windshield wipers INFINITI JX 2013 Quick Reference Guide

Windshield Wiper/Washer Switch
Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MIST) - One sweep operation of the
front wipers.

02 Auto (A UTO ) - Operates the speed-sensing
and rain-sensing (if so equipped) front wipers
intermittently. The intermittent speed can be
adjusted by twisting the time control ring

03 .

04 Low (LO) - front wipers operate at a continuous
low-speed.

05 High (HI) - front wipers operate at a continuous
high-speed.

06 Pull the lever toward you to activate the front
washer. The front wipers will operate several
times.
RAIN-SENSING AUTO WIPER S ySTEM (if so equipped)

The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper
speed depending on the rainfall and the vehicle speed.

To set the rain-sensing auto wiper system, push the lever down to the AUTO position
02 . The

wiper will sweep once while the ignition switch is in the ON position.

The rain sensor sensitivity level can be adjusted by turning the time control ring
03 toward the

front (high sensitivity) or toward the rear (low sensitivity).
REAR WINDSHIELD WIPER AND WASHER

07 Intermittent (INT) - Rear wiper operates
intermittently.

08 Low (ON) - Rear wiper operates at a continuous
low-speed.

09 Push the lever forward to activate the rear washer.
The rear wiper will operate several times.
for more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
04
06
07
08
05
09
MIST
OFFAUTO LO
HI
INT
ON
15
03