instrument panel INFINITI Q40 2015 Quick Reference Guide

*See your Owner’s Manual for information.
1 ADAPTIVE FRONT LIGHTING SYSTEM
(AFS) SWITCH*
2 INSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
3 HEADLIGHT AND TURN SIGNAL SWITCH
4 TRIP RESET SWITCH*
5 VEHICLE INFORMATION DISPLAY
6 WINDSHIELD WIPER AND
WASHER SWITCH
7 STEERING WHEEL SWITCHES
FOR AUDIO* / BLUETOOTH®
8 CRUISE CONTROL
9 PUSH BUTTON IGNITION SWITCH
10 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
11 TRUNK LID RELEASE SWITCH
12 INTELLIGENT KEY PORT
13 PARKING BRAKE
14 CONTROL PANEL DISPLAY
15 AUDIO SYSTEM
16 CLIMATE-CONTROL SYSTEM
17 PASSENGER AIRBAG INDICATOR LIGHT
18 HEATED SEAT SWITCHES*
Behind
steering wheel
Behind
steering wheel Behind
steering wheel
Behind
steering wheel
12
3
456
789
14
15
16
17
1818
1011
1213
1811809_15b_Infiniti_Q40_QRG_091014.indd 49/10/14 3:41 PM

6
first drive features
Seat Adjustments
POWER SEAT ADJUSTMENTS
To slide the seat forward or backward, push the switch

1 forward or backward.
To recline the seatback, push the switch
2
forward or backward.
SEAT LIFTER
To adjust the angle of the front portion or height of the
seat, push the front or rear end of the switch
1 up or down.
MANUAL LUMBAR SUPPORT (driver’s seat only)
To adjust the seat lumbar support, move the lever 3
forward or backward.
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)”
of your Owner’s Manual.
Trunk Lid Release
Use one of the following methods to open the trunk:
Push the trunk open request switch
1 for more than
1 second while carrying the INFINITI Intelligent Key
with you.

Press the trunk buttonHOLD on the Intelligent Key for
more than 1 second.





From inside the vehicle, push down on the trunk lid
release switch
2 on the instrument panel.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
1
1
2
2
3
1811809_15b_Infiniti_Q40_QRG_091014.indd 69/10/14 3:42 PM

8
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the position

1 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the
position
2 to turn on the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it is
light. The system will keep the headlights on for a period of time after\
you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AUTO position
3
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position
1 or
position
2.
HIGH BEAM SELECT
Push the headlight control switch forward 4 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position
to select the low beam. The blue indicator light will
extinguish.
Pull and release the headlight control switch 5 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
6
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
first drive features
45
6
2
3
1
1811809_15b_Infiniti_Q40_QRG_091014.indd 89/10/14 3:42 PM

12
USB (Universal Serial Bus) Connection Port/iPod® Interface
The USB port 1 is located in the center console
under the arm rest.
When a compatible USB memory device or iPod®
is plugged into the USB port , compatible audio
and video files stored on the device can be played
through the vehicle’s audio system and front display.
For more information, refer to the “ Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph
(40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/
OFF switch
1. The CRUISE indicator light in the
instrument panel will illuminate.
To set a cruising speed, accelerate the vehicle to the desired speed, pu\
sh the COAST/SET
switch
2 and release. The
CRUISE SET indicator light
in the instrument panel will illuminate.
Take your foot off the accelerator pedal. Your vehicle will maintain the\
set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
3. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch
2. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch
4.
To turn off cruise control, push the ON/OFF switch
1. The CRUISE indicator light
in the




instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1
2
34
1
first drive features
1811809_15b_Infiniti_Q40_QRG_091014.indd 129/10/14 3:42 PM

15
Bluetooth® System with Navigation (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1.

Press the PHONE button on the instrument panel or the

button on the steering wheel and select the “Connect
Phone” key.
2.


Initiate connecting from the phone.



•

The connecting procedure varies according to each

cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.



•

When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3.


When the connecting is complete, the screen will
return to the “Phone” menu display.
P

HONEBOOK SETUP
Depending on your cellular phone, the system may automatically download your cellular phone’s entire phonebook to the vehicle’s
Bluetooth
® system.
If the phonebook does not download automatically, the vehicle phonebook may be set for up to 1,000 entries.
To manually download entries:



1
. Press the
but ton and select the
“Quick Dial” key.



2

.

S

elect the “Add New” key at the top of the
display. There are dif ferent methods to
input a phone number. Select one of the
following options:



•


“

Copy from Call Histor y” to save a number from
the Outgoing, Incoming or Missed
Calls lists.



•


“

Copy from the Phonebook” to save a number
that has been downloaded from your handset
to the vehicle.



•


“

Enter Number by Keypad” to input the number
and name manually.
1811809_15b_Infiniti_Q40_QRG_091014.indd 159/10/14 3:42 PM