12
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory. Follow these steps to set the memory positions:
• Confirm the shift lever is in the P (PAR k ) position.
•
Push the ignition switch to the ON position.
•
Adjust
the driver’s seat, steering column and
outside mirrors to the desired positions, using the adjusting switches f\
or each feature.
•
Push
the SE t switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
•
The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
•
The
driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t k ey. To link a
memorized position to your INFINITI Intelligent k ey, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
01 right or left.
Adjust each mirror to the desired position using the
switch
02 .
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the outside
rearviewmirrors, push the switch
03 to the
position.
RE
v
ERSE TILT-DO
w
N FEATURE
w hen backing up the vehicle, the right or left outside mirror can be sele\
cted to automatically
t
urn downward.
1.
Push the ignition switch to the
ON position.
2.
Move the shift lever to the
R (REVERSE) position.
3.
Choose the right or left outside mirror by operating the outside mirror \
control switch 01 .
4.
The outside mirror surface moves downward.
01
0203
1276459_14_M_Hybrid_QRG_112213.indd 1211/22/13 9:39 AM
