steering INFINITI Q70 HYBRID 2018 Quick Reference Guide

2
Cockpit Overview
1 Dynamic Driver Assistance (DDA) switch (if so equipped)
2 Intelligent Cruise Control (ICC) switches (if so equipped)
3 Wiper and washer switch
4 Trip computer controls and reset button (behind the steering wheel)
5 Vehicle information display
6 Vehicle information display brightness controls (behind the steering wheel)
7 Combined turn signal/headlight control switch
8 Vehicle information display controls
9 Bluetooth® control switches and audio control switches

4
Instrument Panel
1 Adaptive Front Lighting system switch (behind the steering wheel)
2 Tilt/Telescopic steering wheel switch (behind the steering wheel)
3 Push-button hybrid system start (behind the steering wheel)
4 Multi-function control touch-screen/RearView Monitor display/Around View® Monitor
(AVM) display (if so equipped)
5 Climate control panel •
H eater and air conditioning (automatic)
•


F
ront/Rear window defroster
6 Navigation control panel
7 Audio control panel
8 Shift lever
9 Parking brake
10 Hood latch release
11 Lower switch bank
• Warning Systems switch (if so equipped)
•
Saf ety Shield OFF switch
•

H
eated steering wheel switch (if so equipped) •
V
ehicle Dynamic Control (VDC) OFF switch •
T
runk release
•


R

ear sunshade switch (if so equipped)

14
Wiper and Washer Switch
Move the lever 1 up or down to one
of the following positions to operate the
windshield wipers:
MIST One sweep operation
OFF Wipers are OFF
AUTO Rain-sensing automatic wipe
LO Continuous wipe, slow
HI Continuous wipe, fast
To adjust the wiper sensitivity for the AUTO
setting, twist the control ring
2.
Pull the lever
1 toward you operate the
windshield washer.
To turn the rain-sensing automatic wiper
system off, push up the lever to the OFF
position, or pull down the lever to the LO or
HI position.
1
2
PULLING UP THE WIPER ARM
The wiper arm should be in the UP
position when replacing the wiper.
• With the shift lever in the
P (PARK) position, place
the ignition switch in the
OFF position.
• Within 1 minute, push the wiper switch to the MIST position
twice. The wiper operation
stops in mid-operation and the
wiper arm can be pulled up.
• To return the wiper arm, place the wiper arm in the DOWN
position and operate the wiper
switch once.
Voice Recognition
SYSTEM OPERATING TIPS
• The interior of the vehicle should be as quiet as possible.
• Speak naturally. Speaking too fast, too slow, too soft, or too loud makes voice recognition
more difficult.
• Confirm that the correct voice commands are being used. Glance at the screen to see the currently
available commands.
USING THE VOICE RECOGNITION SYSTEM
• Press the
button 1 on the steering wheel, and a
list of commands will appear on the screen.
• After the tone sounds, speak the command.
• To skip the voice prompt and give the command immediately, press the
button 1 on the steering
wheel to interrupt the system. Speak the next
command after the tone sounds.
• To cancel the command, press and hold the
button 1 on the steering wheel.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
1
Please see your Owner’s Manual for important safety information, system limitations, and additional operating
and feature information.