reset HYUNDAI I20 2023 Owner's Manual

5-109
05
7XUQLQJRQWKHUDGLR
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [781(] knob to
select the desired radio mode and
then press the knob.
FM/AM Mode
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [0(18&/2&.] button on the
control panel to access the following
menu options:

[$XWRVWRUH: Save radio stations to the
preset list.

[6FDQ: The system searches for radio
stations with strong radio signals and
plays each radio station for about five
seconds.

[6RXQGVHWWLQJV: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
-%DODQFH: Select a location where
sound will be concentrated in the
vehicle. Select %DODQFH, turn the
[781(] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select &HQWUH.
-(TXDOLVHU: Adjust the output level for
each sound tone mode.
-6SHHGGHSHQGHQWYRO: Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE

['HSHQGLQJRQYHKLFOHPRGHOVRU
VSHFLILFDWLRQVDYDLODEOHRSWLRQVPD\
YDU\

['HSHQGLQJRQWKHV\VWHPRU
DPSOLILHUVSHFLILFDWLRQVDSSOLHGWR
\RXUYHKLFOHDYDLODEOHRSWLRQVPD\
YDU\

[0RGHSRSXS: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.

['DWH7LPH: You can change the
date and time that are shown on the
system display.
-6HWGDWH: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
-7LPHIRUPDW: Select to display time
in the 12 hour format or the 24 hour
format.
-'LVSOD\3RZHU2II: Set to display
the clock when the system power
is off.

[/DQJXDJH: You can change the display
language.
5$',2

5-110
Convenient features
)0$00RGH:LWK5'6
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [0(18&/2&.] button on the
control panel to access the following
menu options:

[7UDIILFDQQRXQFHPHQW: Activate or
deactivate traffic announcements.
Announcements and programmes will
be received automatically if available.

[$XWRVWRUH: Save radio stations to the
preset list.

[6FDQ: The system searches for radio
stations with strong radio signals
and plays each option for about five
seconds.

[6RXQGVHWWLQJV: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
-%DODQFH: Select a location where
sound will be concentrated in the
vehicle. Select %DODQFH, turn the
[781(] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select &HQWUH.
-(TXDOLVHU: Adjust the output level for
each sound tone mode.
-6SHHGGHSHQGHQWYRO: Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE

['HSHQGLQJRQYHKLFOHPRGHOVRU
VSHFLILFDWLRQVDYDLODEOHRSWLRQVPD\
YDU\

['HSHQGLQJRQWKHV\VWHPRU
DPSOLILHUVSHFLILFDWLRQVDSSOLHGWR
\RXUYHKLFOHDYDLODEOHRSWLRQVPD\
YDU\

[0RGHSRSXS: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.

['DWH7LPH: You can change the
date and time that are shown on the
system display.
-6HWGDWH: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
-7LPHIRUPDW: Select to display time
in the 12 hour format or the 24 hour
format.
-'LVSOD\3RZHU2II: Set to display
the clock when the system power
is off.

[/DQJXDJH: You can change the display
language.

5-111
05
'$%0RGH
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [0(18&/2&.] button on the
control panel to access the following
menu options:

[7UDIILFDQQRXQFHPHQW: Activate or
deactivate traffic announcements.
Announcements and programmes will
be received automatically if available.

[/LVW: Display all available radio
stations.

[6FDQ: The system searches for radio
stations with strong radio signals
and plays each option for about five
seconds.

[6RXQGVHWWLQJV: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
-%DODQFH: Select a location where
sound will be concentrated in the
vehicle. Select %DODQFH, turn the
[781(] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select &HQWUH.
-(TXDOLVHU: Adjust the output level for
each sound tone mode.
-6SHHGGHSHQGHQWYRO: Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE

['HSHQGLQJRQYHKLFOHPRGHOVRU
VSHFLILFDWLRQVDYDLODEOHRSWLRQVPD\
YDU\

['HSHQGLQJRQWKHV\VWHPRU
DPSOLILHUVSHFLILFDWLRQVDSSOLHGWR
\RXUYHKLFOHDYDLODEOHRSWLRQVPD\
YDU\

[0RGHSRSXS: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.

['DWH7LPH: You can change the
date and time that are shown on the
system display.
-6HWGDWH: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
-7LPHIRUPDW: Select to display time
in the 12 hour format or the 24 hour
format.
-'LVSOD\3RZHU2II: Set to display
the clock when the system power
is off.

[/DQJXDJH: You can change the display
language.

5-113
05
6DYLQJUDGLRVWDWLRQV
You can save your favorite radio stations
and listen to them by selecting them
from the preset list.
Saving the current radio station
Whilst listening to the radio, press and
hold the desired number button on the
control panel.

[The radio station you are listening to
will be added to the selected number.

[To save the next page of the preset
list, press the [FAV] button.
NOTICE

[ <RXFDQVDYHXSWRUDGLRVWDWLRQVLQ
HDFKPRGH

[ ,IDVWDWLRQLVDOUHDG\VDYHGWRWKH
VHOHFWHGSUHVHWQXPEHUWKHVWDWLRQ
ZLOOEHUHSODFHGE\WKHVWDWLRQ\RX
DUHOLVWHQLQJWR
Using the auto save function
You can search for radio stations in your
area where there is a strong signal. The
results of your search can be saved to
the preset list automatically.
1. From the radio screen, press the
[0(18&/2&.] button on the control
panel.
2. When the option selection window
displays, turn the [781(] knob to
select Autostore, and then press the
knob.
/LVWHQLQJWRVDYHGUDGLRVWDWLRQV
)0$00RGH
1. Confirm the preset number for the
radio station you want to listen to.

[To view the next page of the preset
list, press the [FAV] button.
2. On the control panel, press the
desired number button.

[Alternatively, push the Up/Down
lever on the steering wheel to
change the station.

Driver assistance system
7-66
OTM070111E
(1) Manual Speed Limit Assist enabled
indicator
(2) Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist will operate
(set speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
System operation
To set speed limit
OBC3070022
1. Press and hold Driving Assist ()
button at the desired speed. The
Manual Speed Limit Assist enabled
(
) indicator will illuminate on
the cluster.
0$18$/63(('/,0,7$66,67

07
7-67
OCN7060143
OCN7060144
2. Push the + switch up or - switch
down, and release it at the desired
speed.
Push the + switch up or - switch down
and hold it. The speed will increase or
decrease to the nearest multiple of ten
(multiple of five in mph) at first, and
then increase or decrease by 5 mph
(10 km/h).
OTM070203E
3. The set speed limit will be displayed
on the cluster.
If you would like to drive over the
preset speed limit, depress the
accelerator pedal beyond the pressure
point to activate the kickdown
mechanism.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
Information

Driver assistance system
7-68
To temporarily pause Manual Speed
Limit Assist
OCN7060063
[A] : Type A, [B] : Type B
Push the switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Manual Speed
Limit Assist enabled (
) indicator
will stay on.
To resume Manual Speed Limit
Assist
OCN7060145
To resume Manual Speed Limit Assist
after the function was paused, push the
+, -,
switch.
If you push the + switch up or – switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the
switch, vehicle
speed will resume to the preset speed.

07
7-83
To temporarily pause Cruise Control
OBC3070029
Cruise Control will be paused when:

[Depressing the brake pedal.

[Pushing the
button.

[Shifting the gear to N (Neutral).

[Decreasing vehicle speed to less than
approximately 20 mph (30 km/h).

[ESC (Electronic Stability Control) is
operating.

[Downshifting to the 2nd gear when in
Manual Shift mode.
The set speed will turn off but the Cruise
(
) indicator will stay on.
To resume Cruise Control
OBC3070030
Push the +, - switch or button.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the
button, vehicle
speed will resume to the preset speed.
Vehicle speed must be above 20 mph
(30 km/h) for the function to resume.

Driver assistance system
7-88
OBC3070072
To decrease speed

[Push the - switch down and release it
immediately. The cruising speed will
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.

[Push the - switch down and hold it
whilst monitoring the set speed on
the cluster. The cruising speed will
decrease by 10 km/h or 5 mph each
time the switch is operated in this
manner.
Release the switch at the speed you
want to maintain. You can set the
speed to 20 mph (30 km/h).
OBC3070073
To temporarily cancel Smart Cruise
Control
Press the switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
OBC3070074
To resume Smart Cruise Control
To resume Smart Cruise Control after
the function was canceled, push the +, -
or
switch.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the
switch, vehicle
speed will resume to the preset speed.
WARNING
Check the driving condition before
using the switch. Driving speed
may sharply increase or decrease when
you press the
switch.

Driver assistance system
7-104
Limitations of Navigation-based
Smart Cruise Control
Navigation-based Smart Cruise Control
may not operate normally under the
following circumstances:

[The navigation is not working properly

[Speed limit and road information in
the navigation is not updated

[The map information and the actual
road is different because of real-time
GPS data or map information error

[The navigation searches for a route
whilst driving

[GPS signals are blocked in areas such
as a tunnel

[The navigation is updated whilst
driving

[Map information is not transmitted
due to infotainment system's
abnormal operation

[A road that divides into two or more
roads and joins again

[The driver goes off the route set in the
navigation

[The route to the destination is
changed or canceled by resetting the
navigation
[The vehicle enters a service station or
rest area

[The speed limit of some sections
changes according to the road
situations

[Android Auto or Car Play is operating

[The navigation cannot detect the
current vehicle position (ex: elevated
roads including overpass adjacent to
general roads or nearby roads exist in
a parallel way)

[The navigation is being updated whilst
driving

[The navigation is being restarted
whilst driving

[There is bad weather, such as heavy
rain, heavy snow, etc.

[Driving on a road under construction

[Driving on a road that is controlled

[Driving on a road that is sharply
curved