tape metallic objects away from the tape
metallic objects away from the tape
metallic objects away from the tape
mechanism and head.
mechanism and head. mechanism and head.
mechanism and head.
mechanism and head.
oo
oo
o This equipment is designed to be used
This equipment is designed to be used This equipment is designed to be used
This equipment is designed to be used
This equipment is designed to be used
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
negative ground.
negative ground. negative ground.
negative ground.
negative ground.
oo
oo
o This unit is made of precision parts. Do
This unit is made of precision parts. Do This unit is made of precision parts. Do
This unit is made of precision parts. Do
This unit is made of precision parts. Do
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
parts.
parts. parts.
parts.
parts.
oo
oo
o When driving your vehicle, be sure to
When driving your vehicle, be sure to When driving your vehicle, be sure to
When driving your vehicle, be sure to
When driving your vehicle, be sure to
keep the volume of the unit set low
keep the volume of the unit set low keep the volume of the unit set low
keep the volume of the unit set low
keep the volume of the unit set low
enough to allow you to hear sounds com-
enough to allow you to hear sounds com- enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
ing from the outside.
ing from the outside. ing from the outside.
ing from the outside.
ing from the outside.
oo
oo
o Do not expose this equipment (including
Do not expose this equipment (including Do not expose this equipment (including
Do not expose this equipment (including
Do not expose this equipment (including
the speakers and tape) to water or exces-
the speakers and tape) to water or exces- the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
sive moisture.
sive moisture. sive moisture.
sive moisture.
sive moisture.
CLASSIC

JAZZ
ROCK
DEFEAT

6.6.
6.6.
6.
CD EJECT Button
CD EJECT Button CD EJECT Button
CD EJECT Button
CD EJECT Button
When the button is pressed with the CD
loaded, the CD is ejected.
7.7.
7.7.
7. SCAN Button (If installed)
SCAN Button (If installed) SCAN Button (If installed)
SCAN Button (If installed)
SCAN Button (If installed)
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track.

3-1
STARTING & OPERATING
STARTING & OPERATING STARTING & OPERATING
STARTING & OPERATING
STARTING & OPERATING
D010A01P-GAT PRECAUTION FOR EXHAUST FUMES
PRECAUTION FOR EXHAUST FUMES PRECAUTION FOR EXHAUST FUMES
PRECAUTION FOR EXHAUST FUMES
PRECAUTION FOR EXHAUST FUMES
WHILE STARTING AND DRIVING
WHILE STARTING AND DRIVING WHILE STARTING AND DRIVING
WHILE STARTING AND DRIVING
WHILE STARTING AND DRIVING
1. Do not breathe exhaust fumes containing
carbons monoxide when starting or driving. Carbon monoxide is a colorless, odorlessgas and can cause unconsciousness ordeath by asphyxiation.
2. Open all the windows fully and get the back door closed if you smell exhaust fumesinside the vehicle. Have the cause immedi-ately located and corrected.
3. Check the exhaust system, from time to time, for holes or loose connections if youhear a change in the exhaust sound, or ifsomething has hit the exhaust system.
4. Do not race the engine in a garage or enclosed area any longer than it takes tostart the engine and drive the vehicle in orout. The sealed exhaust fume may make aparticularly dangerous situation.
5. Avoid idling the engine for prolonged periods with people inside the car. If it is unavoid-able, however, be sure to do so in an openarea and adjust the heating or cooling sys-tem to force outside into the vehicle. 6. Make sure that the ventilation air intakes
located just in front of the windshield arekept clear of snow, ice, leaves or otherobstructions, to assure proper operation ofthe ventilation system.
7. Get the back door closed while driving. An incompletely closed back door may causeexhaust fumes to be drawn into the vehicle.If you must drive with the back door open toaccommodate a large object, close the win-dows, open the dashboard vents and havethe heating or cooling system deliver freshair into the vehicle by turning the fan to highspeeds with the air intake control lever set inthe "Fresh" position (Minibus, Van). LOCK
LOCK LOCK
LOCK
LOCK ::
::
: The engine stops and the steeringwheel is locked. The key can be in-serted and removed only at this posi-tion.
ACC
ACC ACC
ACC
ACC ::
::
: The engine stops, but the radio, ciga-rette lighter, etc., can be operated.
ONON
ONON
ON
::
::
: The engine is running and all electricalsystems can be operated.
START
START START
START
START ::
::
: The starter motor operates. After theengine has started, release the keyand it will automatically return to the"ON" position.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION: (1) If the engine is stopped while driving, the
(1) If the engine is stopped while driving, the (1) If the engine is stopped while driving, the
(1) If the engine is stopped while driving, the
(1) If the engine is stopped while driving, the
brake servomechanism will cease to func-
brake servomechanism will cease to func- brake servomechanism will cease to func-
brake servomechanism will cease to func-
brake servomechanism will cease to func-
tion and braking efficiency will deterio-
tion and braking efficiency will deterio- tion and braking efficiency will deterio-
tion and braking efficiency will deterio-
tion and braking efficiency will deterio-
rate.
rate. rate.
rate.
rate.
(2) Do not leave the key at the "ON" position
(2) Do not leave the key at the "ON" position (2) Do not leave the key at the "ON" position
(2) Do not leave the key at the "ON" position
(2) Do not leave the key at the "ON" position
for a long time when the engine is not
for a long time when the engine is not for a long time when the engine is not
for a long time when the engine is not
for a long time when the engine is not
running; doing so will cause the battery
running; doing so will cause the battery running; doing so will cause the battery
running; doing so will cause the battery
running; doing so will cause the battery
to be discharged.
to be discharged. to be discharged.
to be discharged.
to be discharged.
(3)(3)
(3)(3)
(3) Do not turn the key to the "START" posi-
Do not turn the key to the "START" posi- Do not turn the key to the "START" posi-
Do not turn the key to the "START" posi-
Do not turn the key to the "START" posi-
tion when the engine is running; doing
tion when the engine is running; doing tion when the engine is running; doing
tion when the engine is running; doing
tion when the engine is running; doing
so could damage the starter motor.
so could damage the starter motor. so could damage the starter motor.
so could damage the starter motor.
so could damage the starter motor.
D000A01P-GAT
3.3.
3.3.
3. ST
ST ST
ST
ST AR
AR AR
AR
AR TING &
TING & TING &
TING &
TING &
OPERA
OPERA OPERA
OPERA
OPERA TING
TING TING
TING
TING
D020A01P-GATIGNITION SWITCH
IGNITION SWITCH IGNITION SWITCH
IGNITION SWITCH
IGNITION SWITCH
GT30010A
33
33
3