seat memory INFINITI Q50 HYBRID 2014 Owner's Manual

FRONT SEATS
Front power seat adjustment
Operating tips:
.The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 sec-
onds, then reactivate the switch.
. Do not operate the power seat switch
for a long period of time when the
INFINITI Direct Response Hybrid
®Sys-
tem is not running. This will discharge
the 12-volt battery.
See “Automatic drive positioner” (P.3-28)
for the seat position memory function (if so
equipped).
SSS1051
Forward and backward:
Moving the switch
*1forward or backward
will slide the seat forward or backward to
the desired position.
Reclining:
Move the recline switch
*2backward until
the desired angle is obtained. To bring the
seatback forward again, move the switch
*2forward.
The reclining feature allows adjustment of
the seatback for occupants of different
sizes for added comfort and to help obtain
proper seat belt fit. (See “Precautions on
seat belt usage” (P.1-10).) Also, the seat- back can be reclined to allow occupants to
rest when the vehicle is parked.
Safety
—Seats, seat belts and supplemental restraint system1-3

3-28Pre-driving checks and adjustments
SIC3869
VANITY MIRROR
To use the front vanity mirror, pull down
the sun visor and pull up the cover.The automatic drive positioner system has
two features:
.
Entry/exit function
. Memory storage
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s
seat and steering column will automati-
cally move when the shift lever is in the P
(Park) position. This allows the driver to get
into and out of the driver’s seat more
easily.
The driver’s seat will slide backward and
the steering wheel will move up when the
driver’s door is opened with the ignition
switch in the LOCK position.
The driver’s seat and steering wheel will
return to the previous positions when the
ignition switch is pushed to the ACC
position.
The driver’s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat
is at the exit position.
Cancel or activate entry/exit func-
tion
All the following conditions must be met
before cancelling or activating the entry/ exit function.
.
The ignition switch is placed in the
LOCK position.
. The entry/exit function is not in opera-
tion.
. The following switches are not oper-
ated.
— Seat memory switches
— Power seat switches
— Electric tilting/telescopic steering
wheel switch
The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
The indicator lights on the memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may illuminate after 5 seconds while
holding the SET switch. Keep the SET
switch pressed for more than 10 seconds
to turn on or off the entry/exit function.
The entry/exit function can also be acti-
vated or canceled if the [Lift Steering upon
Exit] or [Slide Driver Seat Back on Exit] key
is turned to ON or OFF in the [Settings]
menu on the lower display. (See the Infiniti
AUTOMATIC DRIVE POSITIONER (if so
equipped)

InTouch Owner’s Manual.)
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work though this function was set on
before. In such a case, after connecting the
battery or replacing with a new fuse, open
and close the driver’s door more than two
times after the ignition switch is turned
from the ON position to the LOCK position.
The entry/exit function will be activated.
JVP0240X
MEMORY STORAGE
Two positions for the driver’s seat, steering
column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.
1. Adjust the driver’s seat, steering col-umn and outside mirrors to the desired
positions by manually operating each
adjusting switch. For additional infor-
mation, see “Seats”(P.1-2),“Tilt/tele-
scopic steering” (P.3-24) and“Outside
mirrors” (P.3-26).
2. Push the SET switch and, within 5 seconds, push the memory switch (1
or 2) fully for at least 1 second.
The indicator light for the pushed
memory switch will stay on for approxi-
mately 5 seconds after pushing the
switch.
When the memory is stored in the
memory switch (1 or 2), a buzzer will
sound.
If memory is stored in the same
memory switch, the previous memory
will be deleted.
Confirming memory storage
.
Push the ignition switch to the ON
position and push the SET switch. If
the main memory has not been stored,
the indicator light will come on for
approximately 0.5 seconds. When the
memory has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
. If the 12-volt battery cable is discon-
nected, or if the fuse opens, the
memory will be canceled. In this case,
reset the desired position using the
previous procedure.
Pre-driving checks and adjustments3-29

3-30Pre-driving checks and adjustments
Selecting the memorized position
1. Move the shift lever to the P (Park)position.
2. Push the memory switch (1 or 2) fully for at least 1 second.
The driver’s seat, steering column and
outside mirrors will move to the mem-
orized position with the indicator light
flashing, and then the light will stay on
for approximately 5 seconds.
Linking log-in function to a stored
memory position
The log-in function can be linked to a
stored memory position with the following
procedure.
1. Place the ignition switch in the ONposition while carrying an Intelligent
Key that was registered to the vehicle
with the log-in function. For more
details, see “Log-in function” (P.3-14).
2. Adjust the position of the driver’s seat, steering column and outside mirrors
manually. See “Seats”(P.1-2),“Tilt/
telescopic steering” (P.3-24) and“Out-
side mirrors” (P.3-26).
3. Place the ignition switch in the OFF position. The next time you log in (selecting the user
on the display) after placing the ignition
switch in the ON position while carrying
the Intelligent Key, the system will auto-
matically adjust to the memorized driving
position.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.
When the vehicle is moving.
. When the adjusting switch for the
driver’s seat and steering column is
turned on while the automatic drive
positioner is operating.
. When the memory switch 1 or 2 is
pushed for less than 1 second.
. When the seat, steering column and
outside mirrors have already been
moved to the memorized position.
. When no position is stored in the
memory switch.
. When the shift lever is moved from the
P (Park) position to any other position.
(However, it will not be canceled if the
switch is pushed while the seat and
steering column are returning to the
previous positions (entry/exit func- tion).)

M
MaintenanceBattery ......................................................... 8-17
General maintenance ..................................... 8-2
Indicators for maintenance (vehicle
information display) ..................................... 2-29
Inside the vehicle .......................................... 8-3
Maintenance precautions ............................... 8-5
Maintenance requirements ............................. 8-2
Outside the vehicle ........................................ 8-2
Seat belt maintenance ................................. 1-16
Under the hood and vehicle ........................... 8-4
Malfunction Indicator Light (MIL) ....................... 2-19
Map lights ........................................................ 2-58
Master warning light ......................................... 2-17
Mechanical key (Intelligent Key system) .............. 3-3
Memory storage Automatic drive positioner ........................... 3-29
Meter Trip computer .............................................. 2-31
Meters and gauges ............................................. 2-6
Instrument brightness control ...................... 2-46
Mirror
Inside mirror ................................................ 3-25
Outside mirrors ............................................ 3-26
Vanity mirror ................................................ 3-28
Moonroof .......................................................... 2-56
N
NAVI Shift Control ............................................. 5-19
New vehicle break-in ......................................... 5-99
Noise and vibration ...................... Hybrid System-12
O
Odometer............................................................ 2-7
Off-road recovery ................................................ 5-8
Oil Capacities and
recommended fuel/lubricants ........................ 9-2
Changing engine oil and filter ...................... 8-13
Checking engine oil level ............................. 8-12
Engine oil .................................................... 8-12
Engine oil viscosity ........................................ 9-7
One touch unlock sensor (See Intelligent
Key system) ........................................................ 3-9
Operation Indicators for operation ............................... 2-24
Operation of the INFINITI Direct Response
Hybrid
®System .............................. Hybrid System-4
Outside mirrors ................................................. 3-26
Overheat, If your vehicle overheats ..................... 6-7
Owner’s Manual/Service Manual
order information .............................................. 9-23
P
Panic alarm ...................................................... 3-16 Parking
Parking brake operation ............................... 5-20
Parking on hills ......................................... 5-103
Parking brake break-in .................................... 5-106
Personal lights .................................................. 2-59
PERSONAL mode ............................................... 5-23
Phone
Car phone or CB radio ................................... 4-3
Power Power door lock ............................................. 3-4
Power outlet ................................................ 2-48
Power steering system ............................... 5-104
Power windows ............................................ 2-54
Power steering warning light ............................. 2-17
Precautions Braking precautions ................................... 5-106
Child restraints ............................................ 1-19
Cruise control .............................................. 5-56
Maintenance .................................................. 8-5
Seat belt usage ........................................... 1-10Supplemental restraint system ..................... 1-37
When starting and driving .............................. 5-3
Pre-crash seat belts with comfort function ........ 1-12
Predictive forward collision warning system ...... 5-94
Push starting ...................................................... 6-7
Push-button ignition switch ..................... 5-10, 5-11
R
Radio Car phone or CB radio ................................... 4-3
Rain-sensing auto wiper system ........................ 2-40
10-5

10-6
Rapid air pressure loss ....................................... 5-8
Readiness for inspection/maintenance (I/M) test
(US only) .......................................................... 9-22Rear door lock
Child safety rear door lock ............................. 3-6
Rear window and outside mirror
defroster switch ................................................ 2-41
Recorders Event data ................................................... 9-23
Regenerative brake ......................... Hybrid System-8
Registering your vehicle in another country ...... 9-11
Remote keyless entry system ............................ 3-14
Reporting safety defects ................................... 9-21
Request switch (See Intelligent Key system) ........ 3-9
Road accident cautions ................... Hybrid System-3
Roadside assistance program ............................. 6-2
Rollover .............................................................. 5-8
Roof Moonroof ..................................................... 2-57
Run-flat tires ....................................................... 6-4
S
Safety Child seat belts ........................................... 1-17
Reporting safety defects .............................. 9-21
Seat adjustment Front power seat adjustment .......................... 1-3
Front seats ..................................................... 1-3
Seat belt(s) Child safety ................................................. 1-17
Infants ......................................................... 1-18 Injured persons ........................................... 1-12
Larger children ............................................. 1-18
Precautions on seat belt usage .................... 1-10
Pre-crash seat belts with comfort function ... 1-12Pregnant women .......................................... 1-12
Seat belt cleaning .......................................... 7-7
Seat belt extenders ...................................... 1-16
Seat belt maintenance ................................. 1-16
Seat belt warning light and chime ............... 2-17
Seat belts .................................................... 1-10
Seat belts with pretensioners ...................... 1-49
Shoulder belt height adjustment .................. 1-16
Small children ............................................. 1-18
Three-point type .......................................... 1-13
Seat(s) Driver-side memory ...................................... 3-28
Heated seats ................................................. 1-5
Seats ............................................................. 1-2
Security system
Vehicle security system ................................ 2-35
Security system (INFINITI Vehicle Immobilizer
System)
Engine start ................................................. 2-37
Shift lever Shift lock release ......................................... 5-18
Shift lock release, Transmission ........................ 5-18
SHIFT “P”warning ............................................ 2-24
Shifting
Automatic transmission ............................... 5-14
Shoulder belt height adjustment ....................... 1-16
SNOW mode ..................................................... 5-21 Spark plugs ...................................................... 8-19
Speedometer ...................................................... 2-7
SPORT mode ..................................................... 5-21
STANDARD mode ............................................... 5-21
Starting
Before starting the INFINITI Direct Response
Hybrid
®System ........................................... 5-13
Jump starting ............................................... 8-18
Precautions when starting and driving ........... 5-3
Push starting ................................................. 6-7
Starting the INFINITI Direct Response
Hybrid
®System ........................................... 5-14
Status light, Front passenger air bag ................ 1-44
Steering Direct adaptive steering ............................. 5-104
Power steering system ............................... 5-104
Tilt/telescopic steering ................................. 3-24
Storage ............................................................. 2-49
Storage box ...................................................... 2-52
Sun visors ........................................................ 3-25
Sunglasses holder ............................................ 2-51
Supplemental air bag warning labels ................ 1-50
Supplemental air bag warning light ......... 1-50, 2-17
Supplemental restraint system .......................... 1-37 Precautions on supplemental
restraint system ........................................... 1-37
Switch Autolight switch ........................................... 2-41
Fog light switch ........................................... 2-47
Hazard warning flasher switch ....................... 6-2
Headlight switch .......................................... 2-41