fuel type INFINITI M HYBRID 2013 Service And Maintenance Guide

quent replacement of Genuine Nissan
Long Life Antifreeze/Coolant (Blue)
should occur every 75,000 miles
(120,000 km) or 5 years, whichever
comes first. NOTE: Mixing any other
type of coolant or the use of non-
distilled water will reduce the recom-
mended service interval of the cool-
ant.
Hybrid Electronic Vehicle (HEV)
Inverter Coolant
Replace inverter coolant at the speci-
fied interval. The recommended ser-
vice interval of the factory-fill coolant
is 125,000 miles (200,000 km) or 15
years, whichever comes first. Subse-
quent replacement of Genuine Nissan
Long Life Antifreeze/Coolant (Blue)
should occur every 75,000 miles
(120,000 km) or 5 years, whichever
comes first. When adding or replacing
coolant, be sure to use only Genuine
Nissan Long Life Antifreeze/Coolant
(Blue) or equivalent with the propermixture. (Refer to the Owner’s Manual
to determine the proper mixture for
your area.)
NOTE: Mixing any other type of cool-
ant or the use of non-distilled water
will reduce the recommended service
interval of the coolant.
Engine Oil and Oil Filter
Replace engine oil and oil filter at the
specified intervals. For recom-
mended oil grade and viscosity refer
to Chapter 9 in your Owner’s Manual.
Engine Valve Clearance*
Inspect only if valve noise increases.
Adjust valve clearance if necessary.
Evaporative Emissions Control Vapor
Lines*
Check vapor lines and connections
for leaks or looseness. Tighten con-
nections or replace parts as neces-
sary.
Fuel Filter
Maintenance-free item (In-tank type
filter).
Fuel Lines*
Check the fuel hoses, piping and con-
nections for leaks, looseness, or de-
terioration. Tighten connections or re-
place parts as necessary.
Spark Plugs
Replace at specified intervals. Re-
placement Intervals for IPL models
differ from non-IPL models. Install
new plugs of the same type as origi-
nally equipped.
Chassis
and Body Maintenance:
Brake Lines and Cables
Visually inspect for proper installa-
tion. Check for chafing, cracks, dete-
rioration, and signs of leaking. Re-
place any deteriorated or damaged
parts immediately.
EXPLANATION OF SCHEDULED MAINTENANCE ITEMS
10