window INFINITI M 2013 Quick Reference Guide

13
07 FAN SPEED CONtROL BUtt
ONS


press the left button to decrease the fan speed or press the right
button to increase
the fan speed.
08 DEFROS
tING/DEFOGGING FRONt AND SIDE WINDOWS

press the defroster control button
to turn the system on.
the A/c automatically turns
on when the defroster mode is selected. this feature removes humidity from the air.

to defrost the front and side windows, set the temperature controls
03 and fan speed

controls
07 to their maximum settings.

09 DEFROS
tING REAR WINDOW AND OUt SIDE MIRRORS

push the rear window defroster switch
to turn the system on or off.

this function automatically turns off after approximately 15 minutes.
10 FORES
t BUtt ON

press the forest button
to activate the Forest Air® system.


this system’s settings will activate the breeze mode, the outside odor and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity control. the fan
speed and air flow is automatically set to the auto position.
11 INt
AkE AIR CONtROL BUtt ON


press the intake air control button to recirculate interior air inside the vehicle.
the
indicator light on the button will illuminate. this system is used to avoid certain
outside odors and helps to adjust the inside vehicle temperature more effectively.

the air recirculation mode cannot be activated when the air conditioner is in the front
defrost mode

.


press the intake air control button again to change the air circulation from the intake
air to the outside air. the
indicator light on the button will turn off.
12 OFF BUtt
ON

press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.

system guide
18
Trip Computer
when the
button
01 is pressed, the following
modes will appear on the dot matrix liquid crystal
display

02 :
• MPG – displays the current fuel consumption.
• MPG/MPh – displays the average fuel consumption
and speed since the last reset.
• tIME/MILES – displays the elapsed time and total
distance the vehicle has been driven since the
last reset.
• RANGE – displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
• OUtSIDE tEMP – displays the exterior air
temperature including a low temperature
warning feature.
• SEttING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
— press the

button
03 to cycle through the various setting modes.

— press the

button
01 to choose the selected menu.

• WARNING – If there are any.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System

with an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® hands-free phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.

A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
S yS teM OpeRA tInG tIpS

close all windows. Surrounding noises may interfere
with system operation and performance.

press the
or
button on the steering wheel to
activate voice recognition.

wait for the tone before speaking.

Begin speaking a command within 5 seconds of the tone.
03
01
02
Bluetooth® Controls
Microphone
*Some jurisdictions prohibit the use of cellular telephones while driving.