remote control INFINITI QX 2011 User Guide

The rear displays are located on the back of the
front head restraints.
Use the remote controller to operate the rear
display screen.
Push the preferred side (L or R) of the power
ON/OFF button on the remote controller to
activate the rear display.
The rear screens can also be activated using the
INFINITI controller. (See “REAR DISPLAY set-
tings” earlier in this section.)
Do not block the range of the wireless remote
controller receiver and wireless headphones
transmitter
1.
Rear auxiliary input jacks
The rear auxiliary input jacks are located at the
rear of the center console. NTSC/PAL compat-
ible devices can be connected to the auxiliary
jacks. The images from the connected device
can be viewed on the rear displays.
The rear auxiliary jacks are color coded for
identification purposes.
●Yellow - video input
● White - left channel audio input
● Red - right channel audio input Before connecting a device to a jack, turn off the
power of the portable device.
To display rear the AUX screen, push the pre-
ferred side (L or R) of the AUX (L)/AUX (R)
buttons (rear input jacks) on the remote control-
ler.
The connected device from the rear auxiliary
input jacks cannot be displayed on the front
screen.
SAA3329SAA3330
4-84Monitor, climate, audio, phone and voice recognition systems

Channel change :
When the rear displays are playing different
sources, slide the channel select switch to
select the sound (“A ch” is the sound on the left
display. “B ch” is the sound on the right
display.).
Remote controller
The remote controller has the following con-
trols:
1. DVD button
2. Joystick3. AUX button (front input jacks)
4. ENTER button
5. DISP (Display) button (L or R)
6.
VOLUME CONTROL button (or)
7. TRACK/CHANNEL button (or)
8. Power ON·OFF button (L or R)
9. AUX (L)/AUX (R) buttons (rear input jacks)
10. USB button
11. BACK button
12. SOUND button
13. Keypad
See “Remote controller operation” later in this
section for the function of each button.
SAA3079
SAA3158
4-86Monitor, climate, audio, phone and voice recognition systems

Select rear displays audio source :
The AUX (L) button or AUX (R) button (REAR)
selects each screen source individually
1.
The DVD button, USB button or AUX button
(Front) selects the source for front and rear
screens at once
2.
Remote controller and headphones
battery replacement
CAUTION
● An improperly disposed battery can harm
the environment. Always confirm local regu-
lations for battery disposal.
SAA3326SAA0978
SAA3081
Monitor, climate, audio, phone and voice recognition systems4-87

●When changing batteries, do not let dust or
oil get on the components.
To replace the battery:
1. Open the lid as illustrated.
● For headphones, remove the screw1
with a flat-bladed screwdriver before re-
moving the lid.
2. Replace both batteries with new ones.
●Recommended battery:
Size AA × 2 (DVD remote controller)
Size AAA × 2 (headphones)
● Be careful not to touch the battery termi-
nal.
● Make sure that the and ends on the
batteries match the markings inside the
compartment.
3. Close the lid securely.
● If you will not be using the remote control
for long periods of time, remove the bat-
teries.
● Replacement of the batteries is needed
when the remote control only functions at
extremely close distances to the Dual
Head Restraint DVD System or when it
does not function at all. FCC Notice:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment. This device complies with Part 15 of
the FCC Rules and RSS-210 of Industry Canada.
Operation is subject to the following two condi-
tions: (1) This device may not cause harmful in-
terference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation of the de-
vice.
BEFORE OPERATING DUAL HEAD
RESTRAINT DVD SYSTEM
Precautions
Start the engine when using the Dual Head
Restraint DVD System.
WARNING
The driver must not attempt to operate the Dual
Head Restraint DVD System or wear the head-
phones while the vehicle is in motion so that
full attention may be given to vehicle
operation.
CAUTION
●
Only operate the Dual Head Restraint DVD
System while the vehicle engine is running.
Operating the Dual Head Restraint DVD Sys-
tem for extended periods of time with the
engine OFF can discharge the vehicle
battery.
● Do not allow the system to get wet. Exces-
sive moisture such as spilled liquids may
cause the system to malfunction.
● While playing VIDEO-CD media, this DVD
player does not guarantee complete func-
tionality of all VIDEO-CD formats.
Parental level (parental control)
Video data with the parental control setting can
be played with this system. Please use your
own judgement to set the parental control with
the system.
4-88Monitor, climate, audio, phone and voice recognition systems

PLAYING DIGITAL VERSATILE DISC (DVD)
DISC·AUX button
Park the vehicle in a safe location for the front
seat occupants to operate the DVD player while
watching the images.
Insert a DVD into the CD/DVD slot with the
labeled side up. The DVD will be guided auto-
matically into the slot. When ejecting the DVD,
push the EJECT button.
Push the AUX·DVD button on the instrument
panel and turn the display to the DVD mode,
and begin playing DVD automatically.
When a DVD is loaded, it will begin playing
automatically.
The front screen will be turned on when the
AUX·DVD button is pushed while a DVD is being
played, and it will turn off automatically after a
period of time. To turn it on again, push the
AUX·DVD button again.
Adjust Front/Rear displays
Front display :
To adjust the front display mode, push the DISP
button on the center multi-function control
panel. Follow the instructions displayed on the
screen. Rear display :
To adjust the rear display mode, push the
preferred side (L or R) of the “DISP” (Display)
button on the remote controller.
DVD operation keys
To operate the DVD player, select the preferred
key displayed on the operation screen using the
INFINITI controller.
PAUSE :
Select the “
” key and push the ENTER
button to pause the DVD. To resume playing the
DVD, use the “PLAY” key.
To pause the DVD, it is also possible to push the
“
” button on the keypad of the remote
controller.
PLAY :
Select the “
” key and push the ENTER
button to start playing the DVD, for example,
after pausing the DVD.
To start playing the DVD, it is also possible to
push the “
” button on the keypad of the
remote controller.
STOP :
Select the “
” key and push the ENTER
button to stop playing the DVD.
To stop playing the DVD, it is also possible to
push the “
” button on the keypad of the
remote controller.
SKIP (FORWARD) :
Select the “
” key and push the ENTER
button to skip the chapter(s) of the disc for-
ward. The chapters will advance the number of
times the ENTER button is pushed.
To skip the chapter(s) forward, it is also pos-
sible to push the “
” button on the keypad
of the remote controller.
SKIP (REWIND) :
Select the “
” key and push the ENTER
button to skip the chapter(s) of the disc back-
ward. The chapters will go back the number of
times the ENTER button is pushed.
To skip the chapter(s) backward, it is also
possible to push the “
” button on the
keypad of the remote controller.
4-90Monitor, climate, audio, phone and voice recognition systems

/Commercial Skip :
This function is only for DVD-VIDEO and DVD-VR.
Select the “
”or“” key to skip
forward or backwards by the set amount as
defined in the DVD settings menu.
To skip forward or backward, it is also possible
to push the “
”or“” button on the
keypad of the remote controller.
Setting keys
Select the “Settings” key with the INFINITI
controller and push the ENTER button to adjust
the following settings.
The items indicated with“*”canalso be set
from the rear display. Push the “ DVD” button
on the remote controller while a DVD is being
played. Select the preferred item using the
joystick “
” on the remote controller and
push the ENTER “” button.
Key (DVD-VIDEO, DVD-AUDIO) :
Keys for the DVD menu operation are displayed.
: Move the cursor to select a DVD menu.
Enter: Enter the selected menu.
Move: Change the display location by moving the operation key.
Back: Return to the previous screen.
Hide: Hide the operation key.
Title Menu (front)/Menu (rear) (DVD-VIDEO) :
Menus specific to each disc will be shown. For
details, see the instructions attached to the
disc.
Front screen
SAA2498
Rear screen
SAA3082
Monitor, climate, audio, phone and voice recognition systems4-91

Title Search (DVD-VIDEO) :
A scene that belongs to a specified title will be
displayed each time the “+” side or “” side is
selected.
10 Key Search (DVD-VIDEO, VIDEO-CD, CD-DA) :
Select the “10 Key Search” key and push the
ENTER button to open the number entry screen.
Input the number you want to search for and
select the “OK” key with the INFINITI controller.
Then push the ENTER button. The specified
Title/Chapter or Group/Track will be played.
Angle (DVD-VIDEO) :
If the DVD contains different angles (such as
moving images), the current image angle can be
switched to another one.
Select the “Angle” key and push the ENTER
button. When the “+” side or “” side is
selected, the angle will change.
Angle Mark (DVD-VIDEO) :
When this item is turned on, an angle mark will
be shown on the bottom of the screen if the
scene can be seen from a different angle.Menu Skip (DVD-VIDEO) :
DVD menus are automatically configured and
the contents will be played directly when the
“Menu Skip” key is turned on. Note that some
discs may not be played directly even if this
item is turned on.
CM Skip (DVD-VIDEO) :
The amount of seconds for CM Skip can be set
to 15, 30 or 60 seconds.
DRC (DVD-VIDEO) :
DRC (Dynamic Range Compression) allows tun-
ing of the dynamic range of sound recorded in
the Dolby Digital format.
DVD Language (DVD-VIDEO, VIDEO-CD) :
Select the “DVD Language” key and push the
ENTER button to open the number entry screen.
Input the number corresponding to the pre-
ferred language and select the “OK” key with
the INFINITI controller. Then push the ENTER
button. The DVD top menu language will be
changed to the one selected.
Display :
Adjust the image quality of the screen, select
the preferred adjustment items and push the
ENTER button.Audio :
Choose the preferred language using the
INFINITI controller and push the ENTER button.
Subtitle (DVD-VIDEO) :
Choose the preferred language using the
INFINITI controller and push the ENTER button.
To turn off the subtitles, push and hold the
ENTER button until a beep sounds.
Display Mode (DVD-VIDEO, VIDEO-CD) :
Choose from the “Full”, “Wide”, “Normal” or
“Cinema” mode using the INFINITI controller
and push the ENTER button again.
Play Mode :
Choose the preferred play mode using the
INFINITI controller and push the ENTER button.
Remote controller operation
Use the remote controller to adjust the follow-
ing items.
Rear display ON/OFF :
The rear displays can be activated or deacti-
vated individually.
To activate or deactivate the rear displays, push
the preferred side (L or R) of the “ON·OFF”
button on the remote controller.
4-92Monitor, climate, audio, phone and voice recognition systems

Joystick :
Use the joystick
to select the items
displayed on the rear screen.
ENTER button :
Push the ENTER
button to make the
selected item complete on the rear screen.
BACK button :
Push to go back to the previous screen or cancel
the selection.
DVD mode :
To select the DVD mode, push the DVD button.
AUX mode :
The AUX (auxiliary input jacks) modes can be
activated or deactivated individually. To acti-
vate the AUX mode, push the preferred side (L
or R) of the AUX button. Push the AUX button
again and deactivate the AUX mode and display
another mode.
Volume :
To control the volume level, push the VOL
button
or. Display :
Display settings can be set individually for the
right and left screens.
Push the preferred side (L or R) of the DISP
button to adjust the rear display settings.
Sound :
To change the language, push the SOUND but-
ton. Each time the button is pushed, the lan-
guage will change to each language stored in
the DVD.
Track/Channel :
Push to skip to the previous or next DVD scene
selection.
Keypad :
: PLAY/PAUSE button
: STOP button
: FORWARD button
: REWIND button
: FORWARD button for commercial skip
(for DVD-VIDEO and DVD-VR) or still
images (for DVD-AUDIO)
: REWIND button for commercial skip (forDVD-VIDEO and DVD-VR) or still images
(for DVD-AUDIO)
Rear display settings
To adjust rear display setting, select the pre-
ferred key and push the ENTERbutton.
The following settings are available:
Aspect :
Select the display size from “CINEMA”, “WIDE”,
“FULL” or “NORMAL” using the joystick on the
remote controller.
Picture Mode :
To adjust the display brightness automatically,
select the “Brightness” key and then select
from “DARKER”, “NORMAL” or “BRIGHTER”.
When adjusting manually, select “OFF” and
adjust using the joystick on the remote control-
ler and tilt the joystick to the right or left.
To adjust tint, color, contrast or black level,
select a key using the joystick on the remote
controller and tilt the joystick to the right or left.
Push the BACK button on the remote controller
to apply the settings and return to the previous
display.
To return the adjustment levels to the default
value, select “Execute” next to “Initialization”
using the joystick on the remote controller and
push the ENTER
button. The “Execute”
key is deactivated when the picture mode set-
tings are already in the default value.
Monitor, climate, audio, phone and voice recognition systems4-93

Color System :
To choose the color system, select from “NTSC”,
“PAL”, “PAL-60”, “PAL-M”, “PAL-N” or “AUTO”
using the joystick on the remote controller and
tilt the joystick to the right or left.
3D Y/C filter :
Set to ON/OFF using the joystick on the remote
controller. When turned on, small characters
and an outline of the shapes will be displayed
more clearly than when turned off.
AUX Volume Setting :
To set the AUX volume, select from “HIGH”,
“LOW” or “MIDDLE” using the joystick on the
remote controller and tilt the joystick to the
right or left.
OPERATING TIPS
●The images from a device that is connected
to the rear auxiliary input jacks cannot be
viewed on the front displays.
● It is not possible to switch the source to USB
(if so equipped) or DVD using the remote
controller when the rear display is in the AUX
mode. Push the AUX (L)/(R) button in the
remote controller and turn off the AUX mode,
and then push the preferred mode switch. ●
It is not possible to display different video
files, such as DVD or video files in the USB
memory, on the front and rear displays at
the same time (models with navigation sys-
tem).
● It is not possible to play an audio file and a
video file in the same USB memory at the
same time (models with navigation system).
Multiple source display
It is possible to play different sources on each
display. The following example shows how to
operate multiple sources.
1. Display a video file in the front display by selecting the DVD mode.
2. Push the L side on the power ON·OFF button on the remote controller. The left
rear display comes on and the DVD screen
will be displayed.
3. Push the R side on the power ON·OFF button on the remote controller. The right
rear display comes on and the DVD screen
will be displayed. 4. Switch the source on the front display to
an audio source. The sound from the
speakers switches according to the front
display. The rear display continues to
display the DVD.
5. Turn on a pair of headphones and listen to the DVD on the rear displays using the
headphones.
6. Connect an auxiliary device into the AUX jacks and push the AUX (L) or AUX (R)
button on the remote controller. The se-
lected side of the rear display turns to the
AUX mode. The other rear display contin-
ues to display the DVD.
7. Turn on the other pair of headphones. If the sound from the headphones is not
from the AUX jacks, switch the channel
with the channel select switch on the
headphones.
4-94Monitor, climate, audio, phone and voice recognition systems

CARE AND MAINTENANCE
Use a lightly dampened, lint free cloth to clean
the surfaces of your Dual Head Restraint DVD
System (DVD player face, screen, remote con-
troller, etc.).
CAUTION
●Do not use any solvents or cleaning solu-
tions when cleaning the video system.
● Do not use excessive force on the monitor
screen.
● Avoid touching or scratching the monitor
screen as it may become dirty or damaged.
● Do not attempt to operate the system in ex-
treme temperature conditions [below 4°F
(20°C) and above 158°F (70°C)].
● Do not attempt to operate the system in ex-
treme humidity conditions (less than 10% or
more than 75%). When installing a car phone or a CB radio in
your INFINITI, be sure to observe the following
cautions, otherwise the new equipment may
adversely affect the electronic control modules
and electronic control system harness.
WARNING
●
A cellular telephone should not be used
while driving so full attention may be given
to vehicle operation. Some jurisdictions pro-
hibit the use of cellular telephones while
driving.
● If you must make a call while your vehicle is
in motion, the hands-free cellular phone op-
erational mode (if so equipped) is highly rec-
ommended. Exercise extreme caution at all
times so full attention may be given to ve-
hicle operation.
● If a conversation in a moving vehicle requires
you to take notes, pull off the road to a safe
location and stop your vehicle before doing
so.
CAUTION
● Keep the antenna as far away as possible
from the electronic control modules.
● Keep the antenna wire more than 8 in (20 cm)
away from the electronic control system har-
ness. Do not route the antenna wire next to
any harness.
● Adjust the antenna standing-wave ratio as
recommended by the manufacturer.
● Connect the ground wire from the CB radio
chassis to the body.
● For details, consult an INFINITI retailer.
CAR PHONE OR CB RADIO
Monitor, climate, audio, phone and voice recognition systems4-95