sensor INFINITI Q60 COUPE 2019 Quick Reference Guide

8
Wiper and Washer Switch
Move the lever up or down to one of the following
positions to operate the windshield wipers:
MIST
One sw

eep operation
OFF

Wipers ar

e OFF
AUTO

Speed-sensing and r
ain-sensing



(if

so equipped) automatic wipe
LO



C

ontinuous wipe, slow
HI

C

ontinuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist
the control ring
.
Pull the lever
toward you to operate the
windshield washer.
WIPER BLADE REPLACEMENT PROCEDURE
The windshield wipers must be in the service position
in order to replace the wiper blades.
To move the wiper blades to the service position:
•


When the ignition swit
ch is in the ON position or
within 60 seconds of placing the ignition switch
in the OFF position, lift the windshield wiper and
washer lever upwards twice in less than 0.5 seconds.
The windshield wipers will move to the service
position automatically, and the wiper blades can
now be replaced.
To move the wiper blades back to the original position:


•
Plac
e the wiper arm in the down position and lift the wiper and washer lever up for
more than 1 second, or lower the lever down to operate at any wiper speed.
To turn the rain sensor function on and off:
1.


Pr
ess the MENU button below the lower display.
2.


T
ouch the “Settings” key and then the “Vehicle”
key
on the display.
3

.



T

ouch the “Rain Sensor” key
to toggle the
feature ON and OFF.
When the rain-sensing function is disabled, the AUTO
position on the wiper stalk will work in conventional
intermittent mode.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.