Window HYUNDAI IONIQ 6 2023 User Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: IONIQ 6, Model: HYUNDAI IONIQ 6 2023Pages: 582, PDF Size: 10.77 MB
Page 202 of 582
Convenience Features
5-24
Information When the door handle or the keyhole freeze
and do not open, lightly tap or indirectly warm
(for example, hand temperature) the keyhole.
Since the smart key and the mechanical key
are separated, always carry the mechanical
key in case the vehicle battery and the smart
key battery are discharged.
In case of an emergency
B5003103
Doors without an outside key hole can be
locked as follows:
1. Open the door.
2. Insert the key into the emergency door lock hole and turn the key to the lock
position.
3. Close the door securely.
Information If the electrical power to door lock switch is
not operating (for example, discharged
vehicle battery) and the trunk is closed, you
cannot open the trunk until power is restored.
WARNING • Always close and lock the doors while the vehicle is moving. If the doors are
unlocked, the risk of being thrown from
the vehicle in a collision increases. • Do not pull the inner door handle of the
driver’s or passenger’s door while the
vehicle is moving.
WARNING Do not leave the elderly, children, or
animals unattended in your vehicle. An
enclosed vehicle can become extremely
hot and the elderly, unattended children
or animals who cannot escape the vehicle
may be seriously injured or killed.
WARNING Always park your vehicle properly.
Depress the brake pedal, change the gear
to P (Park), apply the parking brake, press
the Start/Stop button to the OFF position,
close all windows, lock all doors, and
always take the keys with you.
WARNING Be careful when opening doors and
watch for vehicles, motorcycles, bicycles,
or pedestrians approaching the vehicle to
prevent serious injury or death.
Information To exit the vehicle if the power door lock does
not function:
• Operate the door unlock feature repeatedly (both electronic and manual) while
simultaneously pulling on the door handle.
• Operate the other door locks and handles.
• Lower the driver’s front window and use the mechanical key to unlock the door from
outside.
Hyundai_CE_en_US.book Page 24
Page 206 of 582
Convenience Features
5-28
Rear Occupant Alert
if equipped
(ROA)
Rear Occupant Alert is provided to
prevent a driver from leaving a vehicle
with the rear passenger left in the vehicle.
System Setting
To use Rear Occupant Alert, it can be
enabled from the Settings menu in the
infotainment system.
Select Setup > Vehicle > Convenience >
Rear Occupant Alert .
Information The infotainment system may change after
software updates. For more information, refer
to the user’s manual provided in the
infotainment system and the quick reference
guide.
System Operation
• First alert
When you turn off the vehicle and open
the driver’s door after opening and
closing the rear door or trunk, the
‘Check rear seats for passengers and
belongings ’ warning message appears
on the instrument cluster.
• Second alert (if the sensor equipped) After the first alert, the second alert
operates when any movement is
detected in the vehicle after the driver’s
door is closed and all the doors are
locked. The horn sounds about 25
seconds. If the system continues to
detect a movement, the alert operates
up to 8 times.
Unlock the doors with the smart key to
stop the alert. • The system detects movement in the
vehicle for 10 minutes after the door is
locked.
Information • The second alert is activated only after the prior activation of the first alert.
• The second alert activates only when the sensor is equipped in the vehicle.
System precautions
• Make sure that all the windows are closed. If the window is open, the alert
may occur when the sensor has
detected any movement (for example,
wind or bugs).
Sensor
B5003803
• If you do not want to use Rear Occupant Alert, press the 'OK' switch
on the steering wheel when the first
alert appears and the second alert is
deactivated once.
Instrument cluster
OJX1059019L
$ I F D L S F B S T F B U T
G P S Q B T T F O H F S T P S C F M P O H J O H T
" M B S N 0 G G
Hyundai_CE_en_US.book Page 28
Page 213 of 582
5
5-35
wheel will turn on and off depending on
the outside temperature.
NOTICE [ ' R Q R W L Q V W D O O D Q \ F R Y H U R U D F F H V V R U L H V R Q W K H V W H H U L Q J Z K H H O W R S U H Y H Q W
G D P D J H W R W K H V W H H U L Q J Z K H H O K H D W H U
V \ V W H P
[ ' R Q R W V W U L N H W K H V W H H U L Q J Z K H H O V X U I D F H Z L W K D V K D U S S R L Q W H G R E M H F W 7 K L V P D \
G D P D J H W K H K H D W L Q J H O H P H Q W L Q W K H
V W H H U L Q J Z K H H O
[ ' R Q R W F O H D Q W K H V W H H U L Q J Z K H H O V X U I D F H X V L Q J W K H I R O O R Z L Q J S U R G X F W V
2 U J D Q L F V R O Y H Q W V V X F K D V W K L Q Q H U D O F R K R O D Q G J D V R O L Q H
& K H P L F D O S U R G X F W V V X F K D V O H D W K H U F O H D Q H U F R D W L Q J D J H Q W D Q G Z D [
Mirrors
Inside Rearview Mirror
Before driving your vehicle, check to see
that your inside rearview mirror is
properly positioned. Adjust the rearview
mirror so that the view through the rear
window is properly centered.
WARNING Make sure your line of sight is not
obstructed. Do not place objects on the
rear seat or in the cargo area that may
interfere with your vision through the rear
window.
WARNING To prevent serious injury during an
accident or deployment of the airbag, do
not modify the rearview mirror and do not
install a wide mirror.
WARNING NEVER adjust the mirror while driving.
This may cause loss of vehicle control
resulting in an accident.
NOTICE : K H Q F O H D Q L Q J W K H P L U U R U X V H D S D S H U
W R Z H O R U V L P L O D U P D W H U L D O G D P S H Q H G Z L W K
J O D V V F O H D Q H U ' R Q R W V S U D \ J O D V V F O H D Q H U
G L U H F W O \ R Q W K H P L U U R U D V W K L V P D \ F D X V H
W K H O L T X L G F O H D Q H U W R H Q W H U W K H P L U U R U
K R X V L Q J
Hyundai_CE_en_US.book Page 35
Page 224 of 582
Convenience Features
5-46
Windows
A5008101(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
12
3
3
7
6
5
5
6
4
4
Hyundai_CE_en_US.book Page 46
Page 225 of 582
5
5-47
Power Windows
The Start/Stop button must be in the ON
position to be able to raise or lower the
windows. The front door window power
window switch is located on the center
console along with the power window
lock button which can block the
operation of rear passenger windows. The
power window switch for the rear door
windows are on the rear doors. The power
windows will operate for about 3 minutes
after the Start/Stop button is in the ACC
or OFF position. However, if the front
doors are opened, the power windows
will not operate even within the 3 minute
period.
Window opening and closing
B5008201
To open:
Press the window switch down to the first
detent position (5). Release the switch
when you want the window to stop.
To close:
Pull the window switch up to the first
detent position (5). Release the window
switch when you want the window to
stop.
Auto up/down window
Pressing the power window switch
momentarily to the second detent
position (6) completely lowers or lifts the
window even when the switch is released.
To stop the window at the desired
position while the window is in operation, pull up or press down and release the
switch.
WARNING • Do not leave the vehicle turned on (
indicator on) and the key in your vehicle
with unsupervised children.
Unattended children could operate the
window, which could result in serious
injury.
• Do not extend your head, arms, body parts or objects outside the window
while driving.
Resetting the power windows
If the power windows do not operate
normally, the automatic power window
system must be reset as follows:
1. Press the Start/Stop button to the ON position.
2. Close the window and continue pulling up on the power window switch for at
least one second.
If the power windows do not operate
properly after resetting, have the system
inspected by an authorized HYUNDAI
dealer.
WARNING The automatic reverse feature doesn’t
activate while resetting the power
window system.
6
5
5
6
Hyundai_CE_en_US.book Page 47
Page 226 of 582
Convenience Features
5-48
Automatic reverse
B5008202
If a window senses any obstacle while it is
closing automatically, it will stop and
lower about 12 in. (30 cm) to allow the
object to be cleared.
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower about 1 in.
(2.5 cm).
If the power window switch is pulled up
continuously again within 5 seconds after
the window is lowered by the automatic
window reverse feature, the automatic
window reverse will not operate.
Information The automatic reverse feature is only active
when the “Auto Up” feature is used by fully
pulling up the switch to the second detent.
WARNING Make sure body parts or other objects are
safely out of the way before closing the
windows to avoid injuries or vehicle
damage.
Objects less than 0.16 in. (4 mm) in
diameter caught between the window
glass and the upper window channel may
not be detected by the automatic reverse
window and the window will not stop and
reverse direction.
Power window lock button
B5008203
The driver can disable the power window
switches on the rear passenger doors by
pressing the power window lock button.
When the power window lock button is
pressed:
• The driver’s master control can operate all the power windows.
• The front passenger’s control can operate the front passenger’s power
window.
• The rear passenger’s control cannot operate the rear passengers’ power
window.
WARNING Do not allow children to play with the
power windows. Keep the driver’s door
power window lock button in the LOCK
position. Serious injury or death can result
from unintentional window operation by
a child.
NOTICE [ 7 R S U H Y H Q W S R V V L E O H G D P D J H W R W K H S R Z H U Z L Q G R Z V \ V W H P G R Q R W R S H Q R U
F O R V H W Z R Z L Q G R Z V R U P R U H D W W K H V D P H
W L P H 7 K L V Z L O O D O V R H Q V X U H W K H O R Q J H Y L W \
R I W K H I X V H
[ 1 H Y H U W U \ W R R S H U D W H W K H P D L Q V Z L W F K R Q W K H G U L Y H UT V G R R U D Q G W K H L Q G L Y L G X D O
G R R U Z L Q G R Z V Z L W F K L Q R S S R V L W H
G L U H F W L R Q V D W W K H V D P H W L P H , I W K L V L V
Hyundai_CE_en_US.book Page 48
Page 227 of 582
5
5-49
done, the window will stop and cannot
be opened or closed.
if equipped
Remote window opening function
Type A
B5008301Type B
B5008302
Press and hold the Door Unlock (1) button
on the smart key for more than 3 seconds
and the windows move down after the
doors are unlocked. Window movement
stops when you release the door unlock
button.
Information • The remote window opening function will be operated only with the Safety Power
Windows equipped.
• The remote window opening function may abruptly stop when you move away from
your vehicle during operation. Stay in close
proximity from your vehicle, while
monitoring the window movement.
• Please be aware that the doors unlock when the windows are opened using the remote
window open function.
1
1
Hyundai_CE_en_US.book Page 49
Page 264 of 582
Convenience Features
5-86
Face-Level (B, D)
Air flow is directed toward the upper body
and face. Additionally, each outlet can be
controlled to direct the air discharged
from the outlet.
Bi-Level (B, C, D, E)
Air flow is directed towards the face and
the floor.
All Level (A, B, C, D, E, F)
Air flow is directed toward the face, the
floor and the windshield.
Floor-Level (A, C, D, E)
Most of the air flow is directed to the
floor, with a small amount of the air being
directed to the windshield and side
window defrosters.
Floor/Defrost-Level (A, C, D, E)
Most of the air flow is directed to the floor
and the windshield with a small amount
directed to the side window defrosters.
Defroster-Level (A, D)
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.Front windshield defroster
B5020003
Defrost-level (A, D)
Press the icon, and the indicator light will
illuminate and the windshield defroster
indicator will appear on the climate
control panel.
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.
When Defogging logic is enabled, Fresh
mode is selected and air conditioning is
selected according to outside
temperature.
If the icon is pressed again, the indicator
light will turn off and the previous settings
will be selected.
Hyundai_CE_en_US.book Page 86
Page 267 of 582
5
5-89
WARNING • Continued use of the climate control system operation in Recirculation
mode for a prolonged period of time
may cause drowsiness to the
occupants in the cabin. This may lead to
loss of vehicle control which may lead
to an accident.
• Continued use of the climate control system operation in Recirculation
mode with the air conditioning OFF
may allow humidity to increase inside
the cabin. This may cause
condensation to accumulate on the
windshield and obscure visibility.
• Do not sleep in your vehicle or remain parked in your vehicle with the
windows up and either the heater or the
air conditioning ON for prolonged
periods of time. Doing so may increase
the levels of carbon dioxide in the cabin
which may lead to serious injury or
death.
Fan speed control
Climate control panel
B5020012Infotainment system
B5020013
The fan speed can be set to the desired
speed by adjusting the icon in the
climate control panel.
More air is delivered with higher fan
speeds.
Pressing and holding the icon turns off
the fan.
Information To help improve microphone voice input
sound, fan speed may automatically slow
down for a couple of minutes when you
activate voice recognition or hands free.
NOTICE 2 S H U D W L Q J W K H I D Q Z K H Q W K H 6 W D U W 6 W R S
E X W W R Q L V L Q W K H 2 ) ) S R V L W L R Q F R X O G F D X V H
W K H E D W W H U \ W R G L V F K D U J H 2 S H U D W H W K H I D Q
Z K H Q W K H Y H K L F O H L V U X Q Q L Q J
Hyundai_CE_en_US.book Page 89
Page 269 of 582
5
5-91
System Operation
Cooling/Ventilation
1. Select the Face Level ( ) mode in the infotainment system.
2. Set the air intake control to fresh or recirculation mode.
3. Set the temperature to the desired position.
4. Set the fan speed to the desired speed.
Heating
1. Select the Floor Level ( ) mode in the infotainment system.
2. Set the air intake control to fresh or recirculation mode.
3. Set the temperature to the desired position.
4. Set the fan speed to the desired speed.
5. If desired, turn the air conditioning ON with the temperature set high in order
to dehumidify the air before it enters
into the cabin.
If the windshield fogs up, select the Front
Defrost ( ) mode.
Operation Tips
• To keep dust or unpleasant fumes from entering the vehicle through the
ventilation system, temporarily set the
air intake control to the recirculation
mode. Return the control to the
Recirculation mode to the Fresh mode
when the unpleasant air outside has
diminished. This will help keep the
driver alert and comfortable.
• To help prevent the inside of the windshield from fogging, set the air
intake control to fresh mode and the
fan speed to the desired position, turn
on the air conditioning system, and
adjust the temperature control to the
desired temperature.
Air conditioning
Your HYUNDAI Vehicle air conditioning
system is filled with R-1234yf refrigerant.
1. Touch the 'CLIMATE' icon to display
climate information the infotainment
system.
2. Select 'A/C' icon (indicator light ON) in
the climate information screen to
activate the air-condition.
3. Set the temperature low.
4. Set the direction of air flow by touching the mode selection icon.
5. Touch the 'HEAT' icon (indicator light
OFF) to turn on the air-condition.
When maximum cooling is desired, set
the temperature to the lowest position,
then set the fan speed control to the
highest setting.
Air conditioning system operation tips
• If the vehicle has been parked in direct sunlight during hot weather, open the
windows for a short time to let the hot
air inside the vehicle escape.
• After sufficient cooling has been achieved, switch back from
recirculation mode to fresh mode.
• To help reduce moisture inside of the windows on rainy or humid days,
decrease the humidity inside the
vehicle by operating the air
conditioning system with the windows
and vision roof closed.
• Use the air conditioning system every month only for a few minutes to ensure
maximum system performance.
• If you operate air conditioner excessively, the difference between the
temperature of the outside air and that
of the windshield could cause the outer
surface of the windshield to fog up,
causing loss of visibility. In this case, set
the mode selection to the position
and fan speed control to the lowest
speed.
Hyundai_CE_en_US.book Page 91