BUMPER HYUNDAI I20 2023 Owner's Guide

9-80
Maintenance
NOTICE
If you park your vehicle near a stainless
steel sign or glass facade building, the
vehicle’s exterior plastic parts such
as a bumper, spoiler, garnish, lamp
or outside rearview mirror might be
damaged due to sunlight reflected
from the sign or building. To prevent
damage of the exterior plastic parts,
you should avoid parking in areas
where light may be reflected or use a
car cover. (The exterior plastic parts
applied to your vehicle may vary.)
Exterior care
Exterior general caution
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warning and
caution statements that appear on the
label.
Finish maintenance
:DVKLQJ
To help protect your vehicle’s finish
from rust and deterioration, wash it
thoroughly and frequently at least once
a month with lukewarm or cold water.
If you use your vehicle for off-road driving,
you should wash it after each off-road trip.
Pay special attention to the removal of any
accumulation of salt, dirt, mud, and other
foreign materials. Make sure the drain
holes in the lower edges of the doors and
rocker panels are kept clear and clean.
Insects, tar, tree sap, bird droppings,
industrial pollution and similar deposits
can damage your vehicle’s finish if not
removed immediately.
Even prompt washing with plain water
may not completely remove all these
deposits.
A mild soap, safe for use on painted
surfaces, may be used.
After washing, rinse the vehicle
thoroughly with lukewarm or cold water.
Do not allow soap to dry on the finish.
NOTICE

[ 'RQRWXVHVWURQJVRDSFKHPLFDO
detergents or hot water, and do not
wash the vehicle in direct sunlight
or when the body of the vehicle is
warm.

[ %HFDUHIXOZKHQZDVKLQJWKHVLGH
windows of your vehicle.
Especially, with high-pressure water,
water may leak through the windows
and wet the interior.

[ 7RSUHYHQWGDPDJHWRWKHSODVWLF
parts and lamps, do not clean
with chemical solvents or strong
detergents.
WARNING
Wet brakes
After washing the vehicle, test the
brakes whilst driving slowly to see if
they have been affected by water. If
braking performance is impaired, dry
the brakes by applying them lightly
whilst maintaining a slow forward
speed.
+LJKSUHVVXUHZDVKLQJ

[ :KHQXVLQJKLJKSUHVVXUHZDVKHUV
make sure to maintain sufficient
distance from the vehicle.
Insufficient clearance or excessive
pressure can lead to component
damage or water penetration.

[ 'RQRWVSUD\WKHFDPHUDVHQVRUVRU
its surrounding area directly with a
high pressure washer. Shock applied
from high pressure water may cause
the device to not operate normally.

[ 'RQRWEULQJWKHQR]]OHWLSFORVHWR
boots (rubber or plastic covers) or
connectors as they may be damaged
if they come into contact with high
pressure water.
APPEARANCE CARE