garage door opener INFINITI M 2010 Owners Manual

The light illuminates when the trunk lid is
opened. When the trunk lid is closed, the light
will turn off.
The light will turn off after 30 minutes when the
light remains illuminated to prevent the battery
from becoming discharged.HomeLinkT
Universal Transceiver provides a
convenient way to consolidate the functions of
up to three individual hand-held transmitters
into one built-in device.
HomeLinkT Universal Transceiver:
c Will operate most Radio Frequency (RF) de-
vices such as garage doors, gates, home and
office lighting, entry door locks and security
systems.
c Is powered by your vehicle's battery. No
separate batteries are required. If the vehi-
cle's battery is discharged or is discon-
nected, HomeLink Twill retain all program-
ming.
Once HomeLinkT Universal Transceiver is pro-
grammed, retain the original transmitter for fu-
ture programming procedures (Example: new ve-
hicle purchases). Upon sale of the vehicle, the
programmed HomeLinkT Universal Transceiver
buttons should be erased for security purposes.
For additional information, see ªPROGRAMMING
HomeLinkTº later in this section.WARNING
c Do not use HomeLinkT Universal Transceiver
with any garage door opener that lacks
safety stop and reverse features as required
by federal safety standards. (These stan-
dards became effective for opener models
manufactured after April 1, 1982.) A garage
door opener which cannot detect an object in
the path of a closing garage door and then
automatically stop and reverse, does not
meet current federal safety standards. Using
a garage door opener without these features
increases the risk of serious injury or death.
c During programming procedure, your garage
door or security gate may open or close.
Make sure that people and objects are clear
of the garage door, gate, etc. that you are
programming.
c Your vehicle's engine should be turned off
while programming HomeLinkT Universal
Transceiver.
PROGRAMMING HOMELINKT
To program your HomeLink TTransceiver to op-
erate a garage door, gate, or entry door opener,
home or office lighting, you need to be at the
same location as the device. Note: Garage door
openers (manufactured after 1996) have ªrolling
TRUNK LIGHT HOMELINKTUNIVERSAL TRANSCEIVER
Instruments and controls2-51
wÐ
Ð
05/14/09Ðpattie
X

code protectionº. To program a garage door
opener equipped with ªrolling code protectionº;
you will need to use a ladder to get up to the
garage door opener motor to be able to access
the ªsmart or learnº program button.
1. To begin, push and hold the 2 outerHomeLinkT buttons (to clear the memory)
until the indicator light
sAblinks (after 20
seconds). Release both buttons.
2. Position the end of the hand-held trans- mitter 1 to 3 in (20 to 70 mm) away from
the HomeLink Tsurface. 3. Using both hands, simultaneously push
and hold both the HomeLink Tbutton you
want to program and the hand-held trans-
mitter button.
DO NOT release the buttons until step 4 has
been completed.
SIC3612SIC3613
2-52Instruments and controls
wÐ
Ð
05/14/09Ðpattie
X

4. Hold down both buttons until the indica-tor light on HomeLinkT flashes, changing
from a ªslow blinkº to a ªrapid blinkº.
This could take up to 90 seconds. When
the indicator light blinks rapidly, both
buttons may be released. The rapidly
flashing light indicates successful pro-
gramming. To activate the garage door or
other programmed device, push and hold
the programmed HomeLink Tbutton - re-
leasing when the device begins to acti-
vate.
5. If the indicator light on HomeLinkT blinks
rapidly for two seconds and then turns
solid, HomeLink Thas picked up a ªrolling
codeº garage door opener signal. You will
need to proceed with the next steps to
train HomeLink T, completing the pro-
gramming may require a ladder and an-
other person for convenience.
6. Push and release the program button located on the garage door opener's mo-
tor to activate the ªtraining modeº. This
button is usually located near the an-
tenna wire that hangs down from the
motor. If the wire originates from under a
light lens, you will need to remove the
lens to access the program button.NOTE:
Once you have pushed and released the training
button on the garage door opener's motor and
the ªtraining lightº is lit, you have 30 seconds in
which to perform step 7. For convenience, use
the help of a second person to assist when per-
forming this step.
7. Quickly (within 30 seconds of pushingand releasing the garage door opener
program button) and firmly push and re-
lease the HomeLinkT button you've just
programmed. Push and release the
HomeLinkT button up to three times to
complete the training.
8. Your HomeLink Tbutton should now be
programmed.
To program the remaining HomeLink Tbuttons
for additional door or gate openers, follow
steps 2 through 8 only.
NOTE:
Do not repeat step 1 unless you want to ªclearº
all previously programmed HomeLinkT buttons.
If you have any questions or are having diffi-
culty programming your HomeLink Tbuttons,
please refer to the HomeLinkT web site at:
www.homelink.com or call 1-800-355-3515.
PROGRAMMING HOMELINKT FOR
CANADIAN CUSTOMERS
Prior to 1992, D.O.C. regulations required hand-
held transmitters to stop transmitting after 2
seconds. To program your hand-held transmit-
ter to HomeLinkT, continue to push and hold
the HomeLinkT button (note steps 2 through 4
under ªProgramming HomeLink Tº) while you
push and re-push (ªcycleº) your hand-held
transmitter every 2 seconds until the indicator
light flashes rapidly (indicating successful pro-
gramming).
NOTE:
If programming a garage door opener, etc., it is
advised to unplug the device during the ªcy-
clingº process to prevent possible damage to
the garage door opener components.
OPERATING THE HOMELINKT
UNIVERSAL TRANSCEIVER
HomeLinkT Universal Transceiver (once pro-
grammed) may now be used to activate the
garage door, etc. To operate, simply push the
appropriate programmed HomeLinkT Universal
Transceiver button. The red indicator light will
illuminate while the signal is being transmitted.
Instruments and controls2-53
wÐ
Ð
05/19/09Ðtbrooks
X

Engine specifications............9-8
If your vehicle overheats .........6-10
Starting the engine ............. 5-11
Engine coolant temperature gauge ......2-7
Entry/exit function, Automatic drive
positioner ....................3-26
Event Data Recorders (EDR) ..........9-23
Exhaust gas (carbon monoxide) ........5-2
F
F.M.V.S.S./C.M.V.S.S. certification label . . .9-12
Filter Air cleaner housing filter .........8-21
Changing engine oil and filter ......8-12
Flashers (See hazard warning flasher
switch) ......................2-33
Flat tire ......................6-2
Flat towing ...................9-19
Floor mat cleaning ................7-4
Fluid Automatic transmission fluid (ATF) . . . .8-15
Brake fluid ................. 8-16
Capacities and recommended fuel/
lubricants ..................9-2
Engine coolant ............... 8-10
Engine oil .................. 8-12
Power steering fluid ............8-16
Window washer fluid ...........8-17
FM-AM-SAT radio with Compact Disc (CD)
player/changer .................4-43
Fog light switch ................2-33
Front passenger air bag and status light . .1-47
Front power seat adjustment ..........1-2
Front seat, Front seat adjustment .......1-2Front-seat active head restraints
........1-8
Fuel Capacities and recommended fuel/
lubricants ...................9-2
Fuel economy ............... 5-46
Fuel economy information (display) ....4-9
Fuel octane rating .............9-4
Fuel recommendation ...........9-4
Fuel-filler cap ............... 3-20
Fuel-filler door ............... 3-20
Gauge ....................2-7
Fuses ......................8-25
Fusible links ..................8-26
G
Garage door opener, HomeLink TUniversal
Transceiver ...................2-51
Gascap .................... .3-20
Gauge .......................2-5
Gauge Engine coolant temperature gauge . . . .2-7
Fuel gauge ..................2-7
Odometer ..................2-6
Speedometer ................2-6
Tachometer .................2-6
General maintenance ..............8-2
Glove box ....................2-41
Hands-free phone system BluetoothT (with navigation system) . . .4-74
BluetoothT (without navigation
system) ................... 4-84 H
Hard-disk drive audio system
(Music Box) ...................4-50
Hazard warning flasher switch ........2-33
Head restraints ..................1-5
Headlights Aiming control (See adaptive front
lighting system (AFS)) ...........2-31
Bulb replacement ............. 8-31
Headlight switch .............. 2-29
Xenon headlights ............. 2-29
Headphones (See INFINITI mobile
entertainment system) .........4-64 , 4-72
Heated seats ..................2-34
Heater Automatic climate control .........4-29
Engine block heater ............5-57
HomeLinkT Universal Transceiver .......2-51
Hood release ..................3-17
Hook, Coat hooks ...............2-43
Horn .......................2-34
I
Ignition switch (Push-button) ..........5-8
Ignition switch, Automatic transmission
models ......................5-11
Immobilizer system ..............2-25
In-cabin microfilter ...............4-33
Indicator lights .................2-18
Indicator, Dot matrix display .........2-21
INFINITI mobile entertainment system
(MES) ......................4-62
10-3
wÐ
Ð
05/15/09Ðpattie
X