light INFINITI M 2013 Navigation Manual

Black plate (104,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-14
CANCELING/REACTIVATING ROUTE
A route that is already set can be canceled
at any time. If a route is deleted, the
destination and waypoints are also can-
celed.
It is also possible to reactivate a canceled
route.
INFO:
Canceling a route does not delete the destina-
tion and waypoint information completely.
“Delete destination”(page 4-24)
Canceling route
IRG01171. Push.
2. Highlight [Cancel Route] and push
.
IRG01183. A confirmation message is displayed.
Highlight [Yes] and push .
The route is canceled along with the
destination and waypoints.
Voice command
1. Push >located on the steering
wheel.
2. After the tone sounds, speak a com- mand.
To cancel a route:
"Cancel Route" (Alternate Command
Mode)
Reactivating route
IRG01191. Push .
2. Highlight [Resume Route] and push
.
IRG01203. A confirmation message is displayed.
Highlight [Yes] and push . The
canceled route is reactivated.
Condition: Language=NAM_English/

Black plate (105,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
INFO:
If a new route is set, the canceled route cannot
be reactivated.
EDITING ROUTE
IRG01211. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight the preferred condition and push .
4. Push to return to the previous
screen. Push

Black plate (106,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-16
IRG01231. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight [Add Destination] or [Add
Waypoint] and push .
If [Add Destination] is selected, the
current destination changes to a way-
point.
IRG01244. Set a destination or waypoint. The
method of searching for a destination
or waypoint is the same as the one for a destination.
“4. Setting destination”
IRG01255. The selected location is displayed at
the center of the map. Highlight [Add to
Route] after confirming the location and
push .
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.
“Editing/deleting destination or way-
point” (page 5-17)
IRG01266. Return to the [Edit Route] screen. Set
the route conditions as necessary.
7. Highlight [Calculate] and push .
The system will recalculate the routes.
After the route search is completed, the
display will automatically return to the
current location map screen.
INFO:
.
The prior route is automatically deleted.
.Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and is pushed.
Condition: Language=NAM_English/

Black plate (107,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Editing/deleting destination or
waypoint
The destination or waypoint that has
already been set can be modified or
deleted.
If a location is modified or deleted when a
suggested route is already set, the prior
suggested route will be recalculated ac-
cordingly.
IRG01271. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
IRG01284. Highlight [Move Dest.] to modify the
location and push .
“Moving location of destination”
(page 5-5)
IRG01295. Highlight [Delete] and push to
delete the location.
IRG01306. A confirmation message is displayed. Confirm the contents of the message,
highlight [Yes] and push . The
destination or waypoint is deleted from
the route. Return to the [Edit Route]
screen.
IRG01317. By highlighting [Calculate] and pushing
, the system will recalculate the
routes. After the route search is com-
pleted, the display will automatically
return to the current location map
screen.
5. Route guidance
5-17
Condition: Language=NAM_English/

Black plate (108,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-18
INFO:
.
If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
.Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and
waypoints
The order of a destination and waypoints
that have already been set can be changed.
IRG01321. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
IRG01334.Highlight [Change Order] and push
. A list of the destination and
waypoints is displayed.
IRG01345.Highlight a preferred destination or
waypoint to replace the previously
selected destination or waypoint and
push .
IRG01356. A message is displayed and the order
of the destination or waypoint is
changed.
IRG01367. By highlighting [Calculate] and pushing, the system will recalculate the
routes. After the route search is com-
plete, the display will automatically
return to the current location map
screen.
Condition: Language=NAM_English/

Black plate (109,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Changing route calculation condi-
tions
Each section of the route between way-
points can have different route calculation
conditions. After setting these conditions,
the entire route can be recalculated.
IRG01371. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight the preferred section of the route to the destination or waypoint
and push .
IRG01384. Highlight the preferred condition and
push .
Available conditions
: [Fastest Route]
: [Minimize Freeway]
: [Shortest Route]
IRG01395. The conditions have been changed and the display returns to the [Edit Route]
screen.
IRG01406. By highlighting [Calculate] and pushing, the system will recalculate the
routes. After the route search is com-
pleted, the display will automatically
return to the current location map
screen.
INFO:
.
The recalculated route may not be the
shortest route because the system priori-
tizes roads that are easy to drive for safety
reasons.
.If the route conditions are set from [Route
Settings], all sections in the route are
subject to the same route conditions. This
applies even if different route conditions
have been set for different sections in [Edit
Route].
5. Route guidance
5-19
Condition: Language=NAM_English/

Black plate (110,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-20
CONFIRMING ROUTE
When the suggested route is displayed
after calculation, the route information can
be confirmed or the suggested route can
be simulated.
Basic operation
1. Push.
IRG01412.Highlight [Route Info] and push
.
IRG0142
3. Highlight the preferred item and push
.
Available setting items . [Turn List]:
Displays the details of the suggested
route.
“Using turn list” (page 5-20)
. [Preview]:
The system will trace the planned route
going forward or in reverse.
“Using route preview” (page 5-21)
. [Simulation]:
Displays a simulation of the suggested
route. This function provides a detailed
image of the route with voice guidance.
“Confirming route by simulation”
(page 5-21)
. [Store Route]:
Stores a calculated route. A maximum
of 5 routes can be stored. Stored routes
can be easily retrieved and set as the
suggested route.
“Storing route” (page 6-5)
. [Map Scroll]:
Displays a map screen where the
location of the destination can be
confirmed. The same screen as when [Map Scroll]
is touched can be displayed with the
following operations:
—
Touching the map screen.
—Pushing the directional buttons except
for the up/down buttons (INFINITI con-
troller with directional buttons).
—Pushing the slide switch except in theupward/downward direction (INFINITI
controller without directional buttons).
Using turn list
IRG01431. Highlight [Turn List] and push .
2. The information (e.g., intersections) can be confirmed on the route to the
destination by scrolling the screen
pushing the up and down switches of
the main directional buttons, pushing
the slide switch upward or downward
or rotating the center dial.
Condition: Language=NAM_English/

Black plate (111,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. Push

Black plate (112,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-22
4. Pushto return to the previous
screen. Push

Black plate (113,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
route recalculation is performed.
Setting Auto Reroute
1. Push.
IRG01512.Highlight [Route Settings] and push
.
IRG01523. Highlight [Other Routing Choices] and
push .
IRG01534.Highlight [Auto Reroute] and push
. The indicator illuminates.
When the current location map screen
or route setting screen is displayed, the
system recalculates a route with the set
conditions.
“Setting conditions for route cal-
culation” (page 5-25)
SETTING DETOUR ROUTE
To detour from the suggested route, a
route detouring for a specified distance
can be calculated.
1. Push.
IRG01542. Highlight [Detour] and push .
IRG01553. Highlight a detour distance and push
.
After calculating the detour, the system
displays the detour route on the map.
INFO:
.
When the vehicle has deviated from the
suggested route, [Detour] cannot be se-
lected.
5. Route guidance
5-23
Condition: Language=NAM_English/