clock HYUNDAI I20 2023 User Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 256 of 649
![HYUNDAI I20 2023 User Guide 5-115
05
(1) Current file number and the total
number of files
(2) Playback time
(3) Information about the song currently
playing
Press the [ 0 ( 1 8 & / 2 & .] button on the
control panel to a](/img/35/56129/w960_56129-255.png "HYUNDAI I20 2023 User Guide 5-115
05
(1) Current file number and the total
number of files
(2) Playback time
(3) Information about the song currently
playing
Press the [ 0 ( 1 8 & / 2 & .] button on the
control panel to a")
5-115
05
(1) Current file number and the total
number of files
(2) Playback time
(3) Information about the song currently
playing
Press the [ 0 ( 1 8 & / 2 & .] button on the
control panel to access the following
menu options:
[ / L V W: Access the file list.
[ ) R O G H U O L V W: Access the folder list.
[ Information: Display information
about the song currently playing.
[ 6 R X Q G V H W W L Q J V: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
- % D O D Q F H: Select a location where
sound will be concentrated in the
vehicle. Select % D O D Q F H, turn the
[ 7 8 1 (] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select & H Q W U H.
- ( T X D O L V H U: Adjust the output level for
each sound tone mode.
- 6 S H H G G H S H Q G H Q W Y R O : Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE
[ ' H S H Q G L Q J R Q Y H K L F O H P R G H O V R U
V S H F L I L F D W L R Q V D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ ' H S H Q G L Q J R Q W K H V \ V W H P R U
D P S O L I L H U V S H F L I L F D W L R Q V D S S O L H G W R
\ R X U Y H K L F O H D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ 6 R Q J L Q I R U P D W L R Q 0 H G L D ' L V S O D \ :
Select information such as Folder/File
or $ U W L V W 7 L W O H $ O E X P to display when
playing MP3 files.
[ 0 R G H S R S X S: Set to display mode
selection window when the
[AUDIO] button is pressed on the
control panel.
[ ' D W H 7 L P H: You can change the
date and time that are shown on the
system display.
- 6 H W G D W H: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
- 7 L P H I R U P D W: Select to display time
in the 12 hour format or the 24 hour
format.
- ' L V S O D \ 3 R Z H U 2 I I : Set to display
the clock when the system power
is off.
[ / D Q J X D J H: You can change the display
language.
Rewinding/Fast forwarding
On the control panel, press and hold the
[< 6 ( ( .] button / [ 7 5 $ & . >] button.
[ You can also push and hold the Up/
down lever on the steering wheel.
Page 261 of 649
5-120
Convenient features
8 V L Q J D % O X H W R R W K D X G L R G H Y L F H
You can listen to music stored in the
connected Bluetooth audio device via
your vehicle’s speakers.
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [ 7 8 1 (] knob to
select % O X H W R R W K D X G L R and then press
the knob.
(1) Information about the song currently
playing
1. Press the [ 0 ( 1 8 & / 2 & .] button
on the control panel to access the
following a menu option.
2. Turn the [ 7 8 1 (] knob to select option
and then press the knob.
[ 6 R X Q G V H W W L Q J V: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level
for each range.
- % D O D Q F H: Select a location where
sound will be concentrated in the
vehicle. Select % D O D Q F H, turn the
[ 7 8 1 (] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select & H Q W U H.
- ( T X D O L V H U: Adjust the output level
for each sound tone mode.
- 6 S H H G G H S H Q G H Q W Y R O : Set
the volume to be adjusted
automatically according to your
driving speed.
NOTICE
[ ' H S H Q G L Q J R Q Y H K L F O H P R G H O V R U
V S H F L I L F D W L R Q V D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ ' H S H Q G L Q J R Q W K H V \ V W H P R U
D P S O L I L H U V S H F L I L F D W L R Q V D S S O L H G W R
\ R X U Y H K L F O H D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ 0 R G H S R S X S: Set to display mode
selection window when the [AUDIO]
button is pressed on the control
panel.
[ ' D W H 7 L P H: You can change the
date and time that are shown on the
system display.
- 6 H W G D W H: Set date to display on
the system display.
-Set time: Set time to display on
the system display.
- 7 L P H I R U P D W: Select to display
time in the 12 hour format or the
24 hour format.
- ' L V S O D \ 3 R Z H U 2 I I : Set to display
the clock when the system power
is off.
[ / D Q J X D J H: You can change the
display language.
Page 524 of 649
8-9
08
If your temperature gauge indicates
overheating, you experience a loss of
power, or hear loud pinging or knocking,
the engine may be overheating. If this
happens, you should:
1. Pull off the road and stop as soon as it
is safe to do so.
2. Place the shift lever in P (Park, for
automatic transmission/dual clutch
transmission vehicle) or neutral (for
manual transmission/dual clutch
transmission vehicle) and set the
parking brake. If the air conditioning is
ON, turn it OFF.
3. If engine coolant is running out under
the vehicle or steam is coming out
from the bonnet, stop the engine. Do
not open the bonnet until the coolant
has stopped running or the steaming
has stopped. If there is no visible
loss of engine coolant and no steam,
leave the engine running and check
to be sure the engine cooling fan is
operating. If the fan is not running,
turn the engine off.
WARNING
Whilst the engine is
running, keep hands,
clothing and tools away
from the moving parts such
as the cooling fan and drive
belt to prevent serious
injury.4. Check for coolant leaking from the
radiator, hoses or under the vehicle. (If
the air conditioning had been in use, it
is normal for cold water to be draining
from it when you stop.)
5. If engine coolant is leaking out, stop
the engine immediately and we
recommend that you call a HYUNDAI
authorised repairer for assistance.
WARNING
NEVER remove the radiator
cap or the drain plug whilst
the engine and radiator are
hot. Hot coolant and steam
may blow out under
pressure, causing serious injury.
Turn the engine off and wait until the
engine cools down. Use extreme care
when removing the radiator cap. Wrap
a thick towel around it, and turn it
counterclockwise slowly to the first
stop. Step back whilst the pressure
is released from the cooling system.
When you are sure all the pressure
has been released, press down on the
cap, using a thick towel, and continue
turning counterclockwise to remove it.
IF THE ENGINE OVERHEATS
Page 531 of 649
8-16
Emergency situations
WARNING
Changing a tyre can be dangerous.
Follow the instructions in this section
when changing a tyre to reduce the risk
of serious injury or death.
CAUTION
Be careful as you use the jack handle to
stay clear of the flat end. The flat end
has sharp edges that could cause cuts.
Jack and tools
OGB064012
(1) Jack handle
(2) Jack
(3) Wheel lug nut wrench
The jack, jack handle and wheel lug
nut wrench are stored in the luggage
compartment under the luggage box
cover. (if equipped)
OLF064031N
The jack is provided for emergency tyre
changing only.
Turn the winged hold down bolt
counterclockwise to remove the spare
tyre.
Store the spare tyre in the same
compartment by turning the winged
hold down bolt clockwise.
To prevent the spare tyre and tools from
“rattling”, store them in their proper
location.
OLF064005
If it is hard to loosen the tyre hold-down
wing bolt by hand, you can loosen it
easily using the jack handle.
1. Put the jack handle (1) inside of the
tyre hold-down wing bolt.
2. Turn the tyre hold-down wing bolt
counterclockwise with the jack handle.
, ) < 2 8 + $ 9 ( $ ) / $ 7 7 < 5 (
Page 532 of 649
8-17
08
Changing tyres
WARNING
A vehicle can slip or roll off of a jack
causing serious injury or death to you
or those nearby. Take the following
safety precautions:
[ Do not get under a vehicle that is
supported by a jack.
[ NEVER attempt to change a tyre in
the lane of traffic. ALWAYS move the
vehicle completely off the road on
level, firm ground away from traffic
before trying to change a tyre. If you
cannot find a level, firm place off
the road, call a towing service for
assistance.
[ Be sure to use the jack provided with
the vehicle.
[ ALWAYS place the jack on the
designated jacking positions on the
vehicle and NEVER on the bumpers
or any other part of the vehicle for
jacking support.
[ Do not start or run the engine whilst
the vehicle is on the jack.
[ Do not allow anyone to remain in the
vehicle whilst it is on the jack.
[ Keep children away from the road
and the vehicle.
Follow these steps to change your
vehicle’s tyre:
1. Park on a level, firm surface.
2. Move the shift lever into P (Park, for
automatic transmission/dual clutch
transmission vehicle) or neutral
(for manual transmission vehicle),
apply the parking brake, and place
the ignition switch in the LOCK/OFF
position.
3. Press the hazard warning flasher
button.
4. Remove the wheel lug nut wrench,
jack, jack handle, and spare tyre from
the vehicle.
OBC3080005
[A] : Block
5. Block both the front and rear of the
tyre diagonally opposite of the tyre
you are changing.
OBC3080006
6. Loosen the wheel lug nuts
counterclockwise one turn each in
the order shown above, but do not
remove any lug nuts until the tyre has
been raised off of the ground.
Page 533 of 649
8-18
Emergency situations
OBC3080007
7. Place the jack at the designated
jacking position under the frame
closest to the tyre you are changing.
The jacking positions are plates
welded to the frame with two notches.
Never jack any other position or part
of the vehicle. Doing so may damage
the side seal molding or other parts of
the vehicle.
OBC3080008
8. Insert the jack handle into the jack and
turn it clockwise, raising the vehicle
until the tyre clears the ground. Make
sure the vehicle is stable on the jack.9. Loosen the lug nuts with the wheel
lug nut wrench and remove them
with your fingers. Remove the wheel
from the studs and lay it flat on the
ground out of the way. Remove any
dirt or debris from the studs, mounting
surfaces, and wheel.
10. Install the spare tyre onto the studs
of the hub.
11. Tighten the lug nuts with your fingers
onto the studs with the smaller end of
the lug nuts closest to the wheel.
12. Lower the vehicle to the ground
by turning the jack handle
counterclockwise.
OBC3080009
13. Use the wheel lug nut wrench to
tighten the lug nuts in the order
shown. Double-check each lug nut
until they are tight. After changing
tyres, we recommend that a
HYUNDAI authorised repairer tighten
the lug nuts to their proper torque as
soon as possible. The wheel lug nut
should be tightened to 11~13kgf.m
(79~94 lbf.ft, 107~127N.m).
Page 548 of 649
8-33
08
When towing your vehicle in an
emergency without wheel dollies:
1. Place the ignition switch in the ACC
position.
2. Place the shift lever in N (Neutral).
3. Release the parking brake.
CAUTION
Failure to place the shift lever in N
(Neutral) may cause internal damage to
the transmission.
Removable towing hook
OBC3080017
1. Open the tailgate, and remove the
towing hook from the tool case.
OBC3080018
2. Remove the hole cover by pressing
the lower part of the cover on the
bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install
the cover after use.
Page 576 of 649
9-17
09
OBC3090006
„Type A
„Type B
OBC3090007
WARNING
Do not remove a radiator cap/
engine coolant reservoir cap.
[ Never attempt to remove the radiator
cap/engine coolant reservoir cap
whilst the engine is operating or hot.
[ Doing so might lead to cooling
system failure and engine damage
and could result in serious personal
injury from escaping hot coolant or
steam.
[ Turn the engine off and wait until
it cools down. Use extreme care
when removing the radiator cap/
engine coolant reservoir cap. Wrap
a thick towel around it, and turn it
counterclockwise slowly to the first
stop. Step back whilst the pressure is
released from the cooling system.[ When you are sure all the pressure
has been released, press down on the
cap, using a thick towel, and continue
turning counterclockwise to remove
it.
[ Even if the engine is not operating,
do not remove the radiator cap/
engine coolant reservoir cap or the
drain plug whilst the engine and
radiator are hot. Hot coolant and
steam may still blow out under
pressure, causing serious injury.
WARNING
The electric motor (cooling
fan) is controlled by engine
coolant temperature,
refrigerant pressure and
vehicle speed.
It may sometimes operate even when
the engine is not running. Use extreme
caution when working near the blades
of the cooling fan so that you are not
injured by a rotating fan blades. As the
engine coolant temperature decreases,
the electric motor will automatically
shut off. This is a normal condition.
The electric motor (cooling fan) may
operate until you disconnect the
negative battery cable.
Page 621 of 649
9-62
Maintenance
+ H D G O L J K W / R Z + L J K
1. Turn the front wheel at inwards.
OAC3089042TU
OAC3089043TU
OBC3090055
2. Remove the Wheel guard clips (B),
bumper cover bolt (A) and bumper
upper cover blots (C).
3. Push the wheel guard aside and
remove the headlight bulb cover by
turning it counterclockwise from bulb
assembly.
OBC3090038
OBC3TN091005
„CUV
4. Disconnect the headlight bulb socket-
connector.
5. Unsnap the headlight bulb retaining
wire by depressing the end and
pushing it upward.
6. Remove the bulb from the headlight
assembly.
7. Install a new headlight bulb and snap
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.
8. Connect the headlight bulb socket
connector.
9. Install the headlight bulb cover by
turning it clockwise.
10. Install the wheel guard in the reverse
order.
Page 622 of 649
9-63
09
OBC3090039
OBC3TN091006
„CUV
7 X U Q V L J Q D O O L J K W
1. Open the bonnet.
2. Remove the turn signal light or low
beam assist-static light bulb cover by
turning it counterclockwise.
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly.
Push the socket into the assembly and
turn the socket clockwise.
6. Install the turn signal light or low
beam assist-static light bulb cover by
turning it clockwise.
3 R V L W L R Q O L J K W ' D \ W L P H U X Q Q L Q J O L J K W
L I H T X L S S H G
If the LED lamp does not operate,
we recommend that the system be
inspected by a HYUNDAI authorised
repairer.
The LED lamps cannot be replaced as
a single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit. Unless a skilled technician
checks or repairs the LED lamp, it may
damage related parts of the vehicle.