windshield wipers INFINITI QX50 2015 Quick Reference Guide

11
Windshield Wiper and Washer Switch
Move the lever to one of the following positions to operate the windshie\
ld wipers:

1 Mist (MIST) - One sweep operation of the front wipers.

2 Intermittent (INT) - Operates the speed-sensing front wipers intermittently. The
intermittent operation speed can be adjusted by
twisting the time control ring
3 to increase or
decrease wiper speed.

4 Low (LO) - Front wipers operate at a continuous
low-speed.

5 High (HI) - Front wipers operate at a continuous
high-speed.

6 Front Washer
- Pull the lever toward you to
activate the front washer. The front wipers will
operate several times.
WIPER DRIP

Once the wiper spray cycle is finished, there will be a
short delay. Then the wipers will sweep one more time
to clear off any remaining drips from the windshield.
REAR WINDSHIELD WIPER AND WASHER

7 Intermittent (INT) - Rear wiper operates
intermittently.

8 Low (ON) - Rear wiper operates at a continuous
low-speed.

9 Rear Washer
- Push the lever forward to
activate the rear washer. The rear wiper will operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
FOG LIGHT SWITCH

The headlights must be in the auto, or the low
beams
position for the fog lights to operate.

Turn the switch (inside collar) to the position 6
to turn the fog lights on.

Turn the switch (inside collar)
to the OFF position to

turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
6
MIST
OFF
INT
LO
HI1
2
3
4
5
INT
ON7
8
6
9
1923534_15c_Infiniti_QX50_QRG_122314.indd 1112/23/14 1:05 PM