INFINITI Q50 2014 Infiniti Intouch

2. Getting Started
2-2
CONTROL BUTTONS AND FUNCTIONS
Infiniti InTouch controls the heater and air
conditioner, audio, RearView/Around
View
®Monitor, navigation system (if so
equipped), InTouch Apps, Bluetooth®
Hands-free phone etc., by using the upper
and lower display, INFINITI controller,
menu button and steering-wheel switch.
Designs and button layout may vary
depending on the specifications and the
model.
*1Steering-wheel switch“Steering-wheel switches”
(page 2-5)
*2Media Hub“Media Hub” (page 2-6)
*3Dual display“Dual Display” (page 2-2)
*4INFINITI controller“INFINITI controller” (page 2-5)
DUAL DISPLAY
Both displays can be operated with the
touch panel.
The upper touch screen display (upper
display) can display various information.
The lower touch screen display (lower
display) can be used for various opera-
tions.

*1Upper touch screen display (upper
display)
Display Information, view monitor sys-
tem, navigation (if so equipped).
“Upper touch screen display
(upper display)” (page 2-10)
“7. Monitor system”“9. Navigation”
*2Lower touch screen display (lower
display)
The lower display provides touchsc-
reen controls for various vehicle fea- tures including InTouch Apps, the
navigation system (if so equipped),
audio system and the heater and air-
conditioner system, etc.
“Lower touch screen display (low-
er display)
”(page 2-13)
*3Heater and air conditioner buttons
Allow you to control the heater and air
conditioner.
“Heater and air conditioner con-
trols” (page 3-3)
*4Lower display menu buttons
Push

2. Getting Started
2-4
The screen may become distorted by
strong magnetic fields.
Maintenance of display:
CAUTION!
.To clean the display, stop the vehicle in a
safe location.
. Clean the display with the ignition switch
in the OFF position. If the display is
cleaned while the ignition switch is in
the ON position, unintentional operation
may occur.
. To clean the display, never use a rough
cloth, alcohol, benzine, thinner and any
kind of solvent or paper towel with a
chemical cleaning agent. They will
scratch or deteriorate the panel.
. Do not splash any liquid such as water or
car fragrance on the display. Contact with
liquid will cause the system to malfunc-
tion.
.When cleaning the display, use the
exclusive cleaning cloth.
. Before cleaning, wipe away any sand or
dust from the surface of the display and shake out the exclusive cloth in order
to prevent damaging the display.
. If the display is heavily soiled, moisten
the exclusive cloth and then clean the
display. If the exclusive cloth is mois-
tened, be sure to dry it out sufficiently
before storing it. Color may be trans-
ferred to objects that it comes in
contact with.
. The exclusive cloth retains its cleaning
properties even if it is washed repeat-
edly.
. When washing the exclusive cloth, be
sure to rinse it thoroughly so that no
detergent remains.
. When ironing the exclusive cloth, iron
using a low temperature setting 176 to
248 8F (80 to 1208C).

INFINITI CONTROLLER
The INFINITI controller operates upper
display.
*1

2. Getting Started
2-6
setting.
*2:
Tilt to select an item on the screen or
adjust a setting. Push to enter the
selected item.
For models with navigation system, if
this button is pushed while a map is
displayed, the shortcut menu is dis-
played.
“ Upper touch screen display
(upper display)” (page 2-10)
Tilt up or down to operate audio
system, when the map or display view
is display on the upper screen.
“ Steering-wheel mounted audio
control buttons” (page 4-11)
*3<-+>(Volume control) :
Allows you to adjust the volume.
*4<> (TALK):
Push to enter the voice recognition
mode.
“Giving voice commands”
(page 10-2)
*5<> (PHONE):
Push to display the hands-free phone
operation screen.
When you receive a phone call, push this button to answer the call.
“5. Hands-Free Phone”
MEDIA HUB
The Media Hub is located in the center
console and consists of the USB/iPod®
interface, auxiliary input jacks and SD card
slot.
*1AUDIO IN (Auxiliary audio input) jack:
Connect an audio player that accepts a
1/4 in (3.5 mm) TRS connector (such
as an MP3 player etc.) to play music.
*2VIDEO IN (Auxiliary video input) jack:
Connect a video player to play a movie.
*3SD card slot
(models with navigation system):
Insert an SD card. Push the inserted
SD card in and release it to eject the
SD card from the slot. An SD card
containing map data is provided with
the vehicle of the system.
*4USB/iPod interface:
Connect to play media from an iPod,
iPhone or a USB memory.
When using Infiniti InTouch Apps with
iPhone, connect via USB cable.
Refer to your device manufacture’
s
owner information regarding the prop-
er use and care of the device.
CAUTION!
. Never insert foreign objects such as
coins into the SD card slot. Doing so
may result in a malfunction of the device.
. Do not apply overload to the SD card
when inserting it to the slot. Doing so
may result in a malfunction of the device.
. The SD card may be hot when it is
removed from the device. This does not
indicate a malfunction.
. Depending on size and shape of USB
device, the console lid may not fully
close. Do not force the console lid closed

as this may damage USB device.
NOTE:
.
Even when iPods or iPhones are connected
to both of the USB/iPod interfaces, the
system recognizes only one of the con-
nected iPods or iPhones at a time.
.Only one of the two connected USB devices
can be operated by the voice recognition
system.
.Do not remove the SD card containing map
data. If the SD card containing map data is
accidentally removed, reinserti the SD card
containing map data into the slot and place
the ignition switch in the OFF position.
STARTING SYSTEM
The system starts when the ignition switch
is pushed to the “ACC”or“ON” position.
START-UP SCREEN
For this system, when the ignition switch is
pushed to the “ACC”or“ON” position, the
start-up screen is displayed.
NOTE:
Do not keep the navigation system on with the
engine or the hybrid system stopped. Doing so
may discharge the vehicle battery (12V bat-
tery). When you use the navigation system,
always keep the engine or the hybrid system
running.
LOG-IN SCREEN
Three unique users can be recognized by
the vehicle, with personal settings linked
to the Intelligent Key assigned to each
user. A welcome message screen is dis-
played with the detected user’s name each
time the system starts.
“Fully customizable digital environ-
ment” (page 8-28)
When an Intelligent Key is used for the first
time, the vehicle will prompt the user to
create a new registration with a message on the lower display.
“User registration”
(page 8-28)
User selection
Upper display
1. The system starts when the ignition
switch is pushed to the “ON”position.
A welcome message screen is dis-
played.
2. Check the message that is displayed on the screen. If the name shown in the
welcome message is incorrect, touch
the guest icon or the icon with your
name.
2. Getting Started
2-7

2. Getting Started
2-8
TOUCH PANEL OPERATION
Basic touch panel operation methods are
explained here.. Touch
Select and execute the selected key on
the screen. .
Swipe
Menu screen pages will skip to the next
page.
. Drag
Drag up or down to scroll. You can scroll
up and down a list screen. Models with navigation system:
More various operations are possible for a
map screen. For detailed operations of the
map screen. Refer to the navigation sec-
tion.
“Operating with touch panel opera-
tion”
(page 9-7).

MENU SCREEN AND OPERATION METHOD
SCROLLING MENU ICON SCREEN
*1Touch [<] to scroll to the previous page.
*2Touch a preferred icon to execute a
function and display the next screen.
*3Touch [>] to scroll to the next page.
*4Touch [] to access the quick setting
menu screen
“Quick setting menu screen”
(page 8-27)
*5Indicates the position of the currently
displayed page.
*6Touch to display user list screen.“Fully customizable digital envir-
onment” (page 8-28) A swipe gesture can also be used to move
quickly between screens.
SCROLLING MESSAGE OR LIST
*1Drag the scroll bar up or down to scroll
the message or list up or down.
*2Touch a preferred item.
*3If a listed item name is not completely
displayed (due to length), touch [>]to
display the hidden part of the name.
*4Touch []or[] to scroll the
message or list one item at a time.
Touch [
]or[] to skip to the next
page.
SELECTING ITEM
When the item is touched, it is executed
and the next screen is displayed.
Touch [
] to return to the previous
screen.
ADJUSTING VOLUME AND SETTINGS
Set the volume and brightness.
Touch adjustment keys, such as [+]/[-], [L]/
[R], etc., to adjust each item. Each time a
key is touched, the indicator moves along
2. Getting Started
2-9

2. Getting Started
2-10
the bar.
HOW TO INPUT LETTERS AND NUM-
BERS
Character (letters and numbers)
input screen
Alphanumeric characters are entered using
the keyboard screen.
*1Touch a character on the displayed
keyboard. The selected character is
entered.
*2Entered characters are displayed here.
*3Touch [Delete] to delete the last
character entered.
Touch and hold [Delete] to delete all
the characters entered.
*4The symbol keys are displayed by
touching [Symbols]. The alphabet keys
are displayed by touching [A-Z].
*5Touch [Space] to enter a space.
*6Touch [OK] or [List] to finalize your
input.
INFO:
.
Touch [CAPS] to toggle uppercase and low-
ercase characters on the keyboard screen.
.Touch [ <]or[ >] to move the character input
position.
HOW TO OPERATE DUAL DISPLAY
UPPER TOUCH SCREEN DISPLAY
(upper display)
For operating the upper touch screen
display (upper display), touch the display
directly, push the steering-wheel switch or
operate using the INFINITI controller.
Shortcut menu (models with navi-
gation system)
The shortcut menu can be displayed on the
upper display. The display may differ
according to the map scrolling or the map
displaying the current position.
While the current vehicle location is
displayed on the map, push on
the INFINITI controller to display the short-
cut menu on the upper display.
The following options are available.

.Audio Source
. Audio List
. Call History
. Phonebook
. Nearby Places
. Stored Location
. View Settings
. Select Add/Edit
. (Blank)
While scrolling the map screen, push on the IFINITI controller to display the
following options.
. New Destination
. Show Current Location
. Stored Location .
Nearby Places
. Delete
Edit shortcut menu:
The following procedure can edit or sort
the shortcut menu.
1. Select [Select Add/Edit] to register a new item to the menu, or to change an
existing menu item.
2. Select preferred setting.
.[Select Sort] Change the order in which shortcut
menu items are shown.
.[Select Shortcut Items]Select items to be displayed in the
shortcut menu.
Display View Bar
Various information screens can be shown
on the upper display by selecting from the
display view bar. For models with navigation system:
Set display will be shown in addition to
the navigation map.
Push