turn signal Hyundai Santa Fe 2017 Quick Reference Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2017, Model line: Santa Fe, Model: Hyundai Santa Fe 2017Pages: 22, PDF Size: 9.7 MB
Page 5 of 22

FEATURES AND CONTROLS
SANTA FE
07 06
HYUNDAI
HEADLIGHTS AND FOG LIGHTS
Parking light positionAuto light positionHeadlight position
Headlight delayHeadlights may stay on for 15 seconds after exiting and locking
vehicle. Press remote lock button twice to turn headlights off.
See Owner’s Manual for more detail
.
High beam / Smart high beamFog light
Turn signals and lane change signals
Flashing headlights
PULL
PUSH
DRL OFF position
NOTETo turn off high beam, pull
the lever towards you.
Smart High Beam Function1. Select auto position on stalk.
2. Push lever forward to engage Auto High beam.
3. Push lever forward again to disengage.
DRIVER'S MAIN CONTROLSCENTRAL DOOR LOCK SWITCH
Outside rearview mirrors Press L (left) or R (right) on the
switch. Then adjust the mirror by
using the directional switch (
).
Power window lock switch Disables the power window
switches on the rear passenger
doors only.
Window auto down/upPress past detent to fully
open/close window.All doors will lock
All doors will unlock
Page 7 of 22

FEATURES AND CONTROLS
SANTA FE
11 10
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Home Link
INTERIOR LIGHTS
Push the lens
to turn the
map lamp on or off.
ON Map lamp and room lamp will turn on.OFF The lights stay off.DOOR Map lamp and room lamp
comes on when any door is opened.ROOM Map lamp and room lamp come on.
Press the switch to turn the light
on or off.
Map lampRoom lamp
54
Without sunroof
Without sunroof
4
5
1
1
Standard Programming To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside
buttons, HomeLink
® Channel 1 and Channel 3 Buttons, until the
indicator light begins to flash (after 20 seconds). Release both
buttons. Do not hold the buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
® buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
With sunroof
With sunroof
Page 8 of 22

FEATURES AND CONTROLS
SANTA FE
13 12
HYUNDAI
Warning and indicator lights
Tachometer
Speedometer
Turn signal indicatorsLCD display
Type AEngine temperature gaugeFuel gauge
Select "Trip Computer" mode by
pressing the MODE button
.
To change the trip mode as follows,
press the MOVE button
.
INSTRUMENT PANEL ILLUMINATIONTRIP COMPUTER
Move the control knob left or right to
adjust the brightness.
TRIP A
t 5 S J Q N F U F S <