high beam INFINITI QX50 2015 Quick Reference Guide

10
first drive features
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the ACC mode.
• If the ignition switch is pushed a second time, the
vehicle will enter the ON mode.

Move the shift lever to the P (PARK) position.

Push the ignition switch to start the engine.
TURNING THE ENGINE OFF

Move the shift lever to the P (PARK) position and apply the parking brake.

Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
HEADLIGHT CONTROL

Turn the headlight control switch to the
position
1 to turn on the front parking, side

marker, tail, license plate and instrument panel
lights. Turn the switch to the
position 2 to

turn on the headlights.
AUTOLIGHT SYSTEM

The autolight system will automatically turn the headlights on when it i\
s dark and off when
it is light. The system will keep the headlights on for a period of time\
after you turn the
ignition off and all the doors are closed.

To activate the autolight system, turn the headlight control switch to t\
he AUTO position 3,
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 1 or
position 2.
HIGH BEAM SELECT

Push the headlight control switch forward
4 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator extinguishes.

Pull and release the headlight control switch 5 to

flash the headlight high beams on and off.
3
1
2
4
5
1923534_15c_Infiniti_QX50_QRG_122314.indd 1012/23/14 1:05 PM

11
Windshield Wiper and Washer Switch
Move the lever to one of the following positions to operate the windshie\
ld wipers:

1 Mist (MIST) - One sweep operation of the front wipers.

2 Intermittent (INT) - Operates the speed-sensing front wipers intermittently. The
intermittent operation speed can be adjusted by
twisting the time control ring
3 to increase or
decrease wiper speed.

4 Low (LO) - Front wipers operate at a continuous
low-speed.

5 High (HI) - Front wipers operate at a continuous
high-speed.

6 Front Washer
- Pull the lever toward you to
activate the front washer. The front wipers will
operate several times.
WIPER DRIP

Once the wiper spray cycle is finished, there will be a
short delay. Then the wipers will sweep one more time
to clear off any remaining drips from the windshield.
REAR WINDSHIELD WIPER AND WASHER

7 Intermittent (INT) - Rear wiper operates
intermittently.

8 Low (ON) - Rear wiper operates at a continuous
low-speed.

9 Rear Washer
- Push the lever forward to
activate the rear washer. The rear wiper will operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FOG LIGHT SWITCH

The headlights must be in the auto, or the low
beams
position for the fog lights to operate.

Turn the switch (inside collar) to the position 6
to turn the fog lights on.

Turn the switch (inside collar)
to the OFF position to

turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
6
MIST
OFF
INT
LO
HI1
2
3
4
5
INT
ON7
8
6
9
1923534_15c_Infiniti_QX50_QRG_122314.indd 1112/23/14 1:05 PM