light INFINITI QX30 2018 Owners Manual

is the industry standard in music recognition
technology and related content delivery. For
more information, visit www.gracenote.com.
CD and music-related data from Gracenote,
Inc., copyright
c2000 to present
Gracenote. Gracenote Software, copyright
c2000 to present Gracenote. One or more
patents owned by Gracenote apply to this
product and service. See the Gracenote web-
site for a non-exhaustive list of applicable
Gracenote patents. Gracenote, CDDB, Musi-
cID, MediaVOCS, the Gracenote logo and
logotype, and the “Powered by Gracenote”
logo are either registered trademarks or
trademarks of Gracenote in the United States
and/or other countries.
App Store
SM
Apple and the Apple logo are trademarks of
Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of
Apple Inc.
Google Play
TM
Google Play is a trademark of Google Inc.
Google
c2012 Google Inc. All rights reserved.
Google CalendarTMcalendaring application is
a trademark of Google Inc.
Compact Disc (CD) player
•Do not force a compact disc into the CD
insert slot. This could damage the CD
and/or CD player.
•Trying to load a CD with the CD door
closed could damage the CD and/or CD
player.
•During cold or rainy weather, the player
may malfunction due to the humidity. If
this occurs, remove the CD and dehu-
midify or ventilate the player completely.
•The player may skip while driving on rough
roads.
•The CD player sometimes cannot function
when the passenger compartment tem-
perature is extremely high. Decrease the
temperature before use.
•Only use high quality 4.7 in (12 cm) round
discs that have the “COMPACT disc DIGI-
TAL AUDIO” logo on the disc or packag-
ing.
•Do not expose the CD to direct sunlight.
•CDs that are of poor quality, are dirty,
scratched, or covered with fingerprints, or
that have pin holes may not work properly.
•The following CDs may not work properly: – Copy control compact discs (CCCD)
– Recordable compact discs (CD-R)
– Rewritable compact discs (CD-RW)
•Do not use the following CDs as they may
cause the CD player to malfunction. – 3.1 in (8 cm) discs
SAA0480
4-56Display screen, heater and air conditioner, and audio system

(where available), providing a better quality
sound with clear reception. When this fea-
ture is not activated or HD Radio broadcasts
are not available, you will receive analog ra-
dio (AM/FM broadcasts).
Radio source control
There are 2 elements used in the preset list
area that are associated with radio source:
1Highlight for INFINITI controller opera-
tion.
2(With triangle) Indicator of current se-
lected preset station.
Radio operation
Radio activation and band selection:
Push or select the preferred radio
band (AM, FM or SXM) from the audio
source list to turn on the radio. Each time
is pushed, the radio band will
change.
For details, see "Selecting audio source" later
in this section. NOTE
When the stereo broadcast signal is weak,
the radio will automatically change from
stereo to monaural reception.
Seeking stations/channels:
AM and FM Radio
Push
to tune from low
to high or high to low frequencies and to stop
at the next broadcasting station.
SiriusXM Satellite Radio
Push to tune to the
first channel of the next or previous category.
Scan tuning:
To tune the stations/channels, touch [Con-
trol] on the display and touch [Scan]. The
stations/channels will be tuned form low to
high frequencies and stop at each broadcast-
ing station/channel for 5 seconds. Touching
[Scan] again during this 5 second period will
stop scan tuning and the radio will remain
tuned to that station/channel.
Presetting:
Up to 36 stations/channels can be registered
for AM, FM and SXM in the preset list.
1. Select a radio band (AM, FM or SXM).
NAA1717
4-68Display screen, heater and air conditioner, and audio system

The iPod touch® may not respond quickly
with the system in some cases.
Make sure that the iPod® firmware is up-
dated.
The Lightning
TMconnector works with
iPhone® 5, iPhone® 5S, iPhone® 6, iPhone®
6 Plus, iPod touch® (5th generation), and
iPod nano® (7th generation).
The 30-pin connector works with iPhone®
4S, iPhone® 4, iPhone® 3GS, iPhone® 3G,
iPhone®, iPod touch® (1st through 4th gen-
eration), iPod classic®, and iPod nano® (1st
through 6th generation).
USB works with iPhone® 5, iPhone® 4S,
iPhone® 4, iPhone® 3GS, iPhone® 3G,
iPhone®, iPod touch® (1st through 5th gen-
eration), iPod classi®c, and iPod nano ® (1st
through 7th generation).
4-76Display screen, heater and air conditioner, and audio system

DISC/USB MEMORY DEVICE
CARE AND CLEANING
DISCS
•Handle a disc by its edges. Never touch the
surface of the disc. Do not bend the disc.
•Always place discs in their storage cases
when they are not being used.
•To clean a disc, wipe the surface from the
center to the outer edge using a clean, soft
cloth. Do not wipe the disc using a circular
motion.
Do not use a conventional record cleaner
or alcohol intended for industrial use.
•The inner and outer edges of a new disc
may be rough. Remove the rough edges by
rubbing the inner and outer edges with the
side of a pen or pencil as illustrated.
USB MEMORY DEVICE
•Never touch the terminal portion of the
USB memory device.
•Do not place heavy objects on the USB
memory device.
•Do not store the USB memory device in
very humid locations.
•Do not expose the USB memory device to
direct sunlight.
•Do not spill any liquids on the USB memory
device.
Refer to the owner's manual for the USB
memory device for details.
GRACENOTE® END USER
LICENSE AGREEMENT
This application or device contains software
from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote
(the “Gracenote Software”) enables this ap-
plication to perform disc and/or file identifi-
cation and obtain music-related information,
including name, artist, track, and title infor-
mation (“Gracenote Data”) from online serv-
ers or embedded databases (collectively,
“Gracenote Servers”) and to perform other
functions. You may use Gracenote Data only by means of the intended End-User functions
of this application or device.
You agree that you will use Gracenote Data,
the Gracenote Software, and Gracenote
Servers for your own personal non-
commercial use only. You agree not to assign,
copy, transfer or transmit the Gracenote
Software or any Gracenote Data to any third
party. YOU AGREE NOT TO USE OR EX-
PLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR
GRACENOTE SERVERS, EXCEPT AS EX-
PRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to
use the Gracenote Data, the Gracenote Soft-
ware, and Gracenote Servers will terminate if
you violate these restrictions. If your license
terminates, you agree to cease any and all
use of the Gracenote Data, the Gracenote
Software, and Gracenote Servers. Gracenote
reserves all rights in Gracenote Data, the
Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under
no circumstances will Gracenote become li-
able for any payment to you for any informa-
tion that you provide. You agree that
Gracenote, Inc. may enforce its rights under
this Agreement against you directly in its own
name.
The Gracenote service uses a unique identi-
fier to track queries for statistical purposes.
SAA0451Z
4-84Display screen, heater and air conditioner, and audio system

GIVING VOICE COMMANDS
1. Push<>located on the steering wheel.
2. A list of commands appears on the screen, and the system provides a voice menu
prompt.
When this screen is displayed, almost all of
the commands can be recognized. Available
commands for each categories can be
shown on the right side of the screen. High-
light a category listed in the left side of the
screen with the INFINITI controller to find
your preferred command.
Selecting a category by touching the
screen or pushing will execute
the command. After executing the cat-
egory command, only the commands re-
lated to the selected category can be rec-
ognized. "Command list" in the "5. Starting and
driving" section
3. After the tone sounds and the icon on the screen changes from
to, speak a
command. You can also select a command
by directly touching the screen.
The Voice Recognition system will pause
operation when the INFINITI controller is
moved. To resume operation, push <
>
on the steering wheel.
4. Continue to follow the voice menu prompts and speak after the tone sounds
until the preferred operation is completed.
To cancel the voice command, push and hold
<
>.
You can interrupt the voice prompt at any
time by pushing <
>.
Operating tips
•Speak a command after the tone.
•If the command is not accepted, the sys-
tem announces, “Please say again”. Repeat
the command in a clear voice.
•Push <>on the steering-wheel
switch once to return to the previous
screen.
•Voice commands spoken from the passen-
ger seat cannot be recognized.
•When the <>on the steering wheel is
pressed while the air conditioner is set to
the Auto mode, the system controls the air
conditioner fan speed in order to improve
voice recognition performance. When the
fan speed is set higher than the 4th speed
position, the fan speed is decreased to 4th
speed. When the air conditioner is set to
the manual mode, the fan speed does not
change. The accuracy of voice recognition
may be affected depending on the fan
speed and the air direction.
•To skip the voice guidance function and
give the command immediately, push <
>on the steering-wheel to interrupt
the system. Remember to speak after the
tone.
•To cancel the command, push and hold <>or <>on the steering-wheel.
•Push <>on the steering-wheel to stop
the voice prompt and give the command at
once. Remember to wait for the tone be-
fore speaking.
•To adjust the volume of the system feed-
back, push the volume switch on the steer-
ing wheel or use the audio system >while the system is making an an-
nouncement.
NAA1732
4-106Display screen, heater and air conditioner, and audio system

Information command
1st command2nd command Action
Information Voice Menu Connects to the INFINITI InTouchTMServices Response Specialists. Refer to the Navigation Owner's Manual
for details.
Operator Connects to the INFINITI InTouch
TMServices Response Specialists. Refer to the Navigation Owner's Manual
for details.
Where am I?* Displays the information of the current position.
Fuel Prices Displays the fuel prices.
Weather Forecast Displays the weather forecast.
Current Weather Displays the nearby weather (current weather).
Sports Scores Displays the sports scores.
Traffic Information* Turns the traffic information system on or off.
Route Information* Displays the route information.
*: Models with navigation system only.
NOTE
The Fuel Prices, Weather Forecast, Current
Weather, Sports Scores and Traffic Infor-
mation will not operate without a subscrip-
tion to SiriusXM Radio.
VOICE RECOGNITION SETTINGS
Voice recognition functions can be set.
1. Push

CUSTOMER ASSISTANCE
For assistance or inquiries about Infiniti InTouch, or to order updated map data for the navigation system (if equipped), it is recommended you
contact an INFINITI retailer.
SYSTEM UNIT
Liquid crystal display
SymptomPossible causePossible solution
The screen is too dark. The cabin temperature is too low.Wait until the cabin temperature becomes
moderate.
Screen brightness is set to the maximum darkness. Adjust the brightness setting of the screen. "Screen settings" earlier in this section
The screen is too bright. Screen brightness is set to the maximum
brightness. Adjust the brightness setting of the screen.
"Screen settings" earlier in this section
A small black spot or a small bright spot appears on the screen. This is a phenomenon typical to liquid crystal
displays. This is not a malfunction.
A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated from neon billboards, high voltage electric power
cables, ham radios or other radio devices equipped to other vehicles may adversely affect the screen. This is not a malfunction.
Image lag appears on the screen. Phenomenon typical of liquid crystal displays. This is not a malfunction.
Image motion displayed on the screen is slow. The cabin temperature is below 32 °F (0 °C). Wait until the in-cabin temperature rises to above 32 °F (0 °C).
When looking at the screen from an angle, the screen lightens or darkens. This is a phenomenon typical to liquid crystal
displays. Adjust the brightness setting of the screen.
"Screen settings" earlier in this section
TROUBLESHOOTING GUIDE
4-124Display screen, heater and air conditioner, and audio system

Functional:
SymptomPossible cause Possible solution
Keep losing my local stations. The digital coverage is slightly less than the analog
signal coverage. Verify correct operation on another station. This is
expected behavior.
Shadowing (urban/terrain) can cause reduced digi- tal coverage. Verify correct operation on another station.
Some data fields are blank. Text information is sent at the broadcaster's discre-
tion. Verify correct operation on another station. Report
station issues.
Text information is truncated / appears to be more available. The display is limited to a fixed number of charac-
ters and more data is being sent than can be shown. This is intended behavior. Refer to the Owner's
Manual for ability to access addition.
AM reception changes at night. AM stations are required by the government (FCC)
to lower their power at night. This is not a malfunction.
4-126Display screen, heater and air conditioner, and audio system

MONITOR SYSTEM
SymptomPossible cause Possible solution
The image on the display is not clear. The front of the camera lens is dirty.Gently wipe off the dirt with a damp soft cloth.
Moisture drops such as rain or snow form on the camera lens. Gently wipe off the drops with a soft cloth.
Light such as sunlight or a headlight beam from another vehicle directly enters the camera. This is not a malfunction. It will return to normal
when the light disappears.
Moisture condensation occurs in the camera lens due to rapid temperature change. This is not a malfunction. It will return to normal
after driving for short period of time.
Objects on the display may not be clear in a dark place or at night. Adjust the brightness or the contrast settings of
the screen.
The image on the display flickers. The vehicle is under fluorescent light. This is not a malfunction.
The colors of the object on the display look different from those of the actual object. This is a typical phenomenon for cameras.
This is not a malfunction.
Image does not appear on the display. The shift lever is not shifted to the R (Reverse) position.Shift the shift lever to the R (Reverse) position.
[Automatic Display with Sonar] is OFF. Set [Automatic Display with Sonar] to ON.
The image appears on the display from the wrong angle. The lift gate is open.
Close the lift gate.
The image on the display is not clearly visible. Strong light or reflected light enters the camera. This is not a malfunction.
The sensor is not detective. There is ice or snow on the sensor. Flush out ice and snow with warm water.
There is dirt, mud or wax on the sensor. Gently wipe off the dirt with a damp soft cloth.
Vertical lines appear on the image. Strong reflected light from the bumper enters the
camera. This is not a malfunction.
Display screen, heater and air conditioner, and audio system4-135

The vehicle's wheels have sensors fitted that
monitor the tire pressures in all four tires The
tire pressure monitor warns you if the pres-
sure drops in one or more of the tires The tire
pressure monitor only functions if the corre-
sponding sensors are fitted to all wheels.
Information on tire pressures is shown in the
vehicle information display. After a few min-
utes of driving, the current tire pressure of
each tire is shown in the [Serv.] menu of the
vehicle information display.
WARNING
•Radio waves could adversely affect
electrical medical equipment. Those who
use a pacemaker should contact their
electrical medical equipment manufac-
turer for the possible influences before
use.
•If the low tire pressure warning light il-
luminates or a tire pressure-related
warning is displayed by the vehicle in-
formation display while driving, avoid
sudden steering maneuvers or abrupt
braking, reduce vehicle speed, pull off
the road to a safe location and stop the
vehicle as soon as possible. Driving with
under-inflated tires may permanently
damage the tires and increase the likeli-
hood of tire failure. Serious vehicle dam- age could occur and may lead to an acci-
dent and could result in serious personal
injury. Check the tire pressure for all
four tires. Adjust the tire pressure to the
recommended COLD tire pressure
shown on the tire and loading informa-
tion label to turn the low tire pressure
warning light OFF. If you have a flat tire,
replace it with a replacement tire as
soon as possible.
•If a replacement wheel is fitted without
an INFINITI TPMS Sensor, the TPMS
will not function and the low tire pres-
sure warning light will flash for approxi-
mately 1 minute. The light will remain on
after 1 minute. It is recommended you
contact an INFINITI retailer as soon as
possible for tire replacement and/or
system resetting.
•For models with run-flat tires, although
you can continue driving with a punc-
tured run-flat tire, remember that ve-
hicle handling stability is reduced, which
could lead to an accident and personal
injury. Also, driving a long distance at
high speeds may damage the tires. – Do not drive at speeds above 50
MPH (80 km/h) and do not drive
more than approximately 93 miles
(150 km) with a punctured run-flat
tire. The actual distance the vehicle
NSD660
5-6Starting and driving