park assist INFINITI QX 2011 User Guide
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2011, Model line: QX, Model: INFINITI QX 2011Pages: 534, PDF Size: 4.33 MB
Page 416 of 534

WARNING
●Never rely solely on the hill start assist sys-
tem to prevent the vehicle from moving back-
ward on a hill. Always drive carefully and
attentively. Depress the brake pedal when
the vehicle is stopped on a steep hill. Be
especially careful when stopped on a hill on
frozen or muddy roads. Failure to prevent the
vehicle from rolling backwards may result in
a loss of control of the vehicle and possible
serious injury or death.
● The hill start assist system is not designed
to hold the vehicle at a standstill on a hill.
Depress the brake pedal when the vehicle is
stopped on a steep hill. Failure to do so may
cause the vehicle to roll backwards and may
result in a collision or serious personal
injury.
● The hill start assist system may not prevent
the vehicle from rolling backwards on a hill
under all load or road conditions. Always be
prepared to depress the brake pedal to pre-
vent the vehicle from rolling backwards. Fail-
ure to do so may result in a collision or seri-
ous personal injury. The hill start assist system automatically keeps
the brakes applied to help prevent the vehicle
from rolling backwards in the time it takes the
driver to release the brake pedal and apply the
accelerator when the vehicle is stopped on a
hill.
The hill start assist system will operate auto-
matically under the following conditions:
●
The transmission is shifted to a forward or
reverse gear.
● The vehicle is stopped completely on a hill
by applying the brake.
The maximum holding time is 2 seconds. After 2
seconds the vehicle will begin to roll back and
the hill start assist system will stop operating
completely.
The hill start assist system will not operate
when the transmission is shifted to the N
(Neutral) or P (Park) position or on a flat and
level road.
When the Vehicle Dynamic Control (VDC) warn-
ing light illuminates in the meter, the hill start
assist system will not operate. (See
“WARNING/INDICATOR LIGHTS AND AUDIBLE RE-
MINDERS” in the “2. Instruments and controls”
section.)
HILL START ASSIST SYSTEM
Starting and driving5-91
Page 419 of 534

WARNING
If the engine is not running or is turned off while
driving, the power assist for the steering will
not work. Steering will be harder to operate.
The power assisted steering uses a hydraulic
pump, driven by the engine, to assist steering.
If the engine stops or the drive belt breaks, you
will still have control of the vehicle. However,
much greater steering effort is needed, espe-
cially in sharp turns and at low speeds.
BRAKING PRECAUTIONS
The brake system has two separate hydraulic
circuits. If one circuit malfunctions, you will still
have braking ability at two wheels.
You may feel a small click and hear a sound
when the brake pedal is fully depressed slowly.
This is not a malfunction and indicates that the
brake assist mechanism is operating properly.
Hydraulically-assisted brakes
The hydraulically-assisted brake system is de-
signed to use a hydraulic pump driven electri-
cally, to assist braking. If the engine stops, you
can stop the vehicle by depressing the foot
brake pedal. However, greater foot pressure on
the foot brake pedal will be required to stop the
vehicle. The stopping distance will be longer.
Wet brakes
When the vehicle is washed or driven through
water, the brakes may get wet. As a result, your
braking distance will be longer and the vehicle
may pull to one side during braking.
To dry brakes, drive the vehicle at a safe speed
while lightly tapping the brake pedal to heat-up
the brakes. Do this until the brakes return to
normal. Avoid driving the vehicle at high speeds
until the brakes function correctly.
PARKING BRAKE BREAK-IN
Break in the parking brake shoes whenever the
stopping effect of the parking brake is weak-
ened or whenever the parking brake shoes
and/or drums/rotors are replaced, in order to
assure the best braking performance.
This procedure is described in the vehicle ser-
vice manual and can be performed by an
INFINITI retailer.
Using the brakes
Avoid resting your foot on the brake pedal while
driving. This will cause overheating of the
brakes, wearing out the brake and pads faster
and reduce gas mileage.
To help save the brakes and to prevent the
brakes from overheating, reduce speed and
downshift to a lower gear before going down a
slope or long grade. Overheated brakes may
reduce braking performance and could result in
loss of vehicle control.
POWER STEERING BRAKE SYSTEM
5-94Starting and driving
Page 430 of 534

WARNING
●If the low tire pressure warning light illumi-
nates or LOW PRESSURE information is dis-
played on the monitor screen while driving,
avoid sudden steering maneuvers or abrupt
braking, reduce vehicle speed, pull off the
road to a safe location and stop the vehicle
as soon as possible. Driving with under-
inflated tires may permanently damage the
tires and increase the likelihood of tire fail-
ure. Serious vehicle damage could occur and
may lead to an accident and could result in
serious personal injury. Check the tire pres-
sure for all four tires. Adjust the tire pressure
to the recommended COLD tire pressure
shown on the Tire and Loading Information
label to turn the low tire pressure warning
light OFF. If the light still illuminates while
driving after adjusting the tire pressure, a
tire may be flat. If you have a flat tire, replace
it with a spare tire as soon as possible.
● When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after 1 minute. Contact your INFINITI
retailer as soon as possible for tire replace-
ment and/or system resetting. ●
Replacing tires with those not originally
specified by INFINITI could affect the proper
operation of the TPMS.
● Do not inject any tire liquid or aerosol tire
sealant into the tires, as this may cause a
malfunction of the tire pressure sensors.
CHANGING A FLAT TIRE
If you have a flat tire, follow the instructions
below.
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the parking brake. Move the selector lever to
the P (Park) position.
4. Turn off the engine.
5. Raise the hood to warn other traffic, and to signal professional road assistance
personnel that you need assistance.
6. Have all passengers get out of the vehicle and stand in a safe place, away from
traffic and clear of the vehicle.
WARNING
●Make sure the parking brake is securely ap-
plied and the automatic transmission is in
the P (Park) position.
● Never change tires when the vehicle is on a
slope, ice or slippery areas. This is
hazardous.
● Never change tires if oncoming traffic is
close to your vehicle. Wait for professional
road assistance.
In case of emergency6-3
Page 437 of 534

WARNING
●Incorrect wheel nuts or improperly tightened
wheel nuts can cause the wheel to become
loose or come off. This could cause an
accident.
● Do not use oil or grease on the wheel studs or
nuts. This could cause the nuts to become
loose.
● Retighten the wheel nuts when the vehicle
has been driven for 600 miles (1,000 km)
(also in cases of a flat tire, etc.).
● As soon as possible, tighten the wheel nuts
to the specified torque with a torque wrench.
Wheel nut tightening torque: 98 ft-lb (133 N·m)
The wheel nuts must be kept tightened to speci-
fication at all times. It is recommended that
wheel nuts be tightened to specifications at
each lubrication interval. ●
Adjust tire pressure to the COLD pressure.
COLD pressure:
After the vehicle has been parked for three
hours or more or driven less than 1 mile (1.6
km).
COLD tire pressures are shown on the Tire
and Loading Information label affixed to the
driver side center pillar.
After adjusting tire pressure to the COLD tire
pressure, the display of the tire pressure infor-
mation may show higher pressure than the
COLD tire pressure after the vehicle has been
driven more than 1 mile (1.6 km). This is be-
cause the tire pressurizes as the tire tempera-
ture rises. This does not indicate a system
malfunction.
Stowing the damaged tire and tools
1. Securely store the damaged tire, jack and tools in the storage area.
2. Close the cargo floor cover.
3. Replace the cargo floor board.
4. Close the lift gate.
WARNING
Always make sure that the spare tire and jack-
ing equipment are properly secured after use.
Such items can become dangerous projectiles
in an accident or sudden stop.
If needed Roadside Assistance is available.
Please see your Warranty Information Booklet
or Roadside Assistance I.D. Card for the toll-free
number to call (U.S.) or Warranty Information
Booklet (Canada).
6-10In case of emergency
Page 438 of 534

To start your engine with a booster battery, the
instructions and precautions below must be
followed.
WARNING
●If done incorrectly, jump starting can lead to
a battery explosion, resulting in severe in-
jury or death. It could also damage your
vehicle.
● Explosive hydrogen gas is always present in
the vicinity of the battery. Keep all sparks
and flames away from the battery.
● Do not allow battery fluid to come into con-
tact with eyes, skin, clothing or painted sur-
faces. Battery fluid is a corrosive sulphuric
acid solution which can cause severe burns.
If the fluid should come into contact with
anything, immediately flush the contacted
area with water.
● Keep the battery out of the reach of children.
● The booster battery must be rated at 12
volts. Use of an improperly rated battery can
damage your vehicle. ●
Whenever working on or near a battery, al-
ways wear suitable eye protectors (for ex-
ample, goggles or industrial safety spec-
tacles) and remove rings, metal bands, or
any other jewelry. Do not lean over the bat-
tery when jump starting.
● Do not attempt to jump start a frozen battery.
It could explode and cause serious injury.
● Your vehicle has an automatic engine cool-
ing fan. It could come on at any time. Keep
hands and other objects away from it.
If needed, Roadside Assistance is available.
Please see your Warranty Information Booklet
or Roadside Assistance I.D. Card for the toll-free
number to call (U.S.) or Warranty Information
Booklet (Canada).
JUMP STARTING
In case of emergency6-11
Page 440 of 534

CAUTION
Do not keep the starter motor engaged for more
than 10 seconds. If the engine does not start
right away, push the ignition switch to the OFF
position and wait 10 seconds before trying
again.
8. After starting your engine, carefully dis-connect the negative cable and then the
positive cable (
4→3→2→1).
9. Replace the vent caps (if so equipped). Be sure to dispose of the cloth used to cover
the vent holes as it may be contaminated
with corrosive acid.
10. Put the battery cover on.
Do not attempt to start the engine by pushing.
CAUTION
● Automatic transmission models cannot be
push-started or tow-started. Attempting to
do so may cause transmission damage.
● Three way catalyst equipped models should
not be started by pushing since the three
way catalyst may be damaged.
● Never try to start the vehicle by towing it;
when the engine starts, the forward surge
could cause the vehicle to collide with the
tow vehicle.
If needed, Roadside Assistance is available.
Please see your Warranty Information Booklet
or Roadside Assistance I.D. Card for the toll-free
number to call (U.S.) or Warranty & Roadside
Assistance Information Booklet (Canada).
CAUTION
● Do not continue to drive if your vehicle over-
heats. Doing so could cause engine damage
or a vehicle fire.
● To avoid the danger of being scalded, never
remove the radiator cap or coolant reservoir
cap while the engine is still hot. When the
radiator cap or coolant reservoir cap is re-
moved, pressurized hot water will spurt out,
possibly causing serious injury.
● Do not open the hood if steam is coming out.
If your vehicle is overheating (indicated by an
extremely high temperature gauge reading), or
if you feel a lack of engine power, detect
abnormal noise, etc., take the following steps:
1. Move the vehicle safely off the road, apply the parking brake and move the selector
lever to the P (Park) position.
Do not stop the engine.
2. Turn off the climate control. Open all the windows, move the heater or air condi-
tioner temperature control to maximum
hot and fan control to high speed.
PUSH STARTING IF YOUR VEHICLE OVERHEATS
In case of emergency6-13
Page 448 of 534

WAXING
Regular waxing protects the paint surface and
helps retain new vehicle appearance. Polishing
is recommended to remove built-up wax residue
and to avoid a weathered appearance before
reapplying wax.
An INFINITI retailer can assist you in choosing
the proper product.
●Wax your vehicle only after a thorough wash-
ing. Follow the instructions supplied with
the wax.
● Do not use a wax containing any abrasives,
cutting compounds or cleaners that may
damage the vehicle finish.
Machine compound or aggressive polishing on
a base coat/clear coat paint finish may dull the
finish or leave swirl marks.
REMOVING SPOTS
Remove tar and oil spots, industrial dust, in-
sects, and tree sap as quickly as possible from
the paint surface to avoid lasting damage or
staining. Special cleaning products are avail-
able at an INFINITI retailer or any automotive
accessory stores.
UNDERBODY
In areas where road salt is used in winter, the
underbody must be cleaned regularly. This will
prevent dirt and salt from building up and
causing the acceleration of corrosion on the
underbody and suspension. Before the winter
period and again in the spring, the underseal
must be checked and, if necessary, re-treated.
GLASS
Use glass cleaner to remove smoke and dust
film from the glass surfaces. It is normal for
glass to become coated with a film after the
vehicle is parked in the hot sun. Glass cleaner
and a soft cloth will easily remove this film.
CAUTION
When cleaning the inside of the windows, do
not use sharp-edged tools, abrasive cleaners or
chlorine-based disinfectant cleaners. They
could damage the electrical conductors, radio
antenna elements or rear window defroster
elements.
WHEELS
Wash the wheels when washing the vehicle to
maintain their appearance.
● Clean the inner side of the wheels when the
wheel is changed or the underside of the
vehicle is washed.
● Inspect wheel rims regularly for dents or
corrosion. Such damage may cause loss of
pressure or poor seal at the tire bead.
● INFINITI recommends that the road wheels
be waxed to protect against road salt in
areas where it is used during winter.
CAUTION
Do not use abrasive cleaners when washing the
wheels.
Appearance and care7-3
Page 530 of 534

N
New vehicle break-in .............. 5-83
O
Odometer .....................2-6
Off-road recovery .................5-7
Oil Capacities and recommended
fuel/lubricants ................9-2
Changing engine oil and filter .......8-9
Checking engine oil level ..........8-9
Engine oil ...................8-9
Engine oil pressure gauge .........2-8
Engine oil viscosity .............9-6
Oil filter replacement indicator ......2-25
Operation, Indicators for operation ......2-23
Outside air temperature ............2-28
Outside mirrors ................. 3-28
Overheat, If your vehicle overheats ......6-13
Owner’s Manual/Service Manual order
information ................... 9-32
P
Panic alarm ................... 3-16
Parking Brake break-in ............... 5-94
Parking brake operation ..........5-19
Parking on hills ............... 5-92
Phone Bluetooth Hands-Free Phone System . . 4-96
Car phone or CB radio ...........4-95Pocket
...................... 2-58
Power Front seat adjustment ............1-2
Power door lock ...............3-4
Power outlet ................. 2-52
Power steering fluid ............8-12
Power steering system ...........5-94
Power windows ............... 2-61
Precautions Audio operation .............. 4-40
Braking precautions ............5-94
Child restraints ............... 1-30
Cruise control ................ 5-37
Driving safety .................5-8
Lane departure warning (LDW) system . . 5-20
Maintenance .................8-5
On-pavement and off-road driving .....5-6
Seat belt usage ............... 1-18
Supplemental
restraint system ......1-50
When starting and driving .........5-2
Preview function ................ 5-95
Preview Function warning light ........2-16
Push starting .................. 6-13
Push-button ignition switch ..........5-10
R
Radio ...................... 4-40
Car phone or CB radio ...........4-95
FM-AM-SAT radio with Compact Disc (CD)
player .................... 4-54
Rain-sensing auto wiper system .......2-33
Rapid air pressure loss .............5-7
Readiness for inspection/maintenance (I/M)
test........................ 9-31Rear door lock, Child safety rear door lock . . 3-6
Rear personal lights
.............. 2-66
Rear window wiper and washer switch . . . 2-34
Rear window wiper blades ..........8-20
Recorders, Event data .............9-32
Registering your vehicle in another
country ......................9-9
Remote controller (DVD) ............4-92
Remote keyless entry system .........3-15
Reporting safety defects ............9-30
Roadside assistance program . . . . . . . . . 6-2
Rollover ......................5-6
Roof Moonroof .................. 2-64
Roof rack .................. 2-60
S
Safety Child seat belts ............... 1-28
Towing safety ................ 9-21
Satellite radio operation ............4-55
Seat adjustment Front power seat adjustment ........1-2
Front seats ............... 1-2, 1-16
Seat belt(s) Child safety ................. 1-28
Infants .................... 1-29
Injured persons ............... 1-21
Larger children ............... 1-29
Precautions on seat belt usage . . ....1-18
Pregnant women .............. 1-21
Seat
belt cleaning ..............7-6
Seat belt extenders ............. 1-27
Seat belt maintenance ...........1-28
10-5
Page 531 of 534

Seat belt warning light and chime....2-16
Seat belts .................. 1-18
Seat belts with pretensioners .......1-62
Small children ................ 1-29
Three-point type ............... 1-22
Seat(s) Climate controlled seats ..........2-46
Driver-side memory ............3-30
Heated seats ................ 2-44
Seats .....................1-2
Security system, Vehicle security system . . 2-29
Security system (INFINITI Vehicle Immobilizer
System), Engine start .............. 2-31
Selector lever, Shift lock release .......5-18
Servicing climate control ...........4-40
SETTING button ................. 4-11
Shift lock release Transmission ................ 5-18
Shifting, Automatic transmission .......5-15
SNOW mode ................... 5-93
Snow mode switch ............... 2-49
Spare tire ................. 8-38, 9-9
Spark plugs ................... 8-17
Speedometer ...................2-6
Starting Before starting the engine .........5-13
Jump starting ................ 6-11
Precautions when starting and driving . . 5-2
Push starting ................ 6-13
Starting the engine ............. 5-13
STATUS button ..................4-7
Status light, Front passenger air bag .....1-57
Steering Heated steering wheel ...........2-43
Power steering fluid ............8-12
Power steering system ...........5-94Steering lock release malfunction
indicator
................... 2-23
Steering-wheel-mounted controls for
audio ..................... 4-81
Tilt/telescopic steering ..........3-26
Storage ..................... 2-54
Sun visors .................... 3-26
Sunglasses
holder............... 2-56
Supplemental air bag warning labels .....1-63
Supplemental air bag warning light . . 1-63, 2-16
Supplemental restraint system ........1-50
Precautions on supplemental restraint
system .................... 1-50
Switch Autolight switch .............. 2-37
Fog light switch ............... 2-42
Hazard warning flasher switch ......2-43
Headlight aiming control .........2-39
Headlight switch .............. 2-37
Ignition switch ................ 5-15
Intelligent Brake Assist (IBA) OFF
switch .................... 2-50
Power door lock switch ...........3-5
Snow mode switch ............. 2-49
Turn signal switch ............. 2-42
Vehicle dynamic control (VDC) off
switch .................... 2-51
T
2nd row seat .................. 2-55
3rd row seat .................. 2-56
Tachometer ....................2-7
Temperature gauge, Engine coolant
temperature gauge ................2-7 Theft (INFINITI Vehicle Immobilizer System),
Engine start
................... 2-31
Three-way catalyst ................5-2
Tilt/telescopic steering ............3-26
Tire Pressure, Low tire pressure warning
light ..................... 2-14
Tire replacement indicator . . . ......2-25
Tires Flat tire ....................6-2
Low tire pressure warning system .....5-3
Tire and Loading information label . 8-31, 9-11
Tire chains ................. 8-35
Tire dressing .................7-4
Tire pressure ................ 8-29
Tire pressure information (display) ....4-9
Tire pressure monitoring system
(TPMS) .................. 5-3, 6-2
Tire rotation ................. 8-36
Types of tires ................ 8-35
Uniform tire quality grading ........9-28
Wheel/tire
size ................9-9
Wheels and tires .............. 8-29
Top Tether strap child restraints ........1-34
Touch screen ...................4-4
Tow mode .................... 5-93
Tow mode switch ................ 2-49
Towing Flat towing ................. 9-28
Tow truck towing .............. 6-14
Towing a trailer ............... 9-17
Towing safety ................ 9-21
TPMS, Tire pressure monitoring system ....5-3
TPMS with Tire Inflation Indicator . . . . . 5-5
TPMS, Tire pressure warning system .....6-2
10-6