center console INFINITI Q60 COUPE 2015 Quick Reference Guide

14
first drive features
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).
The system will automatically maintain the set speed



until you tap the brake pedal, accelerate, cancel or



turn the system off.
To activate the cruise control, push the ON/OFF
switch 1. The CRUISE indicator light in the



instrument panel will illuminate.
To set a cruising speed, accelerate the vehicle to the desired speed, push the
COAST/SET switch
2 and release. The CRUISE SET indicator light in the instrument panel
will illuminate. Take your foot off the accelerator pedal. Your vehicle \
will maintain the
set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 3. When the



vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 2. Release the



switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch 4.
To turn off cruise control, push the ON/OFF switch 1. The CRUISE indicator light
in the



instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
USB (Universal Serial Bus) Connection Port/iPod® Interface
The USB port 1 is located in the center console
under the arm rest.
When a compatible USB memory device or iPod®
is plugged into the USB port, compatible audio
and video files stored on the device can be
played through the vehicle’s audio system and
front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.1
1
2
34
1811810_15b_Q60_G_Coupe_Convert_QRG_091514.indd 149/15/14 1:26 PM

16
Opening/Closing the Hard Top (Convertible models)
Before opening or closing the retractable hard top,
refer to your Owner’s Manual for detailed warnings and
cautions regarding hard top operation.
The trunk area must be absolutely empty or it may result
in damage to the hard top.
Preparing to Lower the Hard Top
1.

The vehicle must be on a level surface when
operating the hard top.
2.


Make sure that the trunk area is absolutely empty.
3.


Pull up on the strap to open the trunk

room partition.
4.


Secure the partition hooks into holders until they
latch. If the trunk room partition hooks
are not latched in the holders, the hard
top cannot be operated and the

CHECK
SEPARATOR indicator will illuminate on the
vehicle information display located between
the tachometer and speedometer.
5.


Securely close the trunk before operating the

hard top.
Hard Top Operation
1.


Move the shift lever to the
P (PARK) position
(automatic transmission) or move the shift lever to
the N (NEUTRAL) position (manual transmission)
and apply the parking brake.
2.


Start the engine.
3.


Press the hard top operating switch, located on the center console, to OPEN

or CLOSE and
hold until the top is fully positioned.
4.

The ROOF OPEN or ROOF CLOSED indicator will display when the hard top is
fully positioned.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

first drive features
1811810_15b_Q60_G_Coupe_Convert_QRG_091514.indd 169/15/14 1:27 PM