lock INFINITI G35 2003 Owners Manual

WARNINGO Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident
you could be thrown into it and re-
ceive neck or other serious injuries.
You could also slide under the lap
belt and receive serious internal
injuries. O For most effective protection when
the vehicle is in motion, the seat
should be upright. Always sit well
back in the seat and adjust the seat
belt properly. See ªPrecautions on
seat belt usageº later in this section. FRONT MANUAL SEAT
ADJUSTMENT
WARNING O Do not adjust the driver's seat while
driving so full attention may be given
to vehicle operation. The seat may
move suddenly and could cause loss
of control of the vehicle.
O After adjustment, gently rock in the
seat to make sure it is securely
locked. SSS0133
SEATS
1-2 Seats, restraints and supplemental air bag systems
Z 02.7.29/V35-D/V5.0
X

Forward and backward Pull the lever up while you slide the seat
forward or backward to the desired position.
Release the lever to lock the seat in position.
Reclining To recline the seatback, pull the lever up and
lean back. To bring the seatback forward
again, pull the lever and move your body
forward. The seatback will move forward.
Seat lifter (if so equipped for driver's
seat) Turn either dial to adjust the angle and height
of the seat cushion to the desired position. SSS0169 SSS0168
Seats, restraints and supplemental air bag systems
1-3
Z 02.7.29/V35-D/V5.0
X

O To return the seat to its original position,
raise the seatback and lock the seat. The
seat will return to its original position.
O The front passenger seat will stop at 7 in
(175 mm) from its frontmost position to
retain space for the rear passenger.
CAUTIONO When returning the seat to its original
position, confirm the seat and seat-
back are locked properly.
O Be careful not to pinch your hand or
foot or bump your head when operat-
ing the walk-in seat. The seatback will
fold down rapidly.
O Do not put any objects in front or rear
of the seat. They may be pinched and
damaged.
The automatic forwarding and reversing will
not work or stop under the following condi-
tions:
O When the vehicle speed is above 4 MPH (7
km/h).
O When the seat belt is fastened. O When the selector lever is not in the P
(Park) position (Automatic transmission
model's driver's seat) or the parking brake
is not applied (Manual transmission mod-
el's driver's seat)
O When the door is closed.
O When the slide adjusting switch is oper-
ated.
Seat lifter (Driver's seat) Pull the switch up or push it down to adjust the
angle and height of the seat cushion. SSS0183
1-6 Seats, restraints and supplemental air bag systems
Z 02.7.29/V35-D/V5.0
X

Lumbar support (Driver's seat) The lumbar support feature provides lower
back support to the driver. Move the lever up
or down to adjust the seat lumbar area.
REAR SEAT ADJUSTMENT
Reclining (if so equipped) Pull the reclining lever and position the seat
back at the desired angle. Release the reclin-
ing lever after positioning the seat at the
desired angle.
WARNING O Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not be against your body. In an accident
you could be thrown into it and re-
ceive neck or other serious injuries.
You could also slide under the lap
belt and receive serious internal inju-
ries.
O For the most effective protection
when the vehicle is in motion, the
seat should be upright. Always sit
well back in the seat and adjust the
seat belt properly. See ªSeat beltsº
later in this section for precautions
on seat belt usage.
O After adjustment, check to be sure
the seat is securely locked.SSS0184 SSS0185
Seats, restraints and supplemental air bag systems
1-7
Z 02.7.29/V35-D/V5.0
X

Armrest (if so equipped) Pull the armrest forward until it is horizontal. Interior trunk access Sedan:
Pull the partition down to access the trunk from
the rear seat.
The partition can be locked using the mas-
ter key to prevent unauthorized access.
Remove the key while opening or closing the
partition. Otherwise, the partition may be dam-
aged. Coupe:
Pull the handle on the left side of the trunk and
push the seatback forward to access the trunk
from the rear seat.
WARNING Properly secure all cargo to help prevent
it from sliding or shifting. Do not place
cargo higher than the seatbacks. In a
sudden stop or collision, unsecured
cargo could cause personal injury.SSS0186 SSS0187 SSS0219
1-8 Seats, restraints and supplemental air bag systems
Z 02.7.29/V35-D/V5.0
X

When raising the seatback, make sure to lock
the seatback. The pop up knob on the seat-
back will latch in when the seatback is locked.
HEAD RESTRAINT ADJUSTMENT To raise the head restraint, just pull it up. To
lower, push the lock knob and push the head
restraint down.SSS0220 SSS0236 SSS0125
Seats, restraints and supplemental air bag systems
1-9
Z 02.7.29/V35-D/V5.0
X

tion, the supplemental air bag warning light
illuminates. The supplemental air bag warning
light will turn off after about 7 seconds if the
system is operational.
If any of the following conditions occur, the
supplemental front air bag, supplemental side
air bag and curtain side-impact air bag sys-
tems, and pre-tensioner seat belt need servic-
ing:
O The supplemental air bag warning light
remains on after approximately 7 seconds.
O The supplemental air bag warning light
flashes intermittently.
O The supplemental air bag warning light
does not come on at all.
Under these conditions, the supplemental front
air bags, supplemental side air bags, curtain
side-impact air bags and/or pre-tensioner seat
belt may not operate properly. They must be
checked and repaired. Take your vehicle to the
nearest authorized INFINITI retailer.
WARNINGIf the supplemental air bag warning light
is on, it could mean that the supplemen- tal front air bag, supplemental side air
bag, curtain side-impact air bag sys-
tems and/or pretensioner seat belt
will not operate in an accident.
Repair and replacement procedure The supplemental front air bags, supplemental
side air bags, curtain side-impact air bags and
pre-tensioner seat belts are designed to acti-
vate on a one-time-only basis. As a reminder,
unless it is damaged, the supplemental air bag
warning light will remain illuminated after infla-
tion has occurred. Repair and replacement of
these systems should be done only by an
authorized INFINITI retailer.
When maintenance work is required on the
vehicle, the supplemental front air bags, side
air bags, curtain side-impact air bags, related
parts and pre-tensioner seat belt should be
pointed out to the person conducting the main-
tenance. The ignition key should always be in
the LOCK position when working under the
hood or inside the vehicle. WARNING O Once the supplemental front air bag,
side air bag or curtain side-impact air
bag has inflated, the air bag module
will not function again and must be
replaced. Additionally, if any of the
supplemental front air bags inflate,
the activated pre-tensioner seat belt
must also be replaced. The air bag
module and pre-tensioner seat belt
system should be replaced by an au-
thorized INFINITI retailer. The air bag
modules and pre-tensioner seat belt
system cannot be repaired.
O The supplemental front air bag and
side air bag, curtain side-impact air
bag systems and pre-tensioner seat
belt system should be inspected by
an authorized INFINITI retailer if there
is any damage to the front end or side
portion of the vehicle.
O If you need to dispose of these
supplemental systems or scrap the
vehicle, contact an authorized
INFINITI retailer.
1-24 Seats, restraints and supplemental air bag systems
Z 02.7.29/V35-D/V5.0
X

Fastening the seat belts 1. Adjust the seat.
2. Slowly pull the seat belt out of the retractor
and insert the tongue into the buckle until it
clicks.
The retractor is designed to lock during a
sudden stop or on impact. A slow pulling
motion will permit the belt to move, and
allow you some freedom of movement in
the seat.
If the seat belt cannot be pulled from its fully
retracted position, firmly pull the belt and re-
lease it. Then smoothly pull the belt out of the
retractor. 3. Position the lap belt portion low and snug
on the hips as shown.
4. Pull the shoulder belt portion toward the
retractor to take up extra slack.
The front passenger and rear seat belts have a
cinching mechanism for child restraint installa-
tion. It is referred to as the automatic locking
mode.
When the cinching mechanism is activated the
seat belt cannot be withdrawn again until the
seat belt tongue is detached from the buckle
and fully retracted. For additional information,
see ªChild restraintsº later in this section. The automatic locking mode should be
used only for child restraint installation.
During normal seat belt use by a passen-
ger, the locking mode should not be acti-
vated. If it is activated it may cause uncom-
fortable seat belt tension.
WARNING When fastening the seat belts, be certain
that seatbacks are completely secured
in the latched position. If they are not
completely secured, passengers may be
injured in an accident or sudden stop.SSS0102 SSS0061
1-30 Seats, restraints and supplemental air bag systems
Z 02.11.1/V35-D/V5.0
X

Unfastening the seat belts To unfasten the belt, press the button on the
buckle. The seat belt will automatically retract.
Checking seat belt operation Your seat belt retractors are designed to lock
belt movement using two separate methods:
O when the belt is pulled quickly from the
retractor.
O when the vehicle slows down rapidly.
You can check their operation as follows:
O grasp the shoulder belt and pull quickly forward. The retractor should lock and re-
strict further belt movement.
If the retractor does not lock during this check
or if you have any questions about belt opera-
tion, see your INFINITI retailer.
Shoulder belt height adjustment
(For Sedan front seats) The shoulder belt anchor height should be
adjusted to the position best suited for you.
(See ªPrecautions on seat belt usageº earlier
in this section.) To lower, pull the release
button, and then move the shoulder belt an-
chor to the desired position, so that the belt
passes over the shoulder. Release the adjust-
ment button to lock the shoulder belt anchor
into position.
To raise, move the adjuster up to the desired
position while pulling the button.SSS0021 SPA0739
Seats, restraints and supplemental air bag systems
1-31
Z 02.7.29/V35-D/V5.0
X

INSTALLATION ON REAR SEAT
OUTBOARD OR CENTER
POSITIONS
WARNINGO The three-point belt on your vehicle is
equipped with a locking mode retrac-
tor which must be used when install-
ing a child restraint.
O Failure to do so will result in the child
restraint not being properly secured.
It could tip over or otherwise be un-
secured and cause injury to the child
in a sudden stop or collision.
Front facing When you install a child restraint in a rear
outboard or center seat, follow these steps:
1. Position the child restraint on the seat. It
can be placed in a front facing direction,
depending on the size of the child. Always
follow the restraint manufacturer's instruc-
tions. SSS0153 SSS0154
Seats, restraints and supplemental air bag systems
1-35
Z 02.7.29/V35-D/V5.0
X