brakes INFINITI Q60 COUPE 2015 Towing Guide
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2015, Model line: Q60 COUPE, Model: INFINITI Q60 COUPE 2015Pages: 25, PDF Size: 0.42 MB
Page 19 of 25

 2015 Infiniti Towing Guide  
 
 
18
equipped) carefully. At the first sign of overheating, pull to the side of the road. See IF YOUR ENGINE 
OVERHEATS later in this section for more information. 
 
HILLS – DOWNGRADES 
 WARNING- While going downhill, the weight of the trailer pushing on the tow vehicle may 
decrease overall stability, and may deteriorate overall handling characteristics.  The vehicle may 
handle unpredictably which could cause a loss of vehicle control resulting in an accident, property 
damage, serious injury or death.  Therefore, to maintain adequate control, reduce your speed and 
shift to a lower gear and apply the braking in short bursts. If your vehicle is equipped with Tow 
Mode, see your vehicle owner’s manual for information about the use of this function. 
 
 WARNING- Avoid long or repeated use of the brakes when descending a hill, as this reduces 
their effectiveness and could cause overheating which could result in damage to your brake 
components or unable to slow to a safe speed. Shifting to a lower gear instead provides “engine 
braking” and reduces the need to brake as frequently. 
 
HIGH-ALTITUDE PERFORMANCE 
An engine will lose about 4% of its performance for every 1,000 feet above sea level that you travel. 
If you will be towing in high altitudes, it is a good idea to allow more time than usual due to the 
engine’s reduced performance. 
 
INTELLIGENT CRUISE CONTROL 
 
 WARNING- In order to maintain a safe distance to the vehicle ahead to avoid the possibility of 
accidents, property damage, serious injury or death.  Infiniti recommends not to use the Intelligent 
Cruise control (ICC) system while towing a trailer or other vehicle.   In certain road conditions when 
your vehicle is towing, the ICC sensor may not detect a vehicle ahead.  If the ICC sensor cannot 
detect the reflector on the vehicle ahead, the ICC system may not maintain the selected distance 
which could cause an accident, property damage, or death. 
 
BLIND SPOT INTERVENTION  
 WARNING- Do not use the Blind Spot Intervention system (BSI) when towing a trailer.  The BSI 
system cannot function properly when objects are obstructing the radar sensors which could cause 
an accident, property damage, or death.   
 
TOW MODE (IF SO EQUIPPED) 
Tow Mode is recommended when towing a heavy trailer or hauling a heavy load, in stop-and-go 
traffic, rolling terrain, or a busy parking lot. Driving the vehicle in Tow Mode may affect fuel  
Page 21 of 25

 2015 Infiniti Towing Guide  
 
 
20
 
6.  If no leaks are apparent and all other components appear to be operating properly with the 
engine cooled to its normal operating temperature; check the coolant level in the reservoir 
tank with the engine running. Add coolant to the reservoir tank if needed. At this point, if 
repairs are required, go to the nearest Infiniti retailer. See the IN CASE OF EMERGENCY 
section of your vehicle owner’s manual for additional information on overheating. 
 
NOTE – All Infiniti vehicles have an engine protection mode which helps reduce the chance of 
engine damage if the engine coolant reaches a specified temperature.  
 
 
 
NOTES 
 
 
 
 
 
 
 
 
 
 
 
 
Passenger Vehicles – Infiniti does not recommend trailer towing with Q50, Q60 (Coupe, 
Convertible), Q70, or Q70 (HEV) vehicles. 
 
Cross-Over Vehicles – Infiniti 
does not recommend trailer towing with QX50, or the QX70 2WD vehicles.  
 
Other Recommendations and Information – Towing performance and speed are affected by vehicle 
payload, tow weight, road grades, and weather conditions, including high temperatures. See your 
vehicle owner’s manual for details. 
 
 
 
 
 
1  Maximum Trailer Weight values are calculated assuming a base vehicle with 
driver and any options required, to achieve the rating. Additional 
passengers, cargo and/or optional equipment will add weight to the vehicle 
and reduce your vehicle’s maximum towing capacity and trailer tongue 
load. 
 
2   In general, a weight-distributing hitch system should be used when towing 
over 5,000 lbs. 
 
 3    Most states require a separate braking system on trailers with a loaded  
    weight above a specific amount. Check local ordinances.  7-pin connector  
    trailer wire harnesses are required for use with trailer brakes (available   
        separately).  
Page 22 of 25

 2015 Infiniti Towing Guide  
 
 
21
TOWING GLOSSARY  
   
 
 
  
  BALL MOUNT A bar that holds the hitch ball and is inserted into the hitch receiver. Also 
commonly called a drawbar. 
  BREAKAWAY SWITCH A safety device using a trailer battery that automatically applies the trailer’s 
brakes if it should accidentally become separated from the tow vehicle. A 
breakaway switch may be used with both electric or surge trailer brake systems. 
  BUMPER HITCH A reinforced bumper designed to accommodate a hitch ball. 
  ELECTRIC TRAILER  BRAKES When the brakes on a tow vehicle are applied, an electric current is sent to an 
actuator which applies the trailer’s brakes. 
  ELECTRIC TRAILER  BRAKE CONTROLLER A device that controls the electric trailer brakes. 
  GROSS AXLE  WEIGHT RATING (GAWR) The maximum amount of weight each vehicle axle (front and rear) is designed to 
safely carry.     
   GROSS COMBINED  WEIGHT RATING (GCWR) The maximum allowable combined weight of the vehicle and trailer, including 
passengers and all cargo. 
   GROSS VEHICLE 
WEIGHT RATING (GVWR) The maximum allowable weight of the vehicle, including passengers, cargo, fuel, 
hitch, trailer tongue load, and any optional equipment. 
   HITCH BALL 
 A ball that connects the trailer to the tow vehicle hitch that provides the means 
by which the trailer pivots during cornering.  Available in a number of sizes and 
weight capacities, it must correspond to the trailer coupler size, and have a 
sufficient capacity rating for the trailer being pulled.
    RECEIVER HITCH A frame- or structure-mounted hitch with a receiver that allows removal of the ball 
mount.
    SAFETY CHAINS/CABLES Provides an emergency connection between the tow vehicle and the trailer, 
should the trailer become disengaged for any reason.
    SURGE BRAKES 
 Hydraulic-type braking system activated by inertia. As the tow vehicle begins to 
brake, the trailer pushes against the hitch ball, consequently activating the trailer 
brakes.  
    TRAILER TONGUE/COUPLER The part of the trailer that extends forward to meet the tow vehicle, and carries 
the coupler assembly.
    TRAILER TONGUE 
LOAD The amount of trailer weight pressing down on the hitch. 
   WEIGHT-DISTRIBUTING 
HITCH SYSTEM Type of hitch system that helps shift the trailer tongue weight to all trailer tires 
and the tow vehicle front tires. Strongly recommended when towing trailers with a 
Maximum Trailer Weight greater than 5,000 lbs.   
   WIRING HARNESS 
 Provides an electrical connection linking the tow vehicle’s electrical system to the 
trailer’s system.