INFINITI Q70 2014 Quick Reference Guide

9
Trunk Lid Release
Use one of the following methods to unlatch the trunk lid
then lift the lid to open the trunk:
Push the trunk open request switch
01 under the

trunk handle while carrying the
INFINITI Intelligent
k
ey with you.
Press the hOLD button
02 on the Intelligent ke y for

more than 1 second.

From inside the vehicle, push the trunk lid release

switch
03 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Seat Adjustments
To slide the seat forward or backward, push the switch
01 forward or backward.
To recline the seatback, push the switch
02
forward or backward.
SEAT LIFTER
To adjust the angle of the front seat cushion or height




of the seat, push the front or rear end of the switch
01 up or down.

LUMBAR SUPPORT (if so equipped)

To adjust the seat lumbar support, push the front or back end of the swi\
tch 03 .
For more information, refer to the “Safety ——Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
01
02
03
010203
1276460_14a_Infiniti_Q70_QRG_102813.indd 910/28/13 2:30 PM

10
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory.
Follow this procedure to set the memory positions:

•
Confirm
the shift lever is in the P (PAR k ) position.
•

Push
the ignition switch to the ON position.
•

Adjust the driver’s seat, steering column and outside


mirrors to the desired positions using the adjusting
switches for each feature.
•

Push the

SE t switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
•

The indicator light on the memory switch you select will illuminate for \
approximately

5 seconds.


•

The
driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t k ey. To link a
memorized position to your INFINITI Intelligent k ey, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the

switch
01 right or left.
Adjust each mirror to the desired position using

the switch
02 .
To fold the outside rearview mirrors, push the switch
03 to the
position. To unfold the outside rearview mirrors, push the switch 03
to the position.
RE
v
ERSE TILT-
d O w N FEATURE
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically
turn downward.



1.

Push the ignition switch to the
ON position.



2.

Move the shift lever to the
R (REVERSE) position.



3.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01 .



4.


The outside mirror surface moves downward.
w hen one of the following conditions has occurred, the outside mirror sur\
faces will return to
their original positions.
•

The shift lever is moved to any position other than
R (REVERSE).
•

The outside mirror control switch is set to the center or (neutral) po\
sition.


• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
01
0203
1276460_14a_Infiniti_Q70_QRG_102813.indd 1010/28/13 2:30 PM

11
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
k

ey is with you (that is, in your pocket or purse).
d epress the brake pedal.
Press the ignition switch S t AR t /S t OP button to start
the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PAR k ) position and
apply the parking brake.
Press the ignition switch S t AR t /S t OP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
hEAdLIGhT CONTROL
Turn the headlight control switch to the position
01 to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to
the
position
02 to turn on the headlights.
AUTOLIG
h
T SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it is
light. The system will keep the headlights on for a period of time after\
you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AU t O position
03
then push the ignition switch to ON position. To deactivate the autolight system, turn the
headlight control switch to the OFF,
position
01 or
position
02 .
h

IG
h
BEAM SELECT
Push the headlight control switch forward 04 to

select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to
select the low beam. The blue indicator light
will extinguish.
Pull and release the headlight control switch 05 to

flash the headlight high beams on and off.
FOG LIG
h
T S
w
ITC
h
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
03
01
02
04
05
06
1276460_14a_Infiniti_Q70_QRG_102813.indd 1110/28/13 2:31 PM

12
first drive features
Automatic Climate Controls (if so equipped)
01 AUt O BU tt ON

The automatic mode may be used year-round. Press the AU t O button to turn the system
on, and the system will automatically control the inside temperature (a\
utomatic cooling
and/or dehumidified heating), air flow distribution and fan speed.
02 CLIMA t E BU tt ON

Press the CLIMA
t E button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
03 DRIVER’S SIDE t EMPERA t URE CON t ROL BU tt ONS
Press the driver’s side temperature control buttons up for warmer air or down for
cooler air.
0406
0809120701101102
0305
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIS t ) - One sweep operation of the wipers.
02 Auto
(A U t O ) - Operates the rain-sensing wipers
intermittently. The intermittent speed can be
adjusted by twisting the time control ring
03 to

increase or decrease the wiper sensitivity.
04 Low
(LO) - w ipers operate at a continuous
low-speed.
05
h
igh ( h I) - w ipers operate at a continuous
high-speed.
06 Pull the lever toward you to activate the washer. T
he wipers will operate several times.
RAIN-SENSING AUTO w IPER SYSTEM
The rain-sensing auto wiper system can automatically turn on the wipers \
and adjust the wiper
speed, depending on the rainfall and the vehicle speed.
To turn on the rain-sensing auto wiper system, push the lever down to th\
e AU t O position
02 .
The wiper will sweep once while the ignition switch is in the ON position.
The rain sensor sensitivity level can be adjusted by turning the time co\
ntrol ring 03 to
increase or decrease sensitivity.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
MISt
OFF
AU

t O
LO
h

I
02
04
05
0103
06
1276460_14a_Infiniti_Q70_QRG_102813.indd 1210/28/13 2:31 PM

13
04 DRIVER’S SIDE MANUAL AIR FLOW CONt ROL BU tt ON

Press the driver’s side manual air flow buttons to manually control t\
he driver’s side air
flow modes.
The following air flow indicator modes will display on the control panel\
display screen:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
05 PASSENGER’S SIDE t EMPERA t URE CON t ROL BU tt ONS

To manually adjust the passenger’s side temperature, press the passen\
ger’s side
temperature control buttons up
for warmer air or down for cooler air.
06 PASSENGER’S SIDE MANUAL AIR FLOW CON t ROL BU tt ON

Press the passenger’s side manual air flow buttons to manually contro\
l the passenger’s
side air flow modes.
The following air flow indicator modes will display on the control panel\
display screen:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
07 FAN SPEED CON t ROL BU tt ONS

Press the left button to decrease the fan speed or press the right
button to

increase the fan speed.
08 DEFROS t ING/DEFOGGING FRON t AND SIDE WINDOWS

Press the defroster control button
to turn the system on. The A/C automatically turns

on when the defroster mode is selected. This feature removes humidity fr\
om the air.
To defrost the front and side windows, set the temperature controls
03 and fan speed

controls 07 to their maximum settings. 09 DEFROS t ING REAR WINDOW AND OU t SIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off. This function automatically turns off after approximately 15 minutes.
10 FORESt BU tt ON
Press the forest button
to activate the Forest Air® system.

This system’s settings will activate the breeze mode, the outside odo\
r and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity co\
ntrol. The fan
speed and air flow is automatically set to the auto position.
11 IN t A k E AIR CON t ROL BU tt ON

Press the intake air control button to recirculate interior air inside the vehicle.
The indicator light on the button will illuminate. This system is used to a\
void certain
outside odors and helps to adjust the inside vehicle temperature more ef\
fectively.
The air recirculation mode cannot be activated when the climate control \
system is in the
front defroster mode
or front defroster and foot vent mode
.
Press the intake air control button again to change the air circulation from the
intake air to the outside air. The indicator light on the button will turn off.
12 OFF BU tt ON
Press the
OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1276460_14a_Infiniti_Q70_QRG_102813.indd 1310/28/13 2:31 PM

14
first drive features
FM/AM/SiriusXM®* Satellite Radio With CD/DVD Player (if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB

Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 t UNE/FOLDER/AUDIO CON t ROL k NOB
To manually tune the radio, turn the
t UNE/FOLDER/AUDIO knob left or right.
03 SEEK•CAT/TRACK BUTTON
To scan quickly and stop at the previous or next broadcast station, pres\
s the or end
of the SEEK•CAT/TRACK button.
For satellite radio, press the or end of the SEEK•CAT/TRACK button to switch to the
first channel of the previous or next category.
To change tracks on a C d , press the or end of the SEEK•CAT/TRACK button.
To fast forward or rewind a track on a C d , press and hold the or end of the
SEEK•CAT/TRACK button.
04 S t A t ION PRESE t BU tt ONS

Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for
satellite radio.
To store a station in a preset, you must first select a radio band by pr\
essing the FM•AM
button
05 or
XM button
06 , then tune to the desired FM, AM or XM satellite radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indic\
ator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored
then press the corresponding station select button (1-6).
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional\
satellite radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
01
030506
02
04
1276460_14a_Infiniti_Q70_QRG_102813.indd 1410/28/13 2:31 PM

15
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 MP
h (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch
01 . The
CRUISE
indicator light in the

instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAS t /SE t
switch
02 and release. The
CRUISE SE
t indicator light
in the instrument panel will

illuminate. Take your foot off the accelerator pedal. Your vehicle will \
maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . when the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAS t /SE t switch
02. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
04 .
To turn off cruise control, push the ON/OFF switch
01 . Both the CRUISE indicator light and
the SE
t
indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
03
02
04
USB/iPod® Interface
The USB jack 01 is located in the center console under

the arm rest.
w hen a compatible USB memory device or iPod® is

plugged into the USB jack, compatible audio and
video files stored on the device can be played
through the vehicle’s audio system and
front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.
01
1276460_14a_Infiniti_Q70_QRG_102813.indd 1510/28/13 2:31 PM

16
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
vEhICLE-TO-vEhICLE dISTANCE CONTROL MOdE
To set v ehicle-To- v ehicle d istance Control mode,



press the
CRUISE ON/OFF button
01 for less than
1.5 seconds. The
CRUISE indicator light
02
will illuminate.
Accelerate to the desired speed.
Push down on the COAS t /SE t switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change

the set distance between long, middle and short.
w hen a vehicle is not detected ahead of you in the



lane, the set distance, and set vehicle speed indicator




lights will illuminate 05 in set mode.

w hen a vehicle is detected ahead of you in the lane, the vehicle ahead
detection, set distance and set vehicle speed indicator lights will
illuminate
06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES switch
07 . when the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the
COAS t /SE t switch
03 . Release



the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will extinguish.
To turn off cruise control, press the
CRUISE ON/OFF button
01 . The CRUISE indicator light

02 in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
w hile cruise control is off, press the CRUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The CRUISE
indicator light will illuminate.
Accelerate to the desired speed.
Push down on the
COAS t /SE t switch and release it. The SE t indicator light will illuminate.



Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
w hen one of the two cruise modes is in use, you must turn the system off \
and then turn it on



again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
0205
06
0807
03
01
04
1276460_14a_Infiniti_Q70_QRG_102813.indd 1610/28/13 2:31 PM

17
Trip Computer

whe n the
button
01 is pressed, the following

modes will appear on the vehicle information
display
02 :
•

MPG

–
d
isplays the current fuel consumption.
•

MPG/MP

h – d isplays the average fuel
consumption and speed since the last reset.



·


To reset, press and hold the button 03 for
more than one second. Both the fuel consumption
and average speed will reset at the same time.
•
t
IME/MILES –
d
isplays the elapsed time and total
distance the vehicle has been driven since the last reset.



·


w
hen the elapsed time and trip odometer are displayed, To reset, press an\
d hold the

button 03 for more than one second. Both the elapsed time and trip odometer will \
reset at
the same time.
•

RANGE

–
d
isplays the estimated distance to empty (dte) the vehicle can be drive\
n
before refueling.
•

OU

t
SIDE
t
EMP – d isplays the exterior air temperature including a low temperature
warning feature.
•

SE

tt
ING – Allows you to set reminders for alerts and maintenance intervals o\
r change the
language and units used in the system.



· Press the
button
03 to cycle through the various setting modes.

· Press the
button
01 to choose the selected menu.
•

WARNING

–
d
isplays when a warning is present.
To reset t RIP A and t RIP B, press and hold the t RIP RESE t button 04 for more than
one second.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the or button to interrupt the voice

prompts at any time and speak a command after
the tone.
To use the system faster, you may speak the second
level commands with the main menu command on
the main menu. For example, Press the
or
button and after the tone say, “Call Redial”.
The “ h elp” command can be used to hear a list of
available commands at any time.
03
01
02
Bluetooth®
Controls
Microphone
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
system guide
04
1276460_14a_Infiniti_Q70_QRG_102813.indd 1710/28/13 2:31 PM

18
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Reduce background noise as much as possible by closing windows and pointing hv AC vents
away from the ceiling.
Speak naturally without long pauses and without raising your voice.


w hen speaking phonebook names, please be aware some phones require the la\
st name to be
spoken before the first name. For example, “Michael Smith” may be \
spoken as “Smith Michael”.
To cancel a v oice Recognition session, say “Cancel” or “Quit” or press an\
d hold the
or

button for 5 seconds.
To go back to the previous command, say “Go back” or “Correctio\
n”.
If the v oice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation*
(if so equipped)
CONNECTING PROCEdURE
The vehicle must be stationary when connecting
the phone.


1.
Press the PhONE button on the instrument panel or
the
button on the steering wheel and select the

“Connect Phone” key.
2.


Initiate connecting from the phone.
•
The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
•

when prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)


3.

when connecting is complete, the screen will
return to the Phone menu display.
system guide
1276460_14a_Infiniti_Q70_QRG_102813.indd 1810/28/13 2:31 PM