air condition INFINITI Q50 2015 Quick Reference Guide

9
Active Lane Control (if so equipped)
Active Lane Control slightly corrects front tire angles and steering wheel torque, allowing
the driver to make fewer steering wheel corrections.

Active Lane Control is active when:
• The vehicle is driven at speeds of approximately 45 mph (70 km/h) and above.
• The Lane Departure Prevention and Active Lane Control systems are enabled in the
Settings menu.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Heated Steering Wheel (if so equipped)
The heated steering wheel system is designed to operate only when the surface
temperature of the steering wheel is below approximately 68°F (20°C). The steering wheel
heater will also turn off automatically after approximately 30 minutes.

To manually turn on the heated steering wheel, touch the steering wheel heater icon
1
within the CLIMATE control screen in the lower display. The indicator light will illuminate.
AUTOMATIC STEERING WHEEL HEATER

When turned on, the steering wheel heater will
automatically heat the steering wheel whenever
the temperature inside the vehicle compartment
is below approximately 68°F (20°C) at the time
of pushing the ignition to the ON position. The
temperature of the steering wheel will also
fluctuate while turned on.

To turn on the automatic steering wheel heater:
1. Press the MENU button just below the
lower display.
2. Touch the Settings key.
3. Touch the right arrow key
until you see Others.
Touch the Others key.
4. Touch Climate.
5. Touch Auto Steering Wheel Heater

2 to turn it on.
For more information, refer to the “Heater and air conditioner (section 3)” of your InTouch Owner’s Manual.
1
2
2045927_15c_Infiniti_Q50_QRG_071415.indd 97/14/15 3:39 PM

13
Heated Seats (if so equipped)
There are two ways to operate the heated seats:
1. Press the heated seat switch

1.
• Every press of the switch allows you to
cycle through the five different modes of
AUTO – High – Mid – Low – OFF.
2. While on the CLIMATE control screen on the lower
display, touch the left or right heated seat icon
2.
• The Left or Right Heater Settings screen is
displayed with a list of the five different modes of
AUTO – High – Mid – Low – OFF.
• The indicator light on the heated seat switch

1
will illuminate when the system is in AUTO – High – Mid – Low.
• While in AUTO, the heated seats will turn on and off automatically, depending on
temperature conditions in the vehicle compartment.
• To view which of the five modes the system is in, press the CLIMATE button

3. This
will bring up the CLIMATE control screen on the lower display. From here, you will see
the heated seat icons
2 for the driver’s and passenger’s side, and below the icon is
the mode the system is in currently.
For more information, refer to the “Heater and air conditioner (section 3)” of your InTouch Owner’s Manual.
2 2
3
1 1
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.

Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Press the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the desired positions
using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately
5 seconds and a buzzer will sound.
• The driver’s seat, steering column and outside mirror positions are now set to
your preferences.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
2045927_15c_Infiniti_Q50_QRG_071415.indd 137/14/15 3:39 PM

18
first drive features
8 INTAKE AIR CONTROL BUTTON

Pressing the intake air control button will cancel auto air recirculation 7
(if so equipped) until it is re-activated from the touch-screen (see above). Press the
intake air control button
to manually control whether the interior air is recirculated
or outside air is drawn into the vehicle. When the indicator light is on, interior air
is recirculated, outside odors are avoided and interior vehicle temperature is most
effectively maintained.

The air recirculation mode cannot be activated when the climate control system is in the
front defroster mode

or the front defroster and foot vent mode .
9 A/C KEY

Touch the A/C key to turn the air conditioner system on or off. This system helps cool
and dehumidify the air inside the cabin and defog the windows.
10 DUAL KEY

Touch to turn the passenger’s side temperature controls on or off. When the system
is on, the indicator light will illuminate. This function will allow the passenger’s side
temperature to be adjusted independently from the driver’s side by pressing the
passenger’s side temperature control buttons

3.
11 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS

Press the defroster button
to turn the system on. The A/C automatically turns
on when the defroster mode is selected. This feature removes humidity from the air.


To defrost the front and side windows, set the driver’s side temperature controls
2 and
fan speed controls 4 to their maximum settings.
12
DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS

Push the rear window and outside mirror defroster switch
to turn the system
on or off.

This function automatically turns off after approximately 15 minutes.
13 ON/OFF BUTTON

Press the ON/OFF button to turn the climate control system on or off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual and the “Heater and air
conditioner (section 3)” of your InTouch Owner’s Manual.
2045927_15c_Infiniti_Q50_QRG_071415.indd 187/14/15 3:39 PM