headrest INFINITI Q70-HYBRID 2018 User Guide

passenger seat:
1.If you must install a child restraint in the
front seat, it should be placed in a
forward-facing direction only. Move
the seat to the rearmost position. Child
restraints for infants must be used in the
rear-facing direction and, therefore,
must not be used in the front seat.
2. Position the child restraint on the seat. Always follow the child restraint manu-
facturer’s instructions.
The back of the child restraint should be
secured against the vehicle seatback.
If necessary, adjust or remove the head
restraint or headrest to obtain the
correct child restraint fit. If the head
restraint or headrest is removed, store it
in a secure place. Be sure to reinstall the
head restraint or headrest when the
child restraint is removed. See “Head
restraints/headrests” (P.1-5) for head
restraint or headrest adjustment, re-
moval and installation information.
If the seating position does not have an
adjustable head restraint or headrest
and it is interfering with the proper child
restraint fit, try another seating position
or a different child restraint.
SSS0360B
Forward-facing — step 3
3. Route the seat belt tongue through the child restraint and insert it into the buckle
until you hear and feel the latch engage.
Be sure to follow the child restraint
manufacturer’s instructions for belt
routing.
If the child restraint is equipped with a
top tether strap, route the top tether
strap and secure the tether strap to the
tether anchor point (rear seat installation
only). See “Installing top tether strap”
(P.1-33). Do not install child restraints
that require the use of a top tether strap
in seating positions that do not have a
top tether anchor.
SSS0651
Forward-facing — step 4
4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt
retractor is in the Automatic Locking
Retractor (ALR) mode (child restraint
mode). It reverts to Emergency Locking
Retractor (ELR) mode when the seat belt
is fully retracted.
Safety — Seats, seat belts and supplemental restraint system1-31

seat belt is not locked, repeat steps 2
through 8.
SSS1085
Forward-facing — step 10
10. If the child restraint is installed in the front passenger seat, place the ignition
switch in the ON position. The front
passenger air bag status light
should
illuminate. If this light is not illuminated,
see “Front passenger air bag and status
light” (P.1-45). Move the child restraint
to another seating position. Have the
system checked. It is recommended you
visit an INFINITI retailer for this service.
After the child restraint is removed and the
seat belt is fully retracted, the ALR mode
(child restraint mode) is canceled.
SSS0791
Installing top tether strap
The child restraint top tether strap must be
used when installing the child restraints with
the seat belts.
First, secure the child restraint with the seat
belt.
1. Flip up the anchor cover from the anchor point which is located directly behind the
child restraint.
2. If necessary, raise or remove the head restraint or headrest to position the top
tether strap over the top of the seatback.
If the head restraint or headrest is
removed, store it in a secure place. Be
sure to reinstall the head restraint or
Safety — Seats, seat belts and supplemental restraint system1-33

1-34Safety — Seats, seat belts and supplemental restraint system
headrest when the child restraint is
removed.
See “Head restraints/headrests” (P.1-
5) for head restraint or headrest adjust-
ment, removal and installation informa-
tion.
Position the top tether strap over the top
of the seatback.
3. Secure the tether strap to the tether anchor point on the rear parcel shelf.
4. Refer to the appropriate child restraint installation procedure steps in this sec-
tion before tightening the tether strap.
If you have any questions when installing a
top tether strap, it is recommended you
visit an INFINITI retailer for this service.BOOSTER SEATS
Precautions on booster seats
WARNING
If a booster seat and seat belt are not
used properly, the risk of a child being
injured in a sudden stop or collision
greatly increases:
. Make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.
. Make sure the shoulder belt is not
behind the child or under the child’s
arm.
. A booster seat must only be installed
in a seating position that has a lap/
shoulder belt.
LRS0455
Booster seats of various sizes are offered by
several manufacturers. When selecting any
booster seat, keep the following points in
mind:
.Choose only a booster seat with a label
certifying that it complies with Federal
Motor Vehicle Safety Standard 213 or
Canadian Motor Vehicle Safety Stan-
dard 213.
. Check the booster seat in your vehicle to
be sure it is compatible with the vehicle’s
seat and seat belt system.

1-36Safety — Seats, seat belts and supplemental restraint system
SSS0640
1.If you must install a booster seat in the
front seat, move the seat to the rear-
most position.
2. Position the booster seat on the seat. Only place it in a forward-facing direc-
tion. Always follow the booster seat
manufacturer’s instructions.
LRS0454
Front passenger position
3. The booster seat should be positioned on the vehicle seat so that it is stable.
If necessary, adjust or remove the head
restraint or headrest to obtain the
correct booster seat fit. If the head
restraint or headrest is removed, store
it in a secure place. Be sure to reinstall
the head restraint or headrest when the
booster seat is removed. See “Head
restraints/headrests” (P.1-5) for head
restraint or headrest adjustment, re-
moval and installation information.
If the seating position does not have an
adjustable head restraint or headrest
and it is interfering with the proper booster seat fit, try another seating
position or a different booster seat.
4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure
to follow the booster seat manufac-
turer’s instructions for adjusting the seat
belt routing.
5. Pull the shoulder belt portion of the seat belt toward the retractor to take up
extra slack. Be sure the shoulder belt is
positioned across the top, middle portion
of the child’s shoulder. Be sure to follow
the booster seat manufacturer’s instruc-
tions for adjusting the seat belt routing.
6. Follow the warnings, cautions and in- structions for properly fastening a seat
belt shown in “Seat belts” (P.1-9).

11-4
H
Hazard warning flasher switch ........................... 6-2
Head restraints/headrests .................................. 1-5
HeadlightsAiming control (See Adaptive Front
lighting System (AFS)) ................................ 2-40
Bulb replacement .......................................... 8-24
Headlight switch ............................................ 2-38
Heated seats ......................................................... 2-44
Heated steering wheel ....................................... 2-43
Heater Engine block heater .................................... 5-126
Heater and air conditioner .......................... 4-32
High temperature warning light ...................... 2-14
High voltage cautions ................. Hybrid System-2
High voltage components .......... Hybrid System-9
Hill start assist system ..................................... 5-124
HomeLink
®Universal Transceiver .................. 2-62
Hood release ......................................................... 3-17
Hook Coat hooks ...................................................... 2-53
Horn ........................................................................\
. 2-44
Hybrid EPS (Electrical Power Steering)
warning light ......................................................... 2-14
Hybrid system over heat warning .................. 2-24
Hybrid system start operation indicator ....... 2-23
Hybrid
vehicle characteristics .............. Hybrid System-10
Hybrid vehicle precautions ......... Hybrid System-9
I
If the vehicle does not start ................................ 6-9
Ignition switch (Push-button) ................................................... 5-9
Automatic transmission models ................ 5-14
Immobilizer system .............................................. 2-34
In-cabin microfilter .............................................. 4-37
Indicator Lights ................................................................ 2-18
Vehicle information display ........................ 2-21
Indicator lights ...................................................... 2-18
INFINITI Direct Response
Hybrid
®System ............................. Hybrid System-2
INFINITI Drive Mode Selector ......................... 5-19
Infiniti InTouch Owner’s Manual ...................... 4-2
INFINITI Vehicle Immobilizer System ............ 2-34
Engine start ..................................................... 2-34
Inside mirror .......................................................... 3-25
Inspection/maintenance (I/M) test .............. 10-19
Instrument brightness control ......................... 2-42
Instrument panel ..................................................... 2-5
Intelligent Cruise Control (ICC) ....................... 5-66
Intelligent Cruise Control (ICC) system MAIN
switch indicator .................................................... 2-26
Intelligent Cruise Control (ICC) system
warning light ......................................................... 2-15
Intelligent Key .......................................................... 3-2
Intelligent Key battery discharge .................... 5-12
Intelligent Key ignition indicator ..................... 2-24 Intelligent Key system ........................................... 3-7
Battery replacement ..................................... 8-21
Key operating range ....................................... 3-8
Key operation ................................................. 3-10
Warning signals .............................................. 3-12
Interior light control switch .............................. 2-61
Interior light replacement .................................. 8-24
Interior lights ......................................................... 2-60
Interior trunk lid release .................................... 3-21
Inverter cooling system ......................................... 8-7
ISOFIX child restraint .......................................... 1-21J
Jump starting ........................................................ 6-10
K
Keyless entry (See remote keyless
entry system) ........................................................ 3-14
Keys ........................................................................\
.... 3-2 For Intelligent Key system ............................. 3-7
L
LabelsAir bag warning labels ................................. 1-50
Air conditioner specification label ......... 10-10
Emission control information label ........ 10-10
Engine serial number .................................... 10-9
F.M.V.S.S./C.M.V.S.S.
certification label ........................................... 10-9