lights INFINITI Q70 HYBRID 2014 Quick Reference Guide

3**Laws in some jurisdictions may restrict the use of “Text-to-Speech.\
” Some applications and features, such as social
networking and texting, may also be restricted. Check local regulations \
for any requirements before using these features.
• In case of an emergency, press the in-vehicle
telematics SOS button
01.
•

A Response Specialist will provide assistance based

on the situation described by the vehicle’s occupant.
Enhanced Roadside Assistance – Roadside Assistance
can be accessed by touching the Infiniti Connection
key on the Info menu, the
key on the map screen

or by pressing the SOS button.
•



This service allows subscribers to receive assistance for a non-emergenc\
y incident, such as
towing or a third party response.
•

If warranted, Roadside Assistance may also be used in conjunction with t\
he Emergency

Assistance service by pressing the SOS button.
My Schedule – Access your personal online Google Calendar™, hear details read via text-to-
speech** and select location as a destination via the Navigation System.\
Report Stolen v ehicle – A Response Specialist will attempt to obtain location inform\
ation
from a reported stolen vehicle and provide that information to the local\
law
enforcement agency.
Remote Door Lock/Unlock – Remotely access your vehicle via an Infinit\
i Connection
Response Specialist or designated website to remotely lock or unlock you\
r vehicle.
Alarm Notification – This system will notify you when the factory-ins\
talled vehicle alarm
system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance no\
tifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunct\
ion that triggers
instrument panel warning lights.

Destination Assistance – Receive point-of-interest assistance via gui\
ded I v R (Interactive
v

oice Response) or a Response Specialist by pressing the
on the map screen or the
Infiniti Connection web portal.
Destination Send-to v ehicle – Find and download point-of interest information from
Google Maps™.
•

To access, go to Infiniti Connection menu and select “Sync All Inform\
ation Feeds”. Then go

to the feeds menu page and download the desired destination information.\

Connected Search – Select “Connected Search” from the Destinati\
on menu on the vehicle’s
Navigation System to conduct a point-of-interest search within a certain\
distance of the
vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified \
region. Set up
boundaries in the Monitoring section of the Infiniti Connection web portal.
Max Speed Alert – Set a maximum speed on the Infiniti Connection web \
portal. You will
receive notifications if your vehicle exceeds the maximum speed setting.\
Mobile Information Service – Receive the latest news headlines, stock\
quotes and sports
scores by setting up preferences on the Mobile Information Service page \
in the Infiniti
Connection web portal.
01
1276459_14_M_Hybrid_QRG_112213.indd 311/22/13 9:38 AM

4
new system features
v alet Alert – Use to set up a 0.2 mi radius around your vehicle.
•

A
ctivate alerts by pressing the “Connect to v oice Menu” button on the Infiniti Connection
™
screen or by pressing the
key on the map screen.
•

At the prompt, say “

v
alet Alert” and then “Activate” or “Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
Forest Air® System (if so equipped)
This system helps keep the air inside your vehicle



clean using an automatic air intake and ventilation




system that monitors air quality with outside and




inside sensors.
Automatic humidity control prevents over-drying of



the passenger compartment and fogging of the




windshield.
w hen the system is ON, the defroster



may automatically turn on.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (sect\
ion 4)” of your
Owner’s Manual.
Blind Spot Warning (BSW) and Blind Spot Intervention® (BSI) (if so equipped)
The Blind Spot w arning (BS w ) system alerts the driver
when another vehicle moves into the vehicle’s blind
spot area.
An indicator light
01 near the outside mirror will

illuminate if the radar sensors detect a vehicle in
the detection zone.
The Blind Spot Intervention™ (BSI) system can assist
the driver in returning the vehicle to the center of the
traveling lane by applying individual brake pressure
to the left or right wheels for a short period of time.
The indicator light
02 will first illuminate in orange and

then turn green before turning off. This indicates that
the Blind Spot
w
arning (BS w ) and Blind Spot Intervention (BSI) systems are operational.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
Automatic Anti-glare Mirrors
The inside rearview mirror and both outside mirrors are designed to auto\
matically change



reflection according to the intensity of the headlights of the vehicle f\
ollowing you.
The anti-glare system will be automatically turned on when the ignition \
switch is in the ON position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 411/22/13 9:38 AM

5
essential information
Hybrid System Warning Light
This light will illuminate when the ignition switch is
in the ON position and will turn off when the hybrid
system is started.
The light will also illuminate when a malfunction



occurs in the electric motor or hybrid system.
w hen this light illuminates while driving, immediately



stop the vehicle in a safe location and c
ontact an INFINITI retailer.
If the hybrid system warning light blinks while driving, it may indicate\
that the Li-ion battery



charge is low and you cannot continue to drive.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Hybrid Awareness
Your vehicle is virtually silent in the electric mode. If you exit your \
vehicle while it is ON, but the
engine is not running, the engine will automatically start, informing yo\
u that the car
is still ON.
Do not store your INFINITI Intelligent k ey within detection range of the vehicle. This may
cause welcome lights and other functions to activate, creating unwanted \
battery drain.
The hybrid system is designed for optimum efficiency and performance. Ac\
tivation of the
electric mode may vary with driving conditions and driver input. A full \
battery display does

not indicate the vehicle should be in the electric mode.
For more information, refer to the “Hybrid System Overview” section of your Owner’s Manual.
1276459_14_M_Hybrid_QRG_112213.indd 511/22/13 9:38 AM

10
first drive features
INFINITI Intelligent Key System
It is important to make sure the Intelligent k ey is
withyou (that is, in your pocket or purse).
The INFINITI Intelligent k ey system allows you to
lock or unlock your vehicle, open your trunk and
start the engine.
The operating range of the Intelligent ke y is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
01 once or press the
button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:

•
Push
either door handle request switch
01 once;
the corresponding
door will unlock. Push the door handle request switch 01 again

within 1 minute; all other doors will unlock, or
•

Press


the
button
03 on the key fob to unlock the driver’s side

door. Press the
button again; all other doors will unlock.
To open the trunk, press the
button
04 for more than 1 second.

The Intelligent k ey can also be used to activate the panic alarm by pressing and holding
the
button
05 for more than 1 second. Once activated, the panic alarm and headlights

will stay on for a period of time.
INTELLIGENT
k
EY BATTERY DISCHARGE

If the battery of the Intelligent k ey is discharged or
environmental conditions interfere with the Intelligent
k

ey operation, start the engine according to the
following procedure:
1.


Move the shift lever to the
P (P AR k) position.



2.

Firmly apply the foot brake.



3.

Touch the ignition switch with the Intelligent
k ey and a chime will sound.



4.
w ithin 10 seconds after the chime sounds, push the ignition switch while \
depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting a\
nd driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
01
02
03
04
05
1276459_14_M_Hybrid_QRG_112213.indd 1011/22/13 9:39 AM

14
first drive features
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the position
01 to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to
the
position
02 to turn on the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it is
light. The system will keep the headlights on for a period of time after\
you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AU t O position
03
then push the ignition switch to the ON position. To deactivate the autolight system, turn the
headlight control switch to the OFF,
position
01 or
position
02 .
HIGH BEAM SELECT
Push the headlight control switch forward
04 to

select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light will extinguish.
Pull and release the headlight control switch
05 to

flash the headlight high beams on and off.
FOG LIGHT S
w
ITCH
The headlights must be on and the low beams

selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar)
to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
03
01
02
04
05
06
1276459_14_M_Hybrid_QRG_112213.indd 1411/22/13 9:39 AM

20
0205
06
Intelligent Cruise Control (ICC) System (if so equipped)
vEHICLE-TO-vEHICLE DISTANCE CONTROL MODE
To set v ehicle-To- v ehicle Distance Control mode,
press the CRUISE ON/OFF button
01 for less than

1.5 seconds. The CRUISE indicator light
02
will illuminate.
Accelerate to the desired speed.
Push down on the COAS t /SE t switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle and short.
w hen a vehicle is not detected ahead of you in the



lane, the set distance and set vehicle speed indicator




lights will illuminate 05 in set mode.

w hen a vehicle is detected ahead of you in the lane, the vehicle ahead
detection set distance and set vehicle speed indicator lights will
illuminate
06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES switch 07 . when the



v

ehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAS t /SE t switch
03 . Release the



switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will extinguish.
To turn off cruise control, press the
CRUISE ON/OFF button
01 . The CRUISE indicator light

02 in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
w hile cruise control is off, press the CRUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The CRUISE
indicator light will illuminate.
Accelerate to the desired speed.
Push down on the
COAS t /SE t switch 03 and release it. The SEt indicator light will
illuminate. Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
w hen one of the two cruise modes is in use, you must turn the system off \
and then turn it on



again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
0807
03
01
04
1276459_14_M_Hybrid_QRG_112213.indd 2011/22/13 9:39 AM

27
HomeLink® Universal Transceiver
The HomeLink system can learn

and consolidate the functions of
up to 3 different hand-held
transmitters, operating items
such as garage doors, property
gates, outdoor and indoor lights
or alarm systems.
To program the HomeLink® Universal Transceiver:
•

Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.


•

Press


and

hold

the

desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.
•

Both


buttons

may

be

released when the indicator light flashes rapidly.
To verify the programming is complete, press and hold the HomeLink button and observe
the indicator light:
•

A
solid, continuous light indicates the programming is complete, and the HomeLink

button will activate your device.


•
A
blinking light that turns to a solid continuous light after 2 seconds indicates

additional steps are required to complete the programming.
An additional person may make the remaining steps easier. To complete the programming process:
•

At
the receiver of the device that you are programming to the HomeLink button, press
and release the learn or smart button (the name may vary by manufacture\
r but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.


•
Press
and hold the programmed HomeLink button for 2 seconds and release.
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programming
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMeLINk
system guide
1276459_14_M_Hybrid_QRG_112213.indd 2711/22/13 9:40 AM