lights INFINITI QX30 2018 Service Manual

INFINITI QX30 2018 Service Manual QX30 2018 INFINITI INFINITI https://www.carmanualsonline.info/img/42/35107/w960_35107-0.png INFINITI QX30 2018 Service Manual

Page 143 of 438

INFINITI QX30 2018 Service Manual COMBINATION SWITCH
1Turn signal, right
2Turn signal, left
3High beam headlights
4Headlight flasher
Turn signal
Move the lever up or down to signal the
turning direction. When the turn is com-
plet

Page 144 of 438

INFINITI QX30 2018 Service Manual Active light function
The active light function is a system that
moves the headlights according to the steer-
ing movements of the front wheels. In this
way relevant areas remain illuminated while
you

Page 145 of 438

INFINITI QX30 2018 Service Manual HIGH BEAM ASSIST (LED
HEADLIGHT ONLY)
You can use this function to set the head-
lights to change between low beam and high
beam automatically. The system recognizes
vehicles with their lights on, eit

Page 146 of 438

INFINITI QX30 2018 Service Manual •High beam Assist does not recognize
road users:
–Who have no lights, e.g. pedestrians.
–Who have low intensity lighting, e. g.
cyclists.
–Whose lighting is blocked, e.g. by a
barrier.
•In v

Page 147 of 438

INFINITI QX30 2018 Service Manual If you are driving at speeds above approxi-
mately 34 MPH (55 km/h) and no other road
users are detected, the high beam headlights
are switched on automatically. The
indicator light in the combination

Page 148 of 438

INFINITI QX30 2018 Service Manual To switch off the front fog lights:
•press thebutton The greenindi-
cator light in the combination meter turns
off.
Only vehicles with front fog lights are
equipped with the “Fog lights” functio

Page 149 of 438

INFINITI QX30 2018 Service Manual WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or
have an inability to feel pain in body parts
that contact the seat. Us

Page 150 of 438

INFINITI QX30 2018 Service Manual NOTE
The seat heater can only be activated
when the ignition switch is in the ON po-
sition.
2. Start the engine.
3. Select the heat range:
•To switch on: press button1repeat-
edly until the desire

Page 155 of 438

INFINITI QX30 2018 Service Manual If the battery cable is disconnected, the clock
will need to be re-adjusted to the correct
time.
ADJUSTING TIME
Set the time using the INFINITI controller and
the [Settings] menu available in the cent

Page 163 of 438

INFINITI QX30 2018 Service Manual SKI HATCH (IF EQUIPPED)
To open the ski hatch:
1. Fold down rear seat armrest.
2. Pull the center head restraint on the rear
bench seat into the uppermost position.
3. Slide locking mechanism
1in the