key fob INFINITI Q70 HYBRID 2014 Quick Reference Guide

10
first drive features
INFINITI Intelligent Key System
It is important to make sure the Intelligent k ey is
withyou (that is, in your pocket or purse).
The INFINITI Intelligent k ey system allows you to
lock or unlock your vehicle, open your trunk and
start the engine.
The operating range of the Intelligent ke y is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
01 once or press the
button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:

•
Push
either door handle request switch
01 once;
the corresponding
door will unlock. Push the door handle request switch 01 again

within 1 minute; all other doors will unlock, or
•

Press


the
button
03 on the key fob to unlock the driver’s side

door. Press the
button again; all other doors will unlock.
To open the trunk, press the
button
04 for more than 1 second.

The Intelligent k ey can also be used to activate the panic alarm by pressing and holding
the
button
05 for more than 1 second. Once activated, the panic alarm and headlights

will stay on for a period of time.
INTELLIGENT
k
EY BATTERY DISCHARGE

If the battery of the Intelligent k ey is discharged or
environmental conditions interfere with the Intelligent
k

ey operation, start the engine according to the
following procedure:
1.


Move the shift lever to the
P (P AR k) position.



2.

Firmly apply the foot brake.



3.

Touch the ignition switch with the Intelligent
k ey and a chime will sound.



4.
w ithin 10 seconds after the chime sounds, push the ignition switch while \
depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting a\
nd driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
01
02
03
04
05
1276459_14_M_Hybrid_QRG_112213.indd 1011/22/13 9:39 AM

11
Trunk Lid Release
Use one of the following methods to unlatch the trunk lid
then lift the lid to open the trunk:
Push the trunk open request switch 01 under the
trunk handle while carrying the INFINITI Intelligent


k
ey with you.
Press the HOLD button
02 on the key fob for
more than one second.
From inside the vehicle, push the trunk lid release
switch
03 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
02
03
010203
Seat Adjustments
To slide the seat forward or backward, push the
switch
01 forward or backward.
To recline the seatback, push the switch
02
forward or backward.
SEAT LIFTER
To adjust the angle of the front seat cushion or height




of the seat, push the front or rear end of the switch
01 up or down.

LUMBAR SUPPORT (if so equipped)

To adjust the seat lumbar support, push the front or back end of the swi\
tch 03 .
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 1111/22/13 9:39 AM

12
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory. Follow these steps to set the memory positions:

• Confirm the shift lever is in the P (PAR k ) position.
•
Push the ignition switch to the ON position.
•

Adjust
the driver’s seat, steering column and

outside mirrors to the desired positions, using the adjusting switches f\
or each feature.


•
Push
the SE t switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
•


The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
•
The

driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t k ey. To link a
memorized position to your INFINITI Intelligent k ey, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
01 right or left.

Adjust each mirror to the desired position using the
switch
02 .
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the outside
rearviewmirrors, push the switch
03 to the
position.
RE
v
ERSE TILT-DO
w
N FEATURE
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically



t
urn downward.



1.

Push the ignition switch to the
ON position.



2.

Move the shift lever to the
R (REVERSE) position.



3.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01 .



4.


The outside mirror surface moves downward.
01
0203
1276459_14_M_Hybrid_QRG_112213.indd 1211/22/13 9:39 AM